Counting matching models…
A generic hdd caddy for a 3.5" hard drive. The caddy uses 4 standartized pc case screws like https://www.aquatuning.co.uk/media/image/af/5b/d6/94577\_1\_600x600.jpg You can find a generic 5bay cage here:…
Wine glass holders (red/white). Should work on most wine glasses.
A generic 5 bay 3.5" hdd cage. Here is the 3.5" hdd caddy that goes with it: https://www.thingiverse.com/thing:4106276 I made a cage for the Thermaltake V21. I have not yet printed this exact model. However it works perfect for the…
Produces two different sizes of candles. Molds should be resizable to your need (however not tested): Small candle (80cm(h) x 40cm(d)): Material required: ca. 85 gr of wax, 14cm string (ca. d=1,8mm). Colors and scents are optional. Big…
This is a little redesign (removal of filament holder) of the already existing spool holder: https://www.thingiverse.com/thing:2744147 Print instructions Category: 3D Printer Accessories
A spool holder for their Prusa Ikea Lack Enclosure. With this spool holder you can easy & fast swap out spools or you can put on the filament directly on the holder. Print instructions Category: 3D Printer Accessories Print Settings…
The switch can be mounted under a table, on the wall or wherever you can fit 2 screws in it If you are looking for the same holder for the 8 port switch: https://www.thingiverse.com/thing:3278568 Print instructions Category: Computer…
Spacers for the commonly used Ikea Alex and Karlby desk setup. You can hold the spacers in place with 4x T25x25 screws.
I did not like the orignal hdd cage of this case. Also it offered only place for three 3.5" hard drives and it was hard to access the drives. As I am using this case as a server, I wanted quick access and place for 4x 3.5" harddrives. In…
Nozzle Box for E3D Nozzles for your Prusa Printer. Insert 6x M6 nuts in the middle part. Print instructions Category: 3D Printer Parts Summary Nozzle Box for E3D Nozzles for your Prusa Printer. Insert 6x M6 nuts in the middle part. Print…
This is a remix of the design https://www.thingiverse.com/thing:1322695 . For a smoother fit I made it 1mm bigger in the inside and added a honeycomb pattern to it. The switch can be mounted under a table, on the wall or wherever you can…
A DIY Bed table or for any other purpose. I attached two version. One version with struts for additional stability and the other without for easier printing. Print instructions Category: Household Supplies Print Settings Printer Brand:…
The same 3d model as https://www.printables.com/model/1453174-din-rail-bracket-58mm-heat-insert-screw-version
Stay cool during a hot day! This is DIY small personal office desk cooler. I needed a cooler for my office as my pc is heating the room very fast and I did not wanted to buy a big expensive A/C. My goals for this project were to model…
Extended version of https://www.thingiverse.com/thing:2641636 All credit goes to her! Print instructions Category: Containers
Raspberry Pi 3 PSU mount Parts used: PSU Mount: https://www.thingiverse.com/thing:2813146 Raspberry Pi case: https://www.thingiverse.com/thing:410003 Print the top of the case separately Print instructions Category: 3D Printer Accessories…
Can hold up to 3 rackets. I suggest printing in PETG with 1-2 additional perimeters. No supports. 0.3 layer height.
KVM Holder for the 2 Port Dual DisplayPort USB KVM Switch. You also need 4 screws. Print instructions Category: Computer Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: Yes Infill: 20
Teltonika RUTM30 DIN mount for following holder: https://www.printables.com/model/1453174-din-rail-bracket-58mm-heat-insert-screw-version
UPDATE I added a new model (front part) with a glass holder and some glasses as requested. Just glue the glasses to the model. No modifications to the back part. If you do not want to reprint the front part just glue the glasses to the…
M3 Insert version and screw version available. 58mm hole distance.
A DIY bed table for drinks of any kind. Print instructions Category: Household Supplies Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 10%
This is a simple spacer for your EKWB EK-XTOP Revo D5 Pump in three differents lengths (5mm,10mm, 15mm) Print instructions Category: Computer Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
Can hold up to 3 rackets. I suggest printing in PETG with 1-2 additional perimeters. No supports. 0.3 layer height. Squash holder: https://www.printables.com/model/219279-squash-racket-balls-wall-holder
I wanted to use only 1 fan for my mATX server build to be as quiet as possible. Therefore I wanted to mount the original 200mm fan above the motherboard in addition with the Alpine AM4 Passive cooler (…
Create tasty and awesome looking appetizers. You can either toast the bread before stacking them up or leave it like they are. Create sweet, salty or whatever you like type of snacks. They are plenty of recipes online. Enjoy! What you…
Easy to print door handles for the IKEA Hasvik wardrobe. Should also work for other wardrobes. Print instructions Category: Office Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0.2…
An unverisal PSU mount for whatever you'd like to mount on your Prusa i3 mk3 (camera, raspberry, etc..). You dont need anything. You can simply reuse the screws that are pre-installed on the top of your PSU. This mount is compatible with…
A generic filament rack made with 3d-printed parts and round wood. Wood poles have a diameter of 30mm (+- 1-2mm). When done printing, you need a rounded file to correct the holes of the 3d printed parts so they fit better with the wood.…
SSD Cover for you thermaltake pc case to hide the ssd in a nice little cover. First self made 3d item, so be nice to me please :) Print instructions Category: 3D Printing
A table or other general purpose satechi usb c adapter holder. The holder works fine with the following adapter: https://satechi.net/collections/usb-type-c/products/slim-aluminum-type-c-multi-port-adapter-v2?variant=12604200812632 However…
Airline rail end cap with M3x12mm screw to secure Print with supports on build plate only.
On each end there is space for double sided tape to hold it in position Print instructions Category: Computer Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No
A nice little cover for you SFX-PSU in your Phanteks Evolv Shift X Case. Do not forget to put the screws back from the old cover and mount the rubber thing. I did not liked the default one (image5) as it leaves a big gap. Print…
A honeycomb pump holder for your Swifttech Maelström pump. You need to mount the original pump holders in the inversed direction. You also need some slightly bigger screws. Print instructions Category: Computer Print Settings Printer…
You will need: 2x countersunk head screw M4x10 to attach the PoE Adapter to the plate 2x threaded inserts M4 2x screws to attach the holder to a wall or something Best to print in PETG, 0.2 and supports on built plate only
Replaces the original front panel of the NCASE M1 with a custom water reservoir. With this front panel reservoir, custom water loops inside the case should be made a lot easier. Also filling and draining is a lot easier with a reservoir…
A custom nameplate for your case. All you need is some superglue and two little magnets (max diameter 10mm) Print instructions Category: Computer Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Infill: does not…
I little fan controller for your Phanteks Evo Shift Case X. You'll need 2 M3 nuts and bolts to attach the mount. Afterwards use some double-tap to mount your controller onto it. The holder is designed to be mounted behind a radiator.…
Sturdy heat insert version mount for Tuya Outdoor Temperature IP65 Sensor: https://de.aliexpress.com/item/1005009523268649.html?spm=a2g0o.order_list.order_list_main.70.5ebc1802CSOB1u&gatewayAdapt=glo2deu If in direct sun exposure I…
These are all currently available results.
