Counting matching models…
I created this case for a Pi 4 (with POE HAT), a 2.5' Hard Drive and a SATA to USB adapter. There is a slot on the IO side of the case that can be used to store the excess cable for the SATA to USB adapter which makes this case slightly…
Please note that I am still waiting for my R36S to arrive. This should fit the console because I didn't change any of the internal dimensions from the original model. Print the grip upside down with support and bed adhesion. I printed…
For more info about this project, please have a look at my blog post .
Privacy focused "smart" doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. For more info about this project, please have a look at my blog post .
This is designed to be a 1u enclosure for a Raspberry Pi 3/3B+/4 and two 2.5' HDD's or SSD's. For more info, please check out my blog post about this project .
This design allows you to mount a Raspberry Pi V1/V2 camera with a Neopixel LED strip to your Creality Ender 3 v2 Neo printer. For more info, please check out my article about this project .
Backups are important but if you're like me, they often get forgotten about. This enclosure lets you easily package 2 x 5tb drives to and a Raspberry Pi for file storage. For more info about this project, please have a look at my blog…
This shroud is inspired by a few shrouds on Thingiverse. Since the fans on Ender 3 v2 Neo's run on 24v, I wanted something that would let me use a Sunon MF80252V11000UA99 to provide more airflow to the stepper controllers on the…
I have remixed this design to include four holes that align with the holes in the mounting bracket for the Ubiquiti Unifi AC LR access point but it should fit most Unifi AC generation access points. For more info, please see to my article…
I modified the original model to increase the size so it would accommodate larger zigbee temperature and humidity sensors like the ones from Tuya and Sonoff. I have also added a column off the back of it that includes a mounting hole so…
This was a fun project. I remixed the original design to include a power button for the Pi, a 0.91' OLED display and use M2.5/M3 screws and brass insert nuts to hold everything together. I'm going to use this as an OpenWRT based travel…
I remixed this design to address three issues: It wasn't big enough for DDR4 laptop memory The lid was 2.1mm off the surface which made it harder to print The lid was too small so it was impossible to get it off Hope this helps!
Last year (2023) was Home Assistant's Year of the Voice so I thought there'd be no better way to start 2024 than by building my own Home Assistant powered smart speaker. For more info about this project, please have a look at my blog post .
I designed this Raspberry Pi NAS to connect two 3.5' HDD's to a Pi 3B+. There is a DC buck converter for the Pi so you don't need to have a separate 5v power supply. For more info, please check out my blog post about this project .
Raspberry Pi 5 case with a 40mm fan and optional oled display.
An ESP8266/Wemos D1 mini based air quality monitor. Please note that this should never be used to replace a proper CO monitor and should be used for informational purposes only. For more info, please check out my blog post about this…
I remixed is because the original design didn't have enough width for the cables to exit the PSU compartment. The original power supply cover for the Ender 3 v2 (and v2 neo) restricts the airflow to the power supply so the fan ramps up to…
A remix inspired by this design . Designed to work with Nikon EN-EL14/EN-EL14A batteries and SD cards.
This model allows you to use a Light Dependent Resistor (LDR) and an ESP8266 based dev board to track your households electricity usage by counting the number of times the LED flashes on your smart meter. Most smart meters flash an LED…
I designed this simple bench PSU to have one variable DC output and 2 x USB A ports. It is based on a 19v 65w Dell laptop power supply that I had lying around but I wouldn't recommend this route to others. If I were to design it again,…
Check out my blog post for more information. Assembly guide: Once printed, you'll need to insert 2 x M2.5 brass threaded inserts into each of the standoffs in the lid - one should be installed from the bottom and one from the top. Be…
These are all currently available results.
