Counting matching models…
The model can still be print in place and print the cap separately. For those having difficulty printing the blades in place these can be printed separately too, just printing the broken section.
This is the first thing I created in MeshLab and I am really pleased with the results. My wife wants a bowl of these different sizes and colors on the table. The cat also loves playing with it, it has a peculiar roll and sound in a tile…
My wife was getting into making dumplings and I saw she was struggling with the flimsy handles on the cheap one she had so wasn't getting a nice closed edge. I first made the star edge which worked well, but needed a few more layer in the…
Hinge works by just using a piece of filament. I print with print width manual set to .3 mm and layer height about .16mm Make sure you print the lids with the lettering down on the bed. I have also uploaded two other files that have an…
This coffee distribution tool is a copy of the OCD tool, for evenly distributing the coffee before tamping. It is adjustable and I made it so the 3mm screws can lock the internal adjuster/spacer in place. however it doesn't actually need…
I created this as a project in Fusion 360 using Sculpt. I found that the printed head lends itself to heating with a blow torch/heat-gun to soften and manipulate the edges if you want them a bit more random and organic if making a bunch…
I created this wine rack after watching Joe Telling(3d Printing Nerd https://www.thingiverse.com/thing:2744127 ) printing his wine rack, while looking cool, I thought it was a lot of plastic and wanted something a bit more minimalist and…
This is a container for two weeks supply of pills, will also upload some lids am/pm. You can obviously seperate the groups and print the lids in seperate colours. I manually change the print width to .3mm and print with a .4 nozzle, no…
I wanted a rubish bin with a bit more strength as opposed to a bin made in vase mode and breaks or deforms. Sure it takes longer to print but it will last. Print in PETG if its going to be in direct sunlight. Category: Household
I just printed this on my Bambu CX1 with 3 outlines and 25% infill. The plunger works perfectly when just right, might need to scale slightly to get right fit, .1mm scaling makes all the difference.
I was looking a various fidgets and found one that is typically made out of chain links and key ring rings. I couldn't find anyone had designed on to print so thought I would give it a crack. Quite pleased it worked first iteration. It is…
I bought a set of maple wood musical spoons as a souvenir, when I was in Canada. I thought it would be a bit of fun to make a 3d printed set and to my pleasure it worked first print and iteration. To my surprise it doesn't look like…
I wanted a decent bottle for my BBQ rubs. The grate style top, breaks up any clumps. Works really well Category: Kitchen & Dining
Need a replacement stand/Filling Chamber Tool you could 3d print fdm by placing logo below plate and print flat, however better suited for resin printing
I originally created this as a model for fdm printing. I found with my SLA printer scaling it down, combining the parts made for a good model to print. I print it standing upright with 6 heavy supports on the stem only, no problems. Can…
Created this for printing on my Elegoo Mars, and found it can be scaled incredibly small. Category: Sculptures
This is a single dose hopper for a Sette Grinder. It doesn't need support, it prints it's own breakaway support, you print it upside down. Category: Kitchen & Dining
This is a case to house the brew controller for the collaborative system now known as the ArdBir whilst the concept was started by Mathos and many have added to it. Here is my pennys worth to put it in. I have put it here for some in the…
These attachment layers (ALs) assist in holding prints on your build plate when using an SLA printer. The Ameralabs article below escribes the benefits of using attachment layers.…
These are all currently available results.
