P
Printablesgrappeq
NVMe drive case
A simple case to hold a single NVMe drive. My printing settings Material: PLA Nozzle: 0.6mm Layer height: 0.35mm Infill: 15% (doesn't really matter)
- Downloads
- 862
- Likes
- 77
- Rating
- 5
All models
Counting matching models…
P
Printablesgrappeq
Small SODIMM RAM stick case
The case comes in 2 versions Small - fits 2-3 RAM sticks (depending on the thickness) Large - fits 4-6 RAM sticks The bottom piece differs for both versions while the top one stays the same. Compatibility SO-DIMM Generation Version to use…
- Downloads
- 424
- Likes
- 50
- Rating
- 4.78
P
Printablesgrappeq
Standing case for Raspberry Pi Pico with 16x2 LCD display
A case to hold your Raspberry Pi Pico together with a 1602/16x2 LCD display. Designed to be standing on a flat surface. The screen is tilted at a ~30 degree angle so it's easier to see from above. Has a hole in the back to lead the…
- Downloads
- 272
- Likes
- 19
- Rating
- 5
P
Printablesgrappeq
Modular bird spikes
I really like pigeons but I don't like cleaning their shit so recently I have embarked on a quest to stop them from nesting on my balcony for the third time. Those models are the results of that struggle. Spikes can mounted to different…
- Downloads
- 245
- Likes
- 30
- Rating
- 5
P
Printablesgrappeq
Single UMD case/cover
Snaps on the UMD and protects the bottom from scratches. Also reduces the movements inside by pushing on the disk through the spindle window. Takes only 7g of filament to print. Optimized for printing using 0.6 mm nozzle and 0.3 mm layers…
- Downloads
- 229
- Likes
- 36
- Rating
- 5
P
Printablesgrappeq
Roan stroller cup/bottle holder
A sturdy cup holder that allows you to bring coffee to adventures with your young one. The cup holder attaches to the mount using a thumb screw so can be remove and reattach it without use of any screws. The mounting angle can also be…
- Downloads
- 181
- Likes
- 29
- Rating
- 4.5
P
Printablesgrappeq
Knurled M6 thumb screw
I needed some M6 thumbscrews and didn't like any of the existing designs so I created my own. It covers the top of a hexagonal M6 screw turning it into a thumb screw. Consists of 2 parts - the main body and a cover that is friction-fit at…
- Downloads
- 99
- Likes
- 14
- Rating
- 0
P
Printablesgrappeq
Single USB stick holder for IKEA Skadis
The part fits in very narrow spaces, allowing to make use of the remaining gaps in the layout of your crowded Skadis board😉The USB stick is tilted, making it easy to remove and allowing to stack multiple holders on top of one another.…
- Downloads
- 72
- Likes
- 8
- Rating
- 0
P
Printablesgrappeq
2.7 inch e-ink display + Raspberry Pi Zero case
A case for 2.7inch E-Ink display HAT and Raspberry Pi Zero. Has a hole at the back to guide the power cable through and some clips on the inside to ensure you don't damage the Pi when pulling by the cord too hard. I designed the case to…
- Downloads
- 57
- Likes
- 11
- Rating
- 5
P
Printablesgrappeq
Headphones holder with a vertical hook
Headphones holder designed to be hooked to a vertical plank (e.g. at the back of your desk). Fits perfectly on a plank that's 18mm thick. The holder was designed for my Steelseries Arctis 9 headphones but should work pretty well with…
- Downloads
- 56
- Likes
- 2
- Rating
- 0
P
Printablesgrappeq
E-cigarette liquid bottle rack
Has holes to store up to 6 bottles. 3 holes in the middle are slightly larger (22 mm) than the ones on the outside (21.5 mm). An easy and quick print.
- Downloads
- 53
- Likes
- 4
- Rating
- 0
P
Printablesgrappeq
SODIMM DDR3 model
A very basic model of SODIMM DDR3. Hopefully someone might find it useful. The model is 1mm thick - which is roughly the thickness of the RAM PCB. Keep in mind the actual RAM has chips on it, making it 2-4 mm.
- Downloads
- 53
- Likes
- 0
- Rating
- 0
P
Printablesgrappeq
USB C/microUSB/lightning adapter hook
Are you using a USB C to lightning adapter and worry you're going to loose it? Worry no more! This flexible hook will make sure it always stays with your cable 😊 Versions Several versions are included with for adapters with different…
- Downloads
- 48
- Likes
- 26
- Rating
- 5
P
Printablesgrappeq
Eibos Easydry Series X wall mount
Allows for mounting Eibos Easydry to a wall, leaving enough space for the air intake. I printed it using PETG, mounted with 5 countersunk screws to the cabinet wall and it seems to be very sturdy. My printing settings Material : PETG…
- Downloads
- 46
- Likes
- 3
- Rating
- 0
P
Printablesgrappeq
Arctic Liquid Freezer AIO tube guide
A simple part for holding the tubes from Arctic Liquid Freezer AIO in place so that you don't hang around loosely in you case. Also, looks nicer than zip ties! Designed for Arctic Liquid Freezer II 280mm and tested with that version of…
- Downloads
- 45
- Likes
- 4
- Rating
- 0
P
Printablesgrappeq
Velcro strip cable clip
Designed for 20mm-wide velcro strips. My printing settings Material : PETG Nozzle : 0.6mm Profile : 0.35 SPEED Supports : no Infill : 15%
- Downloads
- 42
- Likes
- 6
- Rating
- 0
P
Printablesgrappeq
Aviator wallet protective cover
Protects the surface of your Aviator wallet when unscrewing the coverplates
- Downloads
- 40
- Likes
- 3
- Rating
- 5
P
Printablesgrappeq
Drain filter/sieve
All the other designs had very small holes that weren't letting enough water through so I quickly designed something that fit my needs. Nothing fancy but prevents medium-sized objects from falling down the drain. Fits a 37mm drain but you…
- Downloads
- 30
- Likes
- 1
- Rating
- 0
P
Printablesgrappeq
Bedside box
A box that you can hang on your bed frame next to your mattress so that you can store some minor items while you sleep. It was designed for a bed with a frame that is 8cm thick but I used it successfully with another bed as well. The box…
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
Printablesgrappeq
Corner protector for a 20mm plank
A corner protector I designed for my son's bed. It should fit any 20mm-thick planks. Is hold via friction and doesn't require any screws or adhesives. Designed to be printed without supports using TPU. My printing settings Supports: NO…
- Downloads
- 29
- Likes
- 3
- Rating
- 5
P
Printablesgrappeq
IKEA JANSJO USB light holder
The light holder allows for attaching the IKEA JANSJO USB light to a surface using two 10mm printed screws. The screws should go through two 10mm holes in the surface and screw into the thread in the part. The design consists of 2 parts…
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
Printablesgrappeq
Screwless Acar X5 power strip desk mount
You need to print 2 mounts in order to hold 1 power strip. They slide into the small hooks the Acar X5 has on both sides. The models included were designed for desks with thickness of 34mm & 36mm. Printing I printed the models on my Prusa…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
Printablesgrappeq
IKEA NÄVLINGE lamp magnetic mount
A mount I designed to attach the Ikea Navlinge lamp to the side of my desk. I created 2 versions - with 4 or 2 20x5mm magnets. I ended up using 2x 2-magnet version as I found that setup to be more sturdy. Assembly Put some glue into the…
- Downloads
- 23
- Likes
- 5
- Rating
- 5
P
Printablesgrappeq
M8 screw cover/protector
Covers the end of an exposed M8 screw to protect kids (or adults) from bumping into them by accident. An M8 nut should be inserted mid print (as in the included 3mf BambuStudio file). The nuts I've used have an external diameter of…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
Printablesgrappeq
Coffee accessories wall-mounted organizer
A simple organizer to hold tamper, scoop and a brush for my coffee machine. Designed with my accessories in mind (De'Longhi DLSC058 tamper, IKEA ÄNGSBLÅVINGE scoop & some random brush). but should work with other similar ones as well.…
- Downloads
- 17
- Likes
- 6
- Rating
- 0
P
Printablesgrappeq
Baby roller that makes tapping sounds
My 10-months-old son really loves to play with things that roll so I've designed him a roller that makes tapping noises when moving. So far he seems to really enjoy it 😊 I've managed to drink a whole cup of coffee this morning while he…
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
Printablesgrappeq
P1S/P1P flat screen raiser
I've recently upgraded to P1S and found out that it won't fit in my 3d printer cabinet. To remedy this issue I've switched the default power cable to an angled one and designed this screen riser which allows for saving a couple precious…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
Printablesgrappeq
BabyDan ALMA gate hole cover pin
A pin to cover the holes on the side of the BabyDan ALMA gate.
- Downloads
- 7
- Likes
- 0
- Rating
- 0
These are all currently available results.