Counting matching models…
There a two types of roller, one with bearings and one without them but i think they are necessary considered the weight. BOM: n° 1 M8 threaded rod ( for a single "Section" use about 155 mm of rod) n° 8 washers for 1 section n° 4…
This block helps to ensure that, while tensioning the voron legacy xy belts, the gantry remains square to the frame. You just need to push the gantry to the front idlers and then lock the blocks behind it The hardware required are n°4…
There a two types of roller, one with bearings and one without them but i think they are necessary considered the weight. EDIT: new body version with tighter holes for the lower rods BOM : n° 2 22x8x7 bearings n° 4 M8 washers n° 1 150mm…
EDIT: updated the design and improved the position of the mounting holes + longer version Mounts for the Y end stop for the tronxy xy2 pro. 2 versions: 1 short 1 long It mounts in the same spot. It helps to take back printing space from…
LEVRIERO BED MOUNT EDIT I'm going to upgrade this part by adding a belt blocking system in order to keep the belts as low as possible This mount uses 350mm MGN12H linear rail. You can use the same bolts and nuts from the stock mount. to…
I really like this screwdriver but it's really meant for smartphone and little components, so i design 2 handles capable of delivering an increased ergonomy and to develop an higher tightening torque. It is designed to be printed with a…
Optimized for 0.6 nozzle EDIT: updated roller to block the bearing so it stays flush with the roller side surface BOM: n° 1 M8 threaded rod ( for a single "Section" use about 13 cm of rod) n° 8 washers for 1 section n° 4 autolocking nuts…
Bender Rodriguez from Futurama. Features interchangeable mouths The BOM for this project is really a shortlist: N. 2 M3 heatset insert 5x4mm N. 12 6x3mm magnet N. 2 M3 20mm bolts DOWNLOAD THE PDF “TO PRINT PART LIST” 3D PRINTING SETTINGS…
These are all currently available results.
