P
PrintablesStefan
Dicey dice tower
Print it and throw the dice. Swap a new color filamant as soon as the floor is done. I added a modified version of the dice from there:…
- Downloads
- 891
- Likes
- 165
- Rating
- 5
All models
Counting matching models…
P
PrintablesStefan
Spool Roller
I often don't use my 3d printer for a while and did not want to keep packing away filament between uses. The pre-made versions of this seemed more expensive than I though was necessary so I made this. This is a filament roller which fits…
- Downloads
- 579
- Likes
- 112
- Rating
- 4.38
P
PrintablesStefan
OpenSCAD fidget cube
A remix of https://www.thingiverse.com/thing:1269699 (Kobayashi Fidget Cube). I wanted an Openscad version where I could add images easily. The initial idea was that my daughter would draw some images which I could convert to svg. Until…
- Downloads
- 562
- Likes
- 74
- Rating
- 5
P
PrintablesStefan
Print-in-place Cable Winder
Print in place cable holder. Put cable through & wind up. Pull each side gently to unwind. This should print well enough without supports. Version 06 should fix problems if the print ends up fuse. The space between the two parts is 0.6mm…
- Downloads
- 493
- Likes
- 64
- Rating
- 5
P
PrintablesStefan
Quirky pencil holder
I wanted a pencil holder & this is the unfortunate result. It might even be useful.
- Downloads
- 490
- Likes
- 63
- Rating
- 4.75
P
PrintablesStefan
Bio-hazard soap holder
Thought I would trying out intersections. Print instructions Category: Math Art Summary Thought I would try out intersections. Print Settings Printer: Dremel 3d40 Supports: Yes Resolution: 0.2 Filament: Dremel PLA Notes: It may be better…
- Downloads
- 469
- Likes
- 58
- Rating
- 5
P
PrintablesStefan
Checklist (print in place version)
Print in place checklist. The OpenSCAD code can easily be changed for customized list, just adjust size and spacing. This is based on https://www.thingiverse.com/thing:2068177.
- Downloads
- 349
- Likes
- 109
- Rating
- 4.67
P
PrintablesStefan
Fractal pyramid / tetrahedron
There are a variety of these available already but I wanted something that could easily be modified. This will print with “addinvert=false;” but only if bridging works very well. I managed to print this without supports on a Prusa Mini.
- Downloads
- 271
- Likes
- 33
- Rating
- 0
P
PrintablesStefan
Chainmail
My attempt at chain mail. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.175 Infill: 80-100 Filament: Hatchbox PLA Yellow Notes: Good initial layer adhesion is essential. I used a heated…
- Downloads
- 239
- Likes
- 22
- Rating
- 5
P
PrintablesStefan
Rotating egg thing
Christmas ornaments for the family. It seemed like a good idea at the time. Anyway, I also wanted to try making a less tortures version of Maker Muse's torture test . Print instructions Category: Math Art Summary Christmas ornaments for…
- Downloads
- 231
- Likes
- 58
- Rating
- 5
P
PrintablesStefan
Catapult (M&M dispenser)
OpenSCAD version of (yet another) catapult. Should print in place without supports.
- Downloads
- 188
- Likes
- 15
- Rating
- 5
P
PrintablesStefan
Glove/sock dryer ver 2
Over floor vent dryer ver 2 My original dryer was not large enough to be useful for anything except small gloves/socks. Printing this in two parts allows for much longer attachments & the attachments can be rotated on the base for better…
- Downloads
- 176
- Likes
- 52
- Rating
- 5
P
PrintablesStefan
Bracelet for hieroglyphic messages
My attempt at a bracelet. Thought the kids would like to use it for a Halloween themed bracelet. No luck. Next option was adding Egyptian hieroglyphics for lack of better ideas. Alter the array "word" (line 6) to spell out an obscure…
- Downloads
- 166
- Likes
- 26
- Rating
- 4
P
PrintablesStefan
OpenSCAD Sphericon
Attach the two halves, mind the rotation. This can print without support but some combinations may have small defects at overhangs.
- Downloads
- 166
- Likes
- 17
- Rating
- 5
P
PrintablesStefan
Twisty toy
Twisty fidget toy. This is difficult to print since it is print-in-place. Use at least 3-4 perimeters. The parts must be carefully loosened. I wasted some amount of filament getting the correct balance between clearance and internal…
- Downloads
- 157
- Likes
- 27
- Rating
- 5
P
PrintablesStefan
Wig rack
My daughter needed a rack for wigs. It would probably have been better to just buy one... Print instructions Category: Accessories Summary My daughter needed a rack for wigs. It would probably have been better to just buy one... Print…
- Downloads
- 152
- Likes
- 19
- Rating
- 5
P
PrintablesStefan
Concept 2 rower cellphone mount
Cellphone bracket for a Concept 2 rower
- Downloads
- 144
- Likes
- 19
- Rating
- 5
P
PrintablesStefan
Eisenscript tree
Doodling with eisenscript. Printed with Prusa Mini. I scaled this up to the maximum printable size.
- Downloads
- 115
- Likes
- 17
- Rating
- 5
P
PrintablesStefan
Earth heightmap
My attempt at height mapping on a sphere. This uses a tetrahedron or icosahedron as base which is recursively mapped to a sphere. This does take some amount of memory & time for nriter>=5. If anyone is interested in making their own…
- Downloads
- 106
- Likes
- 9
- Rating
- 0
P
PrintablesStefan
Cylindrical Slide Rule - remix
Remix of "Cylindrical Slide Rule -by M_D_K March 08, 2022" from Thingiverse. I modified this to be a print-in-place model.
- Downloads
- 105
- Likes
- 9
- Rating
- 0
P
PrintablesStefan
Articulate
OpenSCAD function to articulate any extruded 2d art. I have added a few examples incl. a bat, fish, shark & dragon. I found (aka plagiarized, sorry) the dragon clip art somewhere on the internet. Just adjust the position & angle and…
- Downloads
- 98
- Likes
- 7
- Rating
- 0
P
PrintablesStefan
Fractal pyramid
This was inspired by octahedron fractal IFS thing v1 and 2 . This was made with Structure Synth. Remove '//' in the 'Main' section for some variations. Print instructions Unassociated tags: Structure Synth Category: Math Art Summary This…
- Downloads
- 95
- Likes
- 24
- Rating
- 0
P
PrintablesStefan
Desktop rubbish bin
Bin for small bits of rubbish and PLA extras from 3d printing so that the cat can't eat it. I added two 24x3mm magnets during the print (one for the lid and one for the bin) to keep the lid closed. I used KR Menagerie* & Petroglyphs…
- Downloads
- 95
- Likes
- 8
- Rating
- 0
P
PrintablesStefan
Grommet for filament drying box
This is primarily a grommet for filament spool containers. It may also be useful to attach an O2 supply for N95 masks. (Edit: updated with a better tapered design)
- Downloads
- 93
- Likes
- 14
- Rating
- 5
P
PrintablesStefan
Yet another fractal tetrahedron
I wanted to see if I could do a recursive fractal in OpenSCAD. Several misprints later I decided that clever people use polyhedrons. On the the other hand, I just use 'hull'. With enough memory it will render eventually. Print…
- Downloads
- 88
- Likes
- 7
- Rating
- 0
P
PrintablesStefan
Eisenscript bowl
Just playing around with eisenscript ( https://github.com/after12am/eisenscript ). This can also be generated with MeshLab. (Filter→Create Mesh Layer→Structure Synth)
- Downloads
- 87
- Likes
- 18
- Rating
- 0
P
PrintablesStefan
Glove/sock dryer
Thought it is time to make something marginally useful with the printer. The idea is to place this over a vent in the floor to dry socks/gloves. I had to scale this down to fit into the printable area of my printer & as such it is barely…
- Downloads
- 84
- Likes
- 12
- Rating
- 0
P
PrintablesStefan
Synth Bowl
Structure Synth I rediscovered Structure Synth . This can be installed under Ubuntu & Debian as the 'structure-synth' package. As usual I have plagiarized a few sites to put this code together. Useful links: Tutorial DeviantArt tutorial…
- Downloads
- 76
- Likes
- 9
- Rating
- 1
P
PrintablesStefan
Springo Pumpkin Skull
I wanted to see if I could make a springo pumpkin & then decided to add a skull for variety. This model is made for a layer height of 0.2mm. LH is set at 0.3mm to create the defects. It does require using a knife to free up the layers…
- Downloads
- 67
- Likes
- 15
- Rating
- 0
P
PrintablesStefan
Torus bowl
Yet another bowl. This works well for 3d printer tools. (The “torus_bowl.07x.stl” is an experiment and not for printing. It may be semi printable if it is turned upside down with a brim.)
- Downloads
- 63
- Likes
- 12
- Rating
- 0
P
PrintablesStefan
Wall mount
This is a wall mounting for a HTC Vive base station or a camera. It is designed to be used with these screws: "1/4-20 X 1/2" THRU 2" STAINLESS FLAT SOCKET HEAD CAP SCREW BOLT".
- Downloads
- 60
- Likes
- 6
- Rating
- 0
P
PrintablesStefan
Polar vase
I thought this would be a nice way to demonstrate polar graphs to my kids. Desmos makes graphing polar coordinates ridiculously easy. Add a variable that creates a nice 3d printable transition Make a nice graph. Then add a variable (ie…
- Downloads
- 58
- Likes
- 8
- Rating
- 5
P
PrintablesStefan
Cellphone Stand
I needed a cellphone stand to use the phone with a bore scope or Butterfly iQ.
- Downloads
- 53
- Likes
- 5
- Rating
- 0
P
PrintablesStefan
Lsystem extrusion
Select “test” to test a set of instructions. “square” selects square base shape, “tri” selects triangle base shape & “base” use base_rule to construct the starting shape.
- Downloads
- 52
- Likes
- 11
- Rating
- 5
P
PrintablesStefan
Fractal diamond thing
Some more fun with Eisenscript / Structure Synth. The diamond shape works well for printing without supports. Print instructions Category: Math Art Summary Some more fun with Eisenscript / Structure Synth. The diamond shape works well for…
- Downloads
- 49
- Likes
- 11
- Rating
- 0
P
PrintablesStefan
Blocky glass
Another Structure Synth object. Might even be useful as a candle holder as long as the PLA doesn't catch fire. Print instructions Category: Math Art Summary Another Structure Synth object. Might even be useful as a candle holder as long…
- Downloads
- 48
- Likes
- 5
- Rating
- 0
P
PrintablesStefan
Projection map of hexagons
This is a modification of: "Stereographic Projection using CSG" by Marcio Teixeira. Note: change the $fn=6 in the extrude module for different polygons. Print instructions Category: Math Art Summary This is a modification of:…
- Downloads
- 47
- Likes
- 5
- Rating
- 0
P
PrintablesStefan
Cellphone puck
Yet another cellphone holder. I saw something like this on an add and wanted something I could customize. The moto version is for cellphones with a width of ~ 12mm.
- Downloads
- 46
- Likes
- 7
- Rating
- 0
P
PrintablesStefan
Koch Curve
My attempt at a Koch curve entirely in OpenSCAD. The wall thickness is determined by T. This needs to be small for higher number of iterations. The maximum viable number of iterations is 6. Print instructions Category: Math Art Summary My…
- Downloads
- 39
- Likes
- 4
- Rating
- 0
P
PrintablesStefan
ES Pencil holder
Just to show it is possible to make something (somewhat) useful with Structure Synth. Print instructions Category: Math Art Summary Just to show it is possible to make something (somewhat) useful with Structure Synth. Print Settings…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
PrintablesStefan
ES Cactus
Fooling around with Eisenscript, this time with 3 branches. Print instructions Category: Math Art Summary Fooling around with Eisenscript, this time with 3 branches. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No…
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
PrintablesStefan
Pile of squares
Lots of boxes on top of each other. Print instructions Category: Math Art Summary Lots of boxes on top of each other. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.13 Infill: 30…
- Downloads
- 35
- Likes
- 5
- Rating
- 4
P
PrintablesStefan
Square Flower
Another Structure Synth attempt. Unfortunately the obj file needed to be zipped so that it could meet the upload file size requirements. The uncompressed squareflower.obj is 644M & the stl version is 352M. Print instructions Category:…
- Downloads
- 34
- Likes
- 11
- Rating
- 0
P
PrintablesStefan
Mystery curve
I came across this ( https://www.johndcook.com/blog/2015/06/03/mystery-curve/ ) code from John Cook & converted it for Openscad. It uses hull() & does take a while to render for high values of "res".
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
PrintablesStefan
Menger frame fractal
Variation on a Menger sponge. This may work with very good bridging - otherwise use the base option and a thick frame. The fine detail stl might work on a resin printer.
- Downloads
- 32
- Likes
- 5
- Rating
- 0
P
PrintablesStefan
RaspberryPi camera holder
This is a quick 'n dirty camera holder for streaming via Octopi so that it is at a good angle to keep an eye on my MP Select Mini printing. The camera angle can be adjusted from 0 to 50 degrees. Print instructions Category: Camera Summary…
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
PrintablesStefan
Thermochromic kettle
I bought Polymaker Purple to Pink thermochromic PLA. It changes color from purple (cold) → pink (just right) → white (too hot). Excellent for washing my dog. Just follow Prusa's recommendations for water tight printing: 3-4 perimeters…
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesStefan
TriTree
Structure Synth is an amazing opensource program which makes creating recursive 3d shapes very easy. It does not, unfortunately, have a big selection of shapes. Essentially just spheres & rectangles. It also does not have subtraction or…
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
PrintablesStefan
Arty card holder
I wanted a more or less functional way of displaying things created with Structure Synth and a card holder seemed like one option. Unfortunately Structure Synth does not import well into OpenSCAD so the base plate is added on in Structure…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesStefan
Structure Synth Castle test
I wanted to see if I could make complex structures in Structure Synth. More complex than boxes & spheres anyway. Turn out it is possible but it requires a lot of triangles. These should be printable without supports but the models should…
- Downloads
- 22
- Likes
- 4
- Rating
- 5
P
PrintablesStefan
MP Mini V2 RasPi camera attachment
Raspberry Pi camera holder for Monoprice Select Mini v2. No tools or dismantling required. I can finally make time lapses with Octoprint . Print instructions Category: 3D Printer Accessories Summary Raspberry Pi camera holder for…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
These are all currently available results.