Counting matching models…
I needed a cover for my new Holosun SCS-MOS sight on my Glock - and there was none to be found... This is designed for my Glock 21 Gen.5, so the slide might be wider than on your Glock. Print in an flexible material, I used TPU. There are…
Basic cat litter scoop for fine clumping litter. I use Catsan litter and this scoop is designed, in regards to the hole size, for this brand. The basic design is from the Cansan-branded litter scoops as well, they are just no longer…
Limiter for a Glock 17 Magazine to 10 Rounds. Allows for a little space to be able to insert the magazine with the slide closed. Use this instead of the inner plate. Pull the spring down completely until it snaps into place (there is a…
This is a cable holder for several meters of charging cable with a nice place for the plug in the middle. Kind of like for a garden hose. Prints without supports. The two "bars" in the plug area should hold it a bit better with friction -…
This is partially based on a design I saw - but can't find anymore... Cable clips for the 2020 extrusions, they fit the LDO extrusions, can't check other ones. Three versions: "Full" is just a complete clip. Clips directly in or can be…
I needed to clamp the buffer tube into the vise - so I made this helper. It's currently dimensioned for the mil spec buffer tube - but since the Fusion 360 file is included it can be changed easily. Print it with 4 or more perimeters and…
Replacement for the original safety flag. The slide must be almost closed before the pistol can be dry-fired. Also there is a open space so the ejector won't grab the safety flag's rim. The STL includes a bit of built-in support which…
Not tested yet! This thingy is supposed to protect the threads on the muzzle of my Haenel CR 308 - hence the outer dimensions. I intend to print this in PC Max. It should withstand a few shots, it just must not get too hot. For hunting…
You can unscrew the Hausken silencers with this tools. The small one has all the measurements taken from an original Hausken tool and was successfully tested on a JD224 caliber .30 silencer. The large one has not been tested yet but the…
This is a replacement for the bag-hooks you can place on the side of the trunk. Works just like the original, it'll attach onto the rail and lock against sliding sideways. I've printed it in PETG at 0.3mm height and 8 perimeters - so…
Update 2019-12-23: upon request another version for a 6-piece set with holes for drills measuring 4x35mm (2 pcs.), 5x40mm, 6x44mm, 8x50mm and 12x59mm. Untested yet. Use the files with "alternate" in the name. STEP file of this version is…
Replacement of the little thingy that keeps the spacer for the powder measure (if used with a small powder bar) in place. Fusion 360 file is included. Category: Sport & Outdoors
I really liked the design but the STL was a mess... ...so I recreated this completely in Fusion 360 from scratch. So nothing new, just a complete and intact STL. Category: Sport & Outdoors
I tend to lose the protective caps - so I needed something cheap and visible. I printed those in bright orange PETG - it helps... =^_^= The outwards facing holes are a bit bigger - I managed to completely hide the knot of the rubber…
Update 2018-12-05 I added a multicolor version I needed a new shopping cart coin... As you probably already guessed this is modelled after an AR-15's bolt carrier face. Not testes yet but the outside measurements should work fine. Print…
I wanted some protection for my Olight Prowess - and I wanted it to match the design of the flashlight. The logo was lasered in later on, it is not a part of the stl. It should friction fit the light, I printed it in simple PLA, no…
Hinweisschild Videoüberwachung mit optionalen Magneten. Vier Aussparungen für 5x25x1.5mm Magnete sind auf der Rückseite. Sign for video surveilance in German. Optional with magnets, there are four slots on the back for 5x25x1.5mm magnets.…
IPSC-Logo as multi-material print with three embedded 8mm x 3mm magnets on the backside. Fusion 360 file is included. The logo design is the intellectual property of the copyright and/or trademark holder. Category: Sport & Outdoors
I wanted to enlarge the forward assist button on my Haenel CR308, basically an AR-10, a bit. The button is used to silently close the action while hunting - by just pressing it with my thumb. The larger area works well in this regard.…
This thingy is supposed to hold the screw perpendicular to the surface of the wood until it has enough grip on its own. Currently this is designed with a fence to hit the middle of a 15mm thick board. It supports screws in the size of…
My try to create a recoil pad for the Ruger No.1. Has to be printed in a flexible filament, obviously… It fits my stock, it might not fit yours! Didn't work for me in the end, it was still too hard and I didn't want to buy and test other…
Remix of the design from fasteddy516, this time with the MK3 part as base. I liked the way jltx implemented the reset button so I used this as well. The Inlays for multi material are optional. The Fusion 360 file is included. Category: 3D…
This is a simple holder for a red filter I use on my flashlight. The original holder didn't survive a drop, just the filter did... Anyhow, this thingy fits snug on my Thrunite TN12 and Neutron 2C V2. The filter is not really held in…
Just a little container with screw-on top to hold some trail ribbon / marking ribbon. I use this while hunting to mark certain spots. One can tie something to the hole in the lid, I used a bit of Paracord and a small carabiner. The…
To add the final touch (of Bear...) The improved knob from Bogdanko is really the most functional knob I found so far - one can turn it really fast with the tip of a finger if need be. I've just added the paw impression to make it a nice…
This is intended as another problem solver for lazy greasers - a.k.a me. Sometimes a bearing is attached to other parts in a way that you can't get the normal grease top in - and my extended one will not fit as well since the tube won't…
Mounting bracket for a Kopp 9308 power extension. Print Settings Printer: Voron V2 Rafts: No **Supports:** No Resolution: 0.2 **Infill:** 20 Filament: Filament PM ASA Silver Category: Replacement Parts
This is a little cap for the Thrunite C2 Powerbank. It's designed to be printed in a flexible Material, preferably a dark one. My problem with the powerbank was the flashing LED. I use this while out hunting and in the evening/night this…
Case for EVNotiPi - the Standalone Version of EVNotify. It is used to monitor several battery and charging related parameters (SoC, SoH, charging speed...) and charging interruption of different BEV's (e.g. Hyundai Ioniq, Kona, Kia…
Remeshed as a low poly version, and as a low poly pen holder. Done in Blender and Fusion 360, Fusion file included. Probably best to cut off a small amount from the bottom (0.5mm) before slicing, just to get a better ground plane. Update:…
Just a simple diffusor to put onto an Olight i1R2 Pro lamp. Print it in something transparent, I used PETG.
I remixed the end caps to be a bit more fierce than the default gummy bears, matching the design of the LCD cover by fasteddy516. Multimaterial is optional - use the colored inlay if you like it. The Fusion 360 file is included. Category:…
2018-11-02 - Updated the files I've received my MMU2 kit and found the holders are a bit too long - the rubber feet of the spool holder were not touching down anymore, it was resting on my holder. I've reduced the lip that snaps the…
These are all currently available results.
