Counting matching models…
A junction box for the reolink CX410 with the BX10 mount to safely store the Keystone module and the connector cable. Printed in ASA (UV resistence) with 2 walls and 20% infill. The seals (if needed) are printed in TPU. The lid seal might…
A holder for the battery of the Fein 12V drill series, angled for ease of use. Print settings: print standing (as shown in the image), no support no brim 2 walls, 15% infill is plenty enough Printed in ABS, but PLA would work also. Use a…
A dusthood tailored for the Teknomotor 1.1kW COM31400414 spindle, allowing unimpeded airflow from the fan to prevent spindle overheating while ensuring effective extraction. Two 80mm hoses need to be connected and secured using hose…
The original circuit box for the Tenkomotor 1.1kW spindle COM31400414 can be challenging to wire and could potentially result in cable damage or loose connections, especially if not regularly handled. Exploring its compatibility with…
It takes 2 80mm hoses for maximum dust extraction with a high volume dust extraction like a Felder AF160. Its mounted to the spindle holder of Sorotec and fits nicely on the Sorotec Basic Line Z Axis. The dusthood is printed in 4 parts,…
A hose holder/guidance for 2 80mm dust hoses for the dusthood i designed. It fits nicely on the sorotec basic line z axis and is mounted with 2 M5x25mm screws into the sliding block (they package more than you need, so you should have one…
These are all currently available results.
