P
Printablesxwing
60T GT2 pulley
60-tooth GT2 pulley with 5 mm bore. Support yes Print with 5 perimeters, infill 50%, filament PETG, layer 0.1 mm.
- Downloads
- 1,102
- Likes
- 41
- Rating
- 0
All models
Counting matching models…
P
Printablesxwing
Rotary encoder Knob
Rotary encoder knob, diameter 20 mm, optimized for KY-040
- Downloads
- 693
- Likes
- 43
- Rating
- 4.89
P
Printablesxwing
RPLIDAR A1 Case
RPLIDAR A1-M8 case, suitable for all hardware versions. Using the upper or lower top closure depending on the length of the motor axis of your lidar, depends on the hardware version (R1, R2, R3), the difference between the two parts is…
- Downloads
- 390
- Likes
- 8
- Rating
- 0
P
Printablesxwing
NASA Keychain
keychain with nasa logo Print instructions layer 0.2 mm infill 20% print the parts with white for the base and red for the characters, join with cyanoacrylate
- Downloads
- 299
- Likes
- 78
- Rating
- 4.83
P
Printablesxwing
flower pot
Simple flower pot, printing time, 0.2 mm layer, about 3h8m.
- Downloads
- 288
- Likes
- 19
- Rating
- 0
P
Printablesxwing
Nema 17 Timing Belt Reduction
Nema 17 stepper motor timing belt reduction, ratio 1: 4. Required hardware: 2 x F686ZZ ball bearing 2 x threaded inserts M3 2 x Socket Set Screw M3 6mm 4 x Nuts M3 4 x Screws M3 35 mm 1 x GT2 Timing Belt 6mm Belt 200 mm 1 x GT2 Timing…
- Downloads
- 202
- Likes
- 28
- Rating
- 0
P
Printablesxwing
40 Tooth GT2 Pulley
40 Tooth GT2 pulley, bore 8 mm, height 10 mm, print with layer 0.12 mm, fill 50%.
- Downloads
- 201
- Likes
- 9
- Rating
- 0
P
Printablesxwing
Beagle Camera Tripod adapter
Tripod adapter for the Mintion Beagle Camera, a 1/4 inch threaded insert is required. No supports needed, 15% infill, layer 0.2 mm.
- Downloads
- 120
- Likes
- 14
- Rating
- 5
P
Printablesxwing
Support for RPlidar c1
Support for the Slamtec RPlidar C1 lidar, it is designed to house the connection cable and the USB UART converter inside, in order to reduce the amount of wiring cables, a 12 mm hole must be provided, to pass the USB cable, on the surface…
- Downloads
- 116
- Likes
- 2
- Rating
- 0
P
Printablesxwing
Arduino Keychain
A simple keychain inspired by Arduino logo. Print the outer and the inner part with different colors, lock into place together. Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 mm Infill: 15%
- Downloads
- 100
- Likes
- 30
- Rating
- 5
P
Printablesxwing
L298 Board support
Support for L298 bridges, single and double.
- Downloads
- 98
- Likes
- 3
- Rating
- 0
P
Printablesxwing
BL192 E192 Motor Mounting Bracket
Mounting bracket for BL192 and E192 DC motors from Micromotors. Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 mm Infill: 50%
- Downloads
- 70
- Likes
- 18
- Rating
- 5
P
Printablesxwing
UFO Classic Refrigerator Magnets
UFO Classic Refrigerator Magnets Print the three pieces with the color you prefer, the cylindrical joint is used to ensure perfect alignment during assembly. Glue the joint to the upper part, the smaller one, and insert, gluing, the two…
- Downloads
- 59
- Likes
- 12
- Rating
- 5
P
Printablesxwing
Robot chassis
Simple robot chassis, 20 cm diameter, two motors with 100/110 mm wheels, third support point with 40 mm omniwheel.
- Downloads
- 51
- Likes
- 6
- Rating
- 0
P
Printablesxwing
Support for Arducam TOF
Arducam TOF camera support, print with 0.2 layer in PLA or PETG
- Downloads
- 51
- Likes
- 2
- Rating
- 5
P
Printablesxwing
Simple refrigerator Magnet
Simple refrigerator Magnet, Press four 6x3 mm magnets into the holes at the bottom. Print time ~3h10m, layer 0.1 mm, no supports.
- Downloads
- 47
- Likes
- 3
- Rating
- 0
P
Printablesxwing
LiPo Carrier
Carrier for LiPo battery, up to 4 cells and 5200 mAh Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 mm Infill: 30%
- Downloads
- 43
- Likes
- 4
- Rating
- 0
P
Printablesxwing
Modified chassis for jetbot
I have modified the standard chassis for Nvidia's Jetbot so that I can use the WiFi module on M2 slot of the 4GB Jetson Nano card. The modification involves the addition of two housings for M3 threaded inserts, to be hot inserted, and a…
- Downloads
- 43
- Likes
- 2
- Rating
- 0
P
Printablesxwing
Prusament spool adapter
Simple diameter adapter to use the prusament spool with the Argento9899 horizontal spool holder .
- Downloads
- 41
- Likes
- 5
- Rating
- 5
P
Printablesxwing
Radxa X2L plate
Tabletop support plate for Radxa X2L, compatible with the presence of the SSD on the bottom side of the board. Print in PLA or PETG, layer 0.2 mm, no supports.
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
Printablesxwing
PI Camera tilt case
box for picamera with tilt. You need a 9g servo and two 10x6x2.5mm ball bearings. Supports: No Resolution: 0.2 mm Infill: 15% filament PLA or PETG.
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
Printablesxwing
Parallax Stingray upper floor
Parallax Stingray Chassis upper floor for electronics and sensors. Openings are provided for four Sharp analog/digital rangefinders. On the upper floor it is possible to install a Pi Camera and a RPLIDAR A1 or A2 Note: due to the size, a…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
Printablesxwing
DDSM400 Support
Mounting support for servo motor Waveshare DDSM400, print with layer 0.15 mm, fill 40%.
- Downloads
- 14
- Likes
- 0
- Rating
- 0
These are all currently available results.