Counting matching models…
A thread test block for normal Metric threads. You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. The v2 version uses a thicker marking to be more printable.
A thread test block for coarse imperial threads (UNC). You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. I've also made a Metric version for this model:…
A simple thread gauge for metric threads, designed to check bolts from sizes M3 to M14. The bolt diameter can be verified using the corresponding holes, and the thread pitch can be checked along the disc’s edges. Material and print time…
A keychain with japanese Honda text.
Testbolts with metric thread. The key is designed to be compatible with all of the bolts, it uses an internal-, and and external 10mm HEX. The set is designed for the Metric thread testblock:…
Thread comb for gauging metric threads. I made the models for thread pitch from 0.5mm to 6.0mm, but printing under 1.0mm pitch might have some issues, depending on the nozzle diameter.
3d printed barend for BMX. I tested it with PLA, but a stronger material might be needed.
It's a repair plate for the often cracked climate consol. You can glue this plate on the consoles front and it's done. Category: Automotive
I've had a custom aftermarket switch that doesn't work anymore, so I designed a delete panel for it. The original panel has got a metal clip or spring on its back. I designed this Thing to reuse it, so this model needs it too. Category:…
A 20x20x20mm test cube with chamfered edges for printer calibration. Tested on both FDM and SLA printer.
Simple housing for DC voltage meters. The compatible voltage meter is shown in the pictures.
A measurement gauge to check the module of a spur gear. I used metric modules and 20° pressure angle. I've made multiple module sizes, but if you need extra modules or in another pressure angle, just let me know and I upload it ASAP.…
Cable insulator making device for soldered wires. Just simply place the wire in the groove that best fits the cable (1.5, 3, and 5mm in diameter), close the top of the tool and fill the cavity with hot glue, or silicone. The .stl file is…
Windshield washer tank caps in multiple sizes. The …mm in the name of the .stl files are showing the internal diameter of the caps.
These are all currently available results.
