Counting matching models…
Lacrosse bookmark. I have included the .stl and g-code files. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2 Infill: 20 Filament brand: Any Filament color: Any Filament material: PLA
Updated wall mounted cell phone holder. The other I created fit a phone the size of a Samsung Galaxy Note 8. But that phone has since died and I needed a slightly wider version. So this is what I came up with for a quick remix. Original…
Volleyball bookmark. I have included the .stl and g-code file. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament brand: Any Filament color: Any Filament…
This is a cigar tube to hold one cigar for travel. I printed it on a small raft with a custom support between them because I printed the two pieces standing up and wanted as little wiggle as possible as the Z-height rose. I am not sure…
I needed a way to keep my phone off the dirty desk while working in my shop or exercising in my garage. This one hangs on the wall and should fit a variety of phones. I have included the g-code file, the .stl file and the fusion f3d file.…
This is a wheel cap for a Kawasaki Mule FXT-pro. I made if for a 2020, but it will fit many years. Kawasaki wanted $25 a piece, so I guess I outsmarted them. Made it out of black PLA+ at 100% infill. I turned it 90 deg in Cura so it sat…
I took the original Python AMS spool holder and adjusted the top and bottom parts to have a better angle for different spools. The ones I was finding that were created were for specific spool types. This one should fit multiple spools. I…
Just a simple multiboard bin to hold some stuff.
I modified an existing Roku remote holder to hand on my son's headboard. I included 3 files. One for a single color in Orca another of a 3 color model, also done in Orca. But you can use any of them in any slicer.
This is a 45 record center spacer. Nothing Fancy. Just playing with Fusion 360. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2 Infill: 10 Filament brand: Any Filament color: Any Filament…
This is a 2 piece box for Skip-Bo cards. Our old, cardboard box just wasn't cutting it anymore. I have included the .3mf from Fusion 360 of the top and bottom of the box, as well as the .3mf saved from Orca so you can just upload it and…
This is a face shield holder for safety shields, welding helmets, hats, etc. I used basic PLA. Total time on the X1C was just about 40min per part.
This is a soap dish and shampoo holder I made for our camper. I got tired of the sloped shelving and those sticky and suction cup things that don't work. The soap dish was done in 2 parts and super glued together so I could print it all…
Just a holder for Hueforge prints. It will work on a 200x200 print very easily. Prints in about 1.5hrs.
Small hourlgass shaped vase. Approx 55mm x 55mm. Good for small cuttings. Printed in Vase mode with Cura. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 0 Filament brand: Any…
These are all currently available results.
