Counting matching models…
This is a so you can mount drives in a Zalman Z11 Plus in case you have lost the included parts. You will also need to purchase some #6-32 screws that are 3/8 inch long. You will need four of them per drive. It is recommended to print…
I modified the design by shaztech to support a custom SATA backplane. The backplane supports activity LEDs, fan connection, PWM fan input, Fan tach output, and drive hot-plug resistors. To use without the activity LEDs, print just the…
I modified the dumpster to be able to print with two extruders. I also added angles to the flame to make it look less boxy and use a little less filament. Corners were cut off of the base of the flame to try to account for slight sagging…
I wanted to make sure that the extension was airtight, so I modified it to have an inner lining made from flexible TPU. It requires a dual filament printer. Picture is after about 1 year of use. The TPU discolored, but stayed flexible.…
I have had the small part attached to the factory loop break. So I decided to reinforce it using a M5 bolt. You will need one M5x50 bolt, one M5 nylon lock nut, and two optional washers. Category: Automotive
This is designed to use 20mm suction cups. I engraved the slots for the suction cups to thin the acrylic for the head of the suction cups I used. Category: Automotive
I had problems with other designs either mounting to pipes, breaking after install, and/or not having a path for the coax. So I re-made this design in OpenSCAD, that way I am able to fix problems easier. Antenna Bracket:…
These are all currently available results.
