P
PrintablesZerwasMOD
Powder Funnel for Reloading
I remixed the funnel with a bigger hole with about 7mm in diameter. Since I am also reloading more coarse powders like VV N570 that need a whole funnel hole.
- Downloads
- 172
- Likes
- 20
- Rating
- 5
All models
Counting matching models…
P
PrintablesZerwasMOD
.308 Winchester Insert for Region 420 Funnel System
I made an insert for my .308 Winchester. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 164
- Likes
- 7
- Rating
- 5
P
PrintablesZerwasMOD
Material Efficient 100 Rounds Reloading Tray 9mm to .40S&W
I created this material efficient reloading tray for 100 pistol cases suitable from 9mm up to .40 S&W, as can be seen in the picture. It holds 100 rounds in a staggered 10x10 pattern. The filament needed is less than 45 grams and printing…
- Downloads
- 125
- Likes
- 19
- Rating
- 0
P
PrintablesZerwasMOD
.30-06 Springfield Insert for Region 420 Funnel System
I made an insert for my .30-06 Springfield . I based my measurement on CIP chamber data plus a tolerance of 0.2mm of the diameters H2 and P2.
- Downloads
- 77
- Likes
- 1
- Rating
- 0
P
PrintablesZerwasMOD
6.5x55 SE Attachment for Region 420 Funnel System
I made an insert for my 6.5x55 SE . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 68
- Likes
- 1
- Rating
- 5
P
PrintablesZerwasMOD
6.5 PRC Insert for Region 420 Funnel System
I made an insert for my 6.5 PRC . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 67
- Likes
- 3
- Rating
- 0
P
PrintablesZerwasMOD
.300 Winchester Magnum Insert for Region 420 Funnel System
I made an insert for my .300 Winchester Magnum . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 57
- Likes
- 1
- Rating
- 0
P
PrintablesZerwasMOD
.300 AAC Blackout Insert for Region 420 Funnel System
I made an insert for my .300 Blackout . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 56
- Likes
- 3
- Rating
- 0
P
PrintablesZerwasMOD
.243 Win Insert for Region 420 Funnel System
I made an insert for a .243 Win. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters. I would appreciate if someone would be able to verify a good fitting.
- Downloads
- 49
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
Material Efficient 12 Gauge Reloading Tray for 25 rounds
I created this material efficient reloading tray for 25 shot shells for 12 gauge. It holds 25 shot shells in a staggered 5x5 pattern. The filament needed is ca. 46 grams and printing time in 0.30mm DRAFT setting is less than 3 hours.
- Downloads
- 46
- Likes
- 7
- Rating
- 0
P
PrintablesZerwasMOD
.300 PRC Insert for Region 420 Funnel System
I made an insert for my .300 PRC I based my measurement on CIP chamber data plus a tolerance of 0.2mm of the diameters H2 and P2.
- Downloads
- 46
- Likes
- 4
- Rating
- 5
P
PrintablesZerwasMOD
.338 Lapua Magnum Insert for Region 420 Funnel System
I made an insert for my .338 Lapua Magnum . I based my measurement on CIP chamber data plus a tolerance of 0.2mm of the diameters H2 and P2.
- Downloads
- 45
- Likes
- 1
- Rating
- 0
P
PrintablesZerwasMOD
8x57 IS Insert for Region 420 Funnel System
I made an insert for my 8x57 IS . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 45
- Likes
- 1
- Rating
- 5
P
PrintablesZerwasMOD
7.62x39 Attachment for Region 420 Funnel System
I made an insert for my 7.62x39 . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 45
- Likes
- 2
- Rating
- 5
P
PrintablesZerwasMOD
9x19mm / Parabellum Insert for Region 420 Funnel System
I made an insert for 9x19mm / Parabellum. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 44
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
.357 Magnum Insert for Region 420 Funnel System
I made an insert for .357 Magnum. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 38
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
.45 ACP Insert for Region 420 Funnel System
I made an insert for .45 ACP . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 37
- Likes
- 1
- Rating
- 0
P
PrintablesZerwasMOD
7mm PRC Insert for Region 420 Funnel System
I made an insert for 7mm PRC. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 33
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
Material Efficient 50 Rounds Reloading Tray for .458 Socom
I created this material efficient reloading tray for 50 cases .458 Socom. It holds 50 rounds in a staggered 5x10 pattern. The filament needed is less than 50 grams and printing time in 0.30mm DRAFT setting is less than 3 hours.
- Downloads
- 28
- Likes
- 4
- Rating
- 0
P
PrintablesZerwasMOD
.50 BMG Insert for Region 420 Funnel System
I made an insert for a .50 BMG. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters. I would appreciate if someone would be able to verify a good fitting.
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
PrintablesZerwasMOD
6.5 Grendel Insert for Region 420 Funnel System
I made an insert for the 6.5 Grendel. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesZerwasMOD
.44 Magnum Insert for Region 420 Funnel System
I made an insert for .44 Magnum. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 23
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
7x57 Insert for Region 420 Funnel System
I made an insert for a 7x57 or 7x57R. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters. I would appreciate it if someone would be able to verify a good fitting.
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
.408 Chey Tac Insert for Region 420 Funnel System
I made an insert for a .408 Chey Tac. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters. I would appreciate if someone would be able to verify a good fitting.
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesZerwasMOD
.40 S&W Insert for Region 420 Funnel System
I made an insert for .40 S&W. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
.284 Win Insert for Region 420 Funnel System
I made an insert for a .243 Win. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters. I would appreciate it if someone would be able to verify a good fitting.
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
7-6.5 PRCW Insert for Region 420 Funnel System
I made an insert for the 7-6.5 PRWC Wildcat caliber. I based my measurement on CIP chamber of the 6.5 PRC with neck diameter of the 7mm PRC. Tolerance of 0.2mm on the diameters have been added. I would appreciate it, if someone would be…
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
.500 S&W Insert for Region 420 Funnel System
I made an insert for .500 S&W. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
3_-_Edge_Pro_Apex_Remix
Leadingedge asked me to kindly remix his other Fine Tune Adapters. So here they are. The threading is more coarse. Especially with more ridgid PETG makes it easy to assemble. I have chosen to make a wider threading, isometric M14x2, so…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
6_-_Longmen_10mm_Rod_Remix
Leadingedge asked me to kindly remix his other Fine Tune Adapters. So here they are. The threading is more coarse. Especially with more ridgid PETG makes it easy to assemble. I have chosen to make a wider threading, isometric M14x2, so…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
1_-_Hapstone_M2_R1__V6_Remix
Leadingedge asked me to kindly remix his other Fine Tune Adapters. So here they are. The threading is more coarse. Especially with more ridgid PETG makes it easy to assemble. I have chosen to make a wider threading, isometric M14x2, so…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
2_-_Hapstone_V7_Remix
Leadingedge asked me to kindly remix his other Fine Tune Adapters. So here they are. The threading is more coarse. Especially with more ridgid PETG makes it easy to assemble. I have chosen to make a wider threading, isometric M15x1.5, so…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesZerwasMOD
7_-_Leading_Edge_Remix
Leadingedge asked me to kindly remix his other Fine Tune Adapters. So here they are. The threading is more coarse. Especially with more ridgid PETG makes it easy to assemble. I have chosen to make a wider threading, isometric M14x2, so…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesZerwasMOD
Seckit Sk-go cable chain mount Remix for printable chain
I have created this remix from the original authors STLs because I wanted to print my own cable chain and not buy a plastic part from Amazon . We are makers! This is the cable chain I made these mounts compatible with.…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
These are all currently available results.