Counting matching models…
Specs: 11 Micro SD card slots 1 SD card or adapter slot Uses 8 6x2mm or 6x3mm Magnets 100 x 70 x 11mm dimensions Included STEP file for easy editing Some people have been concerned that the magnets have an ill effect on the memory cards,…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
This is not an official model and is probably not super accurate either This is a model of the popular Stratocaster electric guitar made for a school project. Onshape Document:…
Here is a Gridfinity baseplate designed to save filament and magnets. It still uses the default 6x2mm magnets in the same positions and is compatible with other gridfinity bins and models. There is an included STEP file so you can make it…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. This longer one works great for screws or hot glue sticks. There are optional magnet holes with…
This is a simple mount to attach the KUSBA USB accelerometer to a 3d printer bed up to 7 mm thick. All you need is a few M3 screws and one nut. Check out my universal hot-end mount
The stuff you need to know: Magnet holes are 6.2mm in diameter STEP file is included for editing Holds two 68mm diameter by 19mm rolls Print Settings: Supports: none Brim: optional Infill: 15% Perimeters: 2 Material: any Check out my…
I've added a hole on the head to use this as a keychain. Remix of Airwaves Ted Flexi Articulated Dolphin 1 .
This is a simple mount to attach the KUSBA Usb accelerometer to almost any 3d printer. All you need is a few M3 screws. Please note that this is only used to run input shaping and then should be taken off so that your heatsink gets proper…
For my recent build of The 100 , I wanted some small leveling knobs, so I made these with a knurled pattern for grip and aesthetics. They have a diameter of 25mm and have a hole for a 4.6mm outer diameter M3 threaded insert. These will…
Uses the default 6x2mm magnets (optional) Use a sharpie to make the numbers easier to see Included step file for modification such as resizing magnet holes No supports Required
No supports required STEP file included to adjust magnet hole sizes or nozzle labels
Uses the Vslot extrusions to attach to the bottom of the printer. It also utilizes the stock rubber feet for grip and vibration reduction. The version I have printed and tested is the 40mm version. I would recommend printing only one to…
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
A simple model to hold a "Bic Round Stic" pen onto the Ender 3 V2. The fit is pretty tight so I used a rubber mallet to get the pen piece to fit in the hole. You will need two m3 screws, probably 8-12 mm. Print Settings: Rafts: Doesn't…
I wanted to mount my phone to my amazon basics tripod using the quick-release plate. So I created this model. The holder can extend from about 60 to 100mm, worked with my iPhone 13 with case and iPhone 7. Hardware Needed: 1 M3 threaded…
Included STEP file for making it larger or adjusting the magnet holes. Uses 6x2mm magnets (same as other gridfinity) and is compatible with all gridfinity models. I've Used this on my ender 3 pro and also v2.
Here's the CAD I used to create my The 100 . I tried to repurpose a lot of an Ender 3 V2, including the bed, mainboard, and steppers. Because of this, I had to make some changes to the design to suit my needs. I hope that other people in…
The default diameter of the hole is 29.5mm, but a STEP file has been included for ease of modification The VSlot Gridfinity baseplate shown in the photos can be found here:…
I wanted the reuse my ender 3 steppers to build The 100 , so I attempted to remove the press-fit pulleys with a few printed models, shear force, and heat. None of that got the pulleys to even budge. That's what brought me to create this…
This is a drop-in replacement to mount an Ender 3 board or a BTT SKR MINI E3 V3. All you need is a couple of m3 nuts and some screws. Print Settings: Supports: None Infill: 15% Perimeters: 2 Material: Any Fan Holder for the motherboard:…
A super long bridging test
I've pre-oriented the parts for their optimal orientation without supports. KUSBA mounts at the top where the threaded inserts are with 2 m3 screws. Uses the same bottom if you already have that printed Use the default The 100 print…
I'm trying to repurpose as many parts from my Ender 3 V2 to build The 100 . One of the parts is the power supply. I created this plug mount to mount the stock plug that comes with the Ender 3 V2 to the back of the printer by modifying one…
No supports required Uses an m3x20mm screw and an m3 nut to clamp on the tripod tightly
Airtag cases are hard to get the tolerances right for every printer, this worked for me but might not work for everyone. No supports required
There are pegs for the microswitch to sit on, but I found them to be a little delicate so I just added some glue to the switch. Use m3x45mm screws to replace the existing 40mm countersunk ones. STEP file included Supports necessary Gcode…
I don't know if I did something wrong but the first two plates I printed didn't really work, I ended up drilling holes and filing to get things to work better so I just created this. I also modified it to use the hardware I had better…
These are all currently available results.
