Counting matching models…
Here is an owl whose head can be rotated to face whatever direction you want. Thanks to @emmett , @BrOncO , and @cushwa for their designs. This is just a little rework of theirs and they deserve the most credit. Here is a little video…
I loved samuel's original design, but only had mason jars laying around so I remixed his with mason jar threads replacing the 4 prong type used by jelly/spaghetti jars. I also rotated the drain holes within the center of the juicer to…
Here is yet another means to spruce up that gift card. Here is a ribbon and bow that slides over your card to give it some flair. Print Settings Printer Brand: RepRap Printer: Ordbot Hadron Rafts: Doesn't Matter Supports: No Resolution:…
Here is a Darth Vader remix of the great open source action figure by Tony_D. I took a couple of parts from here and there and scaled appropriately and made work together. The Darth Vader head was scaled by ~80% front to back to make it…
Just a simple remix to go along with the Rock fad. Category: Sculptures
A simple funnel to screw onto the vent cap of large laundry detergent dispensers to allow for easier refilling from 5 gallon buckets. Category: Household
As with the original Desiccant Tumbler, print tumbler with 4 walls, 35% honeycomb infill, 0 top/bottom layers. The lid benefits from being pushed to 6 walls to make the crossbar solid. Attached 3mf is from Orca and has individual plates…
A modified version of donnyb99's great tensioner design. As some mentioned in the comments, the alignment of the pulley ends up raising the belt a little causing misalignment of the belt path and rubs against the v-slot aluminum…
A simple mashup of the canning jar lid and candy dispenser. I flipped the button over to be able to push it in to load candy into the hole of the slide and the spring returns slide to dispense the candy out the bottom. The predecessor's…
Here is a dual extrusion 8-Ball for marking your final shot in APA league play. Category: Sport & Outdoors
Slight remix to my original incorporating a Batman logo on the top. Category: Toys & Games
This is a remix of dalpek's Bat Signal to incorporate a small LED push button light in the end. I utilized the inner battery chamber of the motorcycle LED keychain flashlight to create the electronics section and swapped out the bat…
Add a small elephant head to your mason jar for the perfect succulent/small plants watering device.
This is an extremely simplified version of Circle Packing algorithm for filling the area of a circle with other circles. It by no means is anywhere near as complicated or accurate as real-world circle packing algorithms and I'm sure could…
Another drawer box variant that cuts slotted holes on the sides of the box where the drawers are. Have only tested the default settings for the box itself, have been having issues with layer separation when printed, any recommendations…
Here is a doubled up planetary gear bearing to hold a 24 mm diameter battery mod and 6 15 mm diameter tanks like the Kanger T3S. Overall diameter 100 mm x 40 mm tall. Created 2 100 mm diameter x 20 mm tall gear bearings (1 with gnu's…
This is a remix that replaces the sliding jaw with one that accommodates the placing of a billiard cue. Similar to a q claw but utilizes clamps instead of weight. There are two versions, a single cue clamp and a triple cue clamp. Both…
Here is a bobble head using Guy-Manuel's and Thomas's helmets as a replacement head to the original open source action figure (Medium). Embossed Daft Punk logo into the back of the torso (difficult to see in pictures). Haven't printed…
Quick remix of @sTranGeTag's pistol grip, aligning the one nut trap that was misaligned in the original. Other parts included here for convenience, but have been untouched. Note: Untested Print Settings Printer Brand: Creality Printer:…
Here is a remix of Lion4H's Radial Fan Fang to be able to mount to a 40mm x 40mm hot end fan instead of an E3D 30mm fan. Specifically designed to work on a Creality CR-10 with superpotatofudge's hot end cooling duct and the stock hot end…
My dad had a magnifying glass where the handle broke so I made this replacement one. I utilized the customizable handle below for the grip. Customized version of http://www.thingiverse.com/thing:46404 Created with Customizer!…
Created this remix to be able to stack droolops together to create a multiple color flower without dual extrusion. Print each in different colors and then insert one into the other with a dab of glue or ABS slurry to hold them together.…
A cup holder insert to hold your eLeaf iStick Pico so it doesn't jostle around while you're driving around. Category: Automotive
My version of the E3D Titan Extruder Clip for the Palette 2/Pro's output tube. I found xile6's version but did not like the Titan's bowden tube being the only support, so I made this version from MosaicResources' . Similar to xile6's…
Here is a small (66mm diameter) cup holder insert to keep your eLeaf iStick 30W mod and a couple of 510 threaded tanks in place. Category: Other
Here is a mash up of the Dwarfstruder and Raised J-head mount for use on the Ord Bot Hadron. It has been modified for using an E3D V6 hotend, so the slot for the head is thinner than the standard J-head. Designed for 3mm filament. Fins…
Modified the arm that sits on the front face for supporting heavier weight. Printed out pretty good and supports the weight of at least two 1KG spools no problems. Category: 3D Printer Accessories
This is a mash up of STIdeas' Badge Buddy and Zeppelinum's battery protector to have the best of both worlds. Update 9/1/2014: Added remixed protector to have equal flutes down the side. Zeppelinum's version had a wider flute opposite the…
A slightly modified version of clough42's version giving a little more support for both single wall and double wall thickness of the MakerFarm Prusa i3 and i3v. Completely redrawn in SketchUp, source files attached. Uses these sorbothane…
This is a mount that I created to attach the BLTouch probing sensor to my Ord Bot Hadron with Bulldog XL extruder and E3D V6 hot end. It attaches to the back side of the X-Carriage using M2.5 screws through the standard mounting holes on…
Updated version for the eLeaf iStick 40W TC Battery mod. Category: Automotive
Updated version of predecessor to accommodate for 608 bearing and incorporate a slot. Increased resolution of the cut outs to be round instead of hexagonal. Using the included nut thumbwheel allows for totally tool-less spool changes…
These are chain mounts for the Ord Bot Hadron by RepRapDiscount for use with rotoscan's cable chain. There is one on the nema motor that cradles the stand offs and another for the x-carriage that uses M4 bolts to mount to the existing…
Slight modification to my original design to accommodate the eLeaf iStick 60W TC mod. I shortened it a little from the original for faster print times. Added a single tank holder version as well. Update 11/17/2015: enlarged slot slightly…
Made some small changes to incorporate a smart lcd controller into the lid of the box. This resulted in a slightly longer box. Incorporated fan mounts for (2) 40MM fans. I have not yet printed this box entirely, but have printed some test…
This is a slight remix/mash up of two great designs for use on a helios heatbed with glass plate. Utilizes the 7mm version of the glass mount clip integrated with the gimbal mount from the foot of the Hadron WebCam Gimbal. Use that things…
A simple mount for Rambo board on the Ord Bot Hadron. Modified from original to orient mount holes to line up with the Hadron top plate. Category: 3D Printer Accessories
Here's a modified 40MM Fan Duct and Magnetic Mount for part cooling on an Ord Bot Hadron with Bulldog XL extruder and E3DV6 hot end. Of course this is very specific to my setup, but could possibly work with others. Screw the…
These are all currently available results.
