Counting matching models…
More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://www.printables.com/model/1080601-christmas-angels-christmas-tags-christmas-ornament
Ein kleiner Kürbis zur Dekoration oder als kleines Geschenk, mit einem kleinen Loch im Stiel zum Aufhängen. Für den Druck benötigen Sie keinen Multi-Extruder, da Kürbis und Stiel separat gedruckt werden. Um den Stiel am Kürbis zu…
Before attaching the plate to the wall, first screw the hand onto it. Make a small mark on the underside of the panel so that the hand is fixed in the correct position later. I have added a pin in case you prefer to have your hand come…
Another variety of Christmas tags
Tag s to decorate the Christmas tree or gifts
A humorous addition to your footwear or your base cap - just for fun. Please check beforehand whether the print matches. With genuine Crocs, the wings will only fit if you loosen the strap fastenings and use longer screws.
More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://makerworld.com/de/models/798763#profileId-738352 https://www.printables.com/model/1069170-christmas-tags-christmas-ornaments
Boxhandschuh als Schlüsselanhänger Boxing glove keychain
PLA 4 Walls 0.2 mm Layer Hand: 100 % Infill Rod: 60 % Infill, support only on the plate
Am Tisch oder im Regal zu befestigender Sammelbehälter, in dem man alles Mögliche sammeln kann, nicht nur am Schreibtisch, auch im Badezimmer einsetzbar. Filament-Reste, Müll, Fernbedienung, Büroklammern, Gummibänder, Smartphone,…
Simple printing of bags that are only folded. If you want it to be multicolored, you should change the filament after the first 2 layers. This refers to a layer height of 0.16 mm. You can also use this with an LED tealight. @TechDino has…
Decorate the frames of your doors
So that nothing goes wrong when decanting and I don't need 3 hands, I have developed a funnel that can be screwed onto a soda bottle. I also use it to transfer silica balls into a container. I also made a funnel with an integrated sieve:…
The dinosaurs are all the same size, but the hole in the middle varies.
A little guardian angel that protects everyone who walks through this door, and not just at Christmas.
You will need a multi-color printer for this model. The 0.4 mm nozzle is not quite as fine, but it also works. The 0.2 mm nozzle is finer.
I’ve provided print files for two different sizes. Of course, you can also scale the model up yourself. However, scaling it down won’t work, as the threads would become too thin. Natürlich kannst du das Modell auch selbst vergrößern. Eine…
Quickly printed for your Halloween party.
A narrow shelf that is attached to the shower rail. Two sizes.
I created the opening so that a piece of filament fits through. If it is too narrow for you, you can of course print the model larger.
Ich habe für dieses Modell transparentes PLA in Orange und dunkelgrünes PLA verwendet. Kleber wird nicht benötigt, die Teile werden einfach zusammengeklebt.
Originally made as a coaster, I turned it into a painting stencil.
Triominos Placement game for four people The rules of the game The aim of the game is to score as many points as possible by placing the matching tiles. The points that can be scored during a game are based on the numbers of tiles played…
Gedruckt in PETG @60 % Füllung @Verhindert, dass Ihr Rucksack im Schmutz liegt.
So that it can also be printed with a single extruder, I made the cup and the contents to print separately.
Bracket for vertical wall mounting of a 1st generation Alexa. Printed with PLA.
You only print the container and use a lid from a soda bottle
A small decoration for Halloween. For the flies with magnets, I have added a break in the print profile so that you can insert the magnet. Printed in black and transparent PLA. 0.12mm layer, 2 walls, 15% infill
Einen ähnlichen Clip gibt es hier schon, der bei mir aber immer wieder gebrochen ist, egal, ob ich PLA oder PETG verwendet habe. Deshalb habe ich einen ähnlichen kreiert, der allerdings aus 2 Teilen besteht, sodass ich die Druckrichtung…
The holder is stuck to a suitable place with double-sided adhesive tape, the cables are inserted, and the cover is screwed on. Whether you print the covers in color is of course up to you.
3-part model - floor, roof and gong. All parts are printed without support. The roof poles are simply inserted into the holes in the edge of the base, the gong is hung on a thin cord. Printing instructions for the gong: Layer thickness…
Safe decanting from one bottle to another. Screw the adapter onto the bottles one after the other and then turn them over. I also made a new version with an integrated sieve. You have to print this with support.
Bei diesen Boxen hast Du die Wahl, wie viele Böden Du benötigst und wie diese angeordnet werden sollen. Auch die Farbgestaltung bleibt natürlich Dir überlassen.
Das Modell ist auch 2-teilig, aber ohne Kleber einfach zusammensteckbar
https://www.mathematische-basteleien.de/abakus.htm https://sciencing.com/use-chinese-abacus-2290925.html If you are printing the original size, simply use pieces of filament for the rods.
So everything is tidy and ready to hand
I printed it with Prusament PETG, without support. But I think PLA works just as well.
A simple and inexpensive way to create space under the desk. With 3D printing came not only the printer and the filament, but also a lot of required space. That's why I created this space under the desk. I bought some simple, commercially…
I have integrated a sieve to separate solid and liquid components. This funnel can be used for both filling and pouring. It is printed with support.
Ich habe verschiedene Variationen von Pilzen gemacht, denn es gibt auch verschiedene Größen an Händen. Hiermit können auch Kinder sich am Stopfen ausprobieren. Die Pilze können auch nur zur Dekoration aufgestellt werden, oder als…
For faster filament spool replacement, I developed this extension to install two spools on the printer at the same time.
I did it just for fun. You just need a little support for the ears. Have fun printing, and maybe you would like to show me your result. Ich habe es nur zum Spaß gemacht. Man braucht nur eine kleine Stütze für die Ohren. Hab' Spaß beim…
Entirely manufactured using 3D printing. The rear section does not rotate but serves to stabilize the structure. Optionally, you can also print the counter-rotating wheel. The size is designed for the A1 mini but can also be scaled up.…
For this model you need an empty pusas coil and 4 ball bearings 608 ZZ. If it does not have to run too smoothly, you can also print the ball bearings. The top plate has a small marking on the underside to make it easier to find the…
There are already some plant supports like this, but I wasn't entirely satisfied with their durability. That's why I made one to screw together. It holds better and can also be extended in height. To make it even more durable, it is of…
My charms are screwed on so that they stay in place and don't twist easily.
A small decoration for your Crocs, shoes, or shirt.
I have tried to create it in such a way that it is also easy to print with a 0.4 mm nozzle. The first printing plate contains all 5 motifs, the others only have one disk each. Have a nice Valentine's Day everyone.
Sollte Ihr Gepäck auf einer Reise verloren gehen, lässt es sich zu Ihnen zurückverfolgen. Aus eigener Erfahrung weiß ich, dass es sinnvoll ist, immer Ihre E-Mail-Adresse anzugeben. Legen Sie auch ein solches Etikett mit Ihren Angaben in…
Printed in PLA light and dark gray with a layer height of 0.2 mm.
This is a hug for friends that you can also send by post. You can vary the size, but it should not be smaller than 50 mm, otherwise the font will not print properly. Please note that if you change the size, the height of 2.2 mm and the…
When you take something out of the bowl, be careful that the hand doesn't pull you into it. The model consists of 2 parts, in which are screwed together. The parts can also be used separately. If you want to use only the hand, I also…
Decoration for the Christmas tree or as a gift tag
Gedruckt in PLA weiß und transparent. @@Natürlich kannst du das Modell auch für lustige Dinge verwenden, wie zum Beispiel als Dekoration für einen Junggesellinnenabschied.
If it should be too big or too small, you can adjust it in the slicer e.g. with 95% or 105%. Wenn es zu groß oder zu klein sein sollte, können Sie es im Slicer z.B. mit 95% oder 105% anpassen.
A variation of spiders, with and without webs. For the bamboo slicer, I added breaks to insert the magnet. Printed in PLA, 0.16 mm layer.
I printed this model with a 0.2 nozzle and 0.6 layer. In BambuStudio I was able to assign different filaments to the individual color layers. With a one-color printer, the filament change has to be done manually.
A pin for your hair to "decorate" your head for Christmas and a bigger hat maybe for your EchoDot, camara or else
You can print this table with one or two levels. The height of the table varies with the number of rods you print. Useful for putting something down so that it doesn't lie in the dirt, and you can find it again quickly. The table can be…
Printed in PLA, 0.16 mm layer, filament change in the 3rd layer. To assemble, fold all edges inwards and insert the sides into the base. The sides of the lid go into the box. To close, push the two side tabs of the lid into the sides.
To avoid the print having the same orientation as the folded edges, I defined the pattern for the bottom layer as “concentric”. This allowed me to rotate the model by 45° to enlarge it. However, the layer height of 0.16 mm must remain.…
These cupholders are available in 2 sizes. They can be screwed together and are therefore easier to transport.
This model requires some skill and glue for the air plant. Start with the size S leaf and glue it to the center of the ball. The size XS leaf is twisted round and glued in place, and then glued to the center of the ball. Then the sizes M,…
Anyone who has ever lost a screw when loosening an appliance can certainly relate to this. This is a small bowl with an outlet opening, in which you can store the screws temporarily until you need them again. I also use it for pins so…
I made this luggage tag for our vacation. To protect the paper from moisture, I simply laminated it without the paper, cut it to the right size, and placed it over the address as protection.
An Autumnal Decoration For the house, you'll need 2 filaments: transparent orange PLA and black PLA. You’ll need to switch filaments on the 4th layer. Place the house on the base plate, then screw on the pumpkins and the cat. You’ll only…
It started with a Pumpkin Bowl Then, I thought it could be a Scary Pumpkin Bowl Hm, the hand could be a little bit larger Or it could be a hat Or with the stem of a pumpkin And perhaps the stem a little bit higher Or with LED candles And…
Printed in PLA, 0.16 mm Layer, Filament Change in Layer 8 and 11.
Decorate your garden shoes with pumpkins. I've also included a pin that you can use to tie your hair into a bun. The parts are screwed together. If you're printing without AMS, you'll need a little glue to attach the stem.
An Autumnal Decoration For the house, you'll need 2 filaments: transparent orange PLA and black PLA. You’ll need to switch filaments on the 4th layer. Place the house on the base plate, then screw on the pumpkins and the cat. You’ll only…
Each flower pick consists of two parts (the heart and a stick) that are simply inserted into each other. If the stick does not fit properly, simply cut off 2 mm.
Turn your tea party with Teddy and doll into a hot chocolate party.
My first attempt with PLA was not stable enough for me, so I printed it again with TPU for AMS. This made it perfect, and the slight flexibility makes it very easy to handle. It's also great for potting and repotting plants. The model is…
The Prusa spools do not hold on the AMS lite because the center hole is too small. To prevent them from falling off, I developed this adapter, which is plugged onto the spool between the AMS lite and the Prusa spool.0 For easier placement…
Druckereinstellung: Wandlinien: 0 untere Schichten: 5 obere Schichten: 4 Füllmuster: Gyroid Printer setting: Wall lines: 0 lower layers: 5 upper layers: 4 Fill pattern: Gyroid
Inlet for the great model of HribaDesign
Collection container for the pooped filament for the Bambu Lab A1 (mini), which is attached to the desk.
Simple printing of sachets that are only folded. If you want it to be multicolored, you should change the filament after the first 2 layers. This refers to a layer height of 0.2 mm. As a bonus, I added a little bag for Thanksgiving.…
Spice up your Crocs—or any other gardening shoes with matching holes. All my Crocs charms are screwed on tightly so they
These balls can be used in a variety of ways. On the beach for boccia/boules, in the water to throw the ball to each other, or as a ball for a sand ball track, and much more. Printed without support. To print the ball in multiple colors,…
Another filament clip - specially developed for Prusa spools. It can be attached in several places on the inside of the spool and also remain there during printing. Unfortunately, it does not yet work if the spool is still too full, as…
Ready for the coming planting season? This time I made a larger plant support. The parts are screwed together so that they can't slide apart. I used PETG for better durability. Please remove the support carefully before screwing together,…
I printed in PLA. You still need 2 magnets 10 mm x 2 mm, which are simply clamped into the back. If necessary, they can also be glued - I didn't need to.
I used PETG for better durability. Please remove the supports thoroughly before screwing the parts together, otherwise the walls could break. The screwing is done in the order of the pressure plates.
Small anchor so that the wind doesn't blow your beach towel away. I have printed it in PETG so that it is more durable.
Das Modell besteht aus 2 Teilen, die zusammengeschraubt werden.
Centerpiece for the wheels of our lawn mower Mittelstück für die Räder unseres Rasenmähers.
PLA 0.16 mm Layer Filament Change 3. Layer Please watch the video below for assembly instructions. https://vm.tiktok.com/ZNe3HbP12/
My charms are screwed on so that they stay in place and don't twist easily.
A small bag for Halloween to give away sweets or put a LED tea light in. Printed in PLA. 0.16 mm Layer With a larger printing plate, you can of course also print it larger. Please watch the video below for assembly instructions.…
Ich habe den Deckel in PETG gedruckt - mit Support.
Picture frames in 2 sizes, easy to print, no support, no glue. If you insert a break in the slicer in lines 7 and 11 with a 0.2 mm layer, you can also print without AMS. I wish you a happy Valentine's Day.
These are all currently available results.
