P
PrintablesFalkOnP
Single Oral B Stand
Single Oral B Stand No supports and no errors in Prusa Slicer! Size: X66mm Y66mm Z18mm
- Downloads
- 774
- Likes
- 58
- Rating
- 5
All models
Counting matching models…
P
PrintablesFalkOnP
Ender3 S1 Ribbon Cable "Snap" Pack
Creality Ender 3 S1 Ribbon Cable Support Pack Fits E3S1Pro and should fit Plus and Regular version of E3S1 series as well. My personal set have been going strong for over 6 months, with zero issues! No extra hardware is required! Most of…
- Downloads
- 460
- Likes
- 61
- Rating
- 4.57
P
PrintablesFalkOnP
Bug-A-Salt Muzzle
Bug-A-Salt Muzzle M4 style “Flash Hider” Drop in replacement! Optimized for 3d printing standing up. My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25% Filament: NX2 PLA “PLA+” No supports
- Downloads
- 271
- Likes
- 37
- Rating
- 5
P
PrintablesFalkOnP
Ender 3 S1 Cable Holder
Ender 3 S1 Extruder Cable Holder with Clip No issues during normal printing and ABL Needs supports No errors in Prusa Slicer! Let's see some makes and likes! =) Check out the Ribbon Cable Snap Pack here:…
- Downloads
- 220
- Likes
- 27
- Rating
- 4
P
PrintablesFalkOnP
TM MWS Buffer Spacers
Airsoft TM MWS Buffer Spring Spacers Prevent overtravel damage from the bolt. Size: 24 x 24mm In: 1mm, 2mm, 4mm, 6mm, and 8mm I personally went for one 2mm spacer for my DE MWS. My print settings: Layer Height: 0,2 Perimeters: 3 Solid…
- Downloads
- 177
- Likes
- 9
- Rating
- 0
P
PrintablesFalkOnP
Crosman 1077 Reload Tray
Crosman 1077 Reloading station Fits two magazines “Clips” Storage for 1077 Clips Tool https://www.printables.com/model/527527-crosman-1077-clips-tool Dimensions: X 66mm Y 55mm Z 10mm My print settings: Layer Height: 0,2 Perimeters: 3…
- Downloads
- 168
- Likes
- 14
- Rating
- 0
P
PrintablesFalkOnP
Ender 3 S1 Pro screen cover
Added flat handles to top and bottom Nice work @ 67GTA
- Downloads
- 145
- Likes
- 23
- Rating
- 4
P
PrintablesFalkOnP
Small PEI Bed Hex Scraper
Hex Inspred PEI Bed Scraper. Length: 11cm, Handle width: 2 cm, Height: 4mm and Scraper width: 4cm Created in Blender Checked in Prusa Slicer My print settings: Layer Height: 0.16 Perimeters: 3 Solid Layers: 3 Infill: 20% Filament: NX2 PLA…
- Downloads
- 107
- Likes
- 2
- Rating
- 0
P
PrintablesFalkOnP
Crosman 1077 Barrel Stabilizer
Crosman 1077 Barrel Stabilizer Fits Powermaster 66 as well Might fit other Crosman models? 1077 inner barrel outer diameter 7,93mm "5/16" 0,3125 inch Item Dimensions: X 14.1mm Y 14.1mm Z 30mm Use Silicone grease on the contact area with…
- Downloads
- 106
- Likes
- 7
- Rating
- 5
P
PrintablesFalkOnP
Volvo 69800 Fuel Pump Socket
Volvo 69800 Fuel Pump Socket Volvo V70, S60, S80, XC70 and XC90 Print at 100% infill and you might get lucky, use at your own risk Use at least 5 perimeters/walls Mine failed at the 1/2 socket attachment, but no damage to either the tools…
- Downloads
- 106
- Likes
- 2
- Rating
- 0
P
PrintablesFalkOnP
Mouse Bungee
Mouse Bungee. Optional: Hollow version For Adding/Removing Weight, I used steel balls and silicone. Add “100% Silicone grease” to the threads for a smoother operation. Add Velcro to the bottom for noise reducing or for more attachment…
- Downloads
- 106
- Likes
- 11
- Rating
- 5
P
PrintablesFalkOnP
Crosman 1077 Clips Tool
Crosman 1077 Clips Tool, Seating pellets flush Ejecting stuck/bad pellets Crosman 1077 Reload Tray https://www.printables.com/model/535789-crosman-1077-reload-tray My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill:…
- Downloads
- 100
- Likes
- 3
- Rating
- 0
P
PrintablesFalkOnP
TM MWS Trigger Guard
Airsoft TM MWS Spec Trigger Guard Reuse the original hardware: Spring, pins and grub screw. Improves ergonomics but loses the drop down function. My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25% Filament: NX2…
- Downloads
- 84
- Likes
- 7
- Rating
- 0
P
PrintablesFalkOnP
Hub Cap Enzo
Made in Blender 60x60x11 mm Checked in Prusa Slicer, should work? Not final, I will improve on this design once my 3d skills have increased
- Downloads
- 82
- Likes
- 9
- Rating
- 0
P
PrintablesFalkOnP
Sprite Printable Fan Cover/Mount
Sprite Printable Fan Cover, for a personal touch Version 1 Made it printable, no supports and no errors in Prusa Slicer! Further improvements might be in place, time will tell. Let's see some makes, likes, remixes and feedback! =)
- Downloads
- 76
- Likes
- 10
- Rating
- 0
P
PrintablesFalkOnP
1077 Buttstock Spacers
1077 Buttstock Spacers 10mm My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25% Filament: NX2 PLA “PLA+” No supports Troubleshooting: Measure twice, print once ;-) Remember: Not all printers print the same!
- Downloads
- 67
- Likes
- 2
- Rating
- 0
P
PrintablesFalkOnP
Quadrunner Throttle Lever
Suzuki Quadrunner Thumb Throttle Lever Fits: LTF250 88 and 89 Main drive behind the design: Needed a plastic thumb lever for cold weather use. It's an ongoing project, might upload my “improved” version if there is any interest. No errors…
- Downloads
- 59
- Likes
- 9
- Rating
- 0
P
PrintablesFalkOnP
1077 Butt Plate
Plain Simple 1077 Butt Plate My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25% Filament: NX2 PLA “PLA+” No supports Troubleshooting: Measure twice, print once ;-) Remember: Not all printers print the same!
- Downloads
- 50
- Likes
- 1
- Rating
- 0
P
PrintablesFalkOnP
Crosman Front Sight Remover
Crosman Front Sight Remover Tool With this tool the front sight can be reused and takes no damage during the removal process. Use light taps with a hammer on this tool. Use tape to keep it in place with the sight. One hand on the Air…
- Downloads
- 45
- Likes
- 5
- Rating
- 5
P
PrintablesFalkOnP
Prolapse Spoon Sheep
A working prolapse spoon for sheep. Might work with goats. Tested and lasted over a month in use with annealed PLA+ "Extrudr NXT2" After print sand it down with fine sand paper and clean well! Educate your self before use! Scale: X 182 MM…
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesFalkOnP
ESEE Candiru knife scales
For M3 bolts to thread directly into the plastic. As I currently do not own threaded heat inserts. Huge thanks to the original creator for making this sweet design!
- Downloads
- 31
- Likes
- 6
- Rating
- 0
P
PrintablesFalkOnP
Ender 3 S1 Light Bar Cable Cover
Issues with fitting? Use a file or reprint at another desired scale. Remember not all printers print the same.
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
PrintablesFalkOnP
CO2 12g Wall Mount
CO2 Wall Mount. I ended up using a Dremel style tool and sandpaper for a better fit for my needs. Screws used: 4,0 x 20mm Thanks to the original designer! My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25%…
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
PrintablesFalkOnP
AL-KO Fuel Knob
AL-KO Fuel shut off Knob Part: Loncin “173260001-0002” An interference fit, also known as a press fit or friction fit design. My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25% Filament: NX2 PLA “PLA+” No…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesFalkOnP
Magicshine Tool
Magicshine Tool My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25% Filament: NX2 PLA “PLA+” No supports Troubleshooting: Measure twice, print once ;-) Remember: Not all printers print the same!
- Downloads
- 7
- Likes
- 0
- Rating
- 0
These are all currently available results.