Counting matching models…
This is a funny whistle which combines the principle of a turbine with a air raid siren. this model has almost no sense but to be fun :) it gets better over time due to the grinding of the seams on the barrel a bit of silicone spray in…
Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible -…
This is arguably the best tray for desiccant beads for the AMS of Bambu Lab. The lid has a recessed grip where a lamella of the tray sticks through. this allows to easily take out the entire tray including the lid but without the risk of…
Since i was a little bit disappointet of the relatively low noise level of the original V29 whistle, i had to improve it. This whistle has larger cavities and therefore a lower pitch. The interval between the two tones is larger and more…
Just a simple stackable Box. - one with a high opening for more volume - one with a low opening for a better acessibility when stacked If you want a version with a Labelholder, see:…
This is arguably one of the best Desktop Organizers for everyone but especially for people who 3D Print. You can organize pens, pencils, USB-Sticks, SD-Cards, 90x90mm post-its. for a smaller Version, have a look at my small version of…
Just a simple stackable Box with Labelholders - one with a high opening for more volume - one with a low opening for a better acessibility when stacked This model is a variation of my more simple stackable boxes:…
Various Cable Clips Diameter from 3-12mm up to 5 cables Nail-Diameter: 2mm
Since i didnt get the original Drybox printed well, i made my own Version. https://www.printables.com/model/423765-silica-dry-box-for-bambu-lab-ams-hydra-and-stock-v The original Version is pretty flimsy and not very sturdy. So this is…
A sleek and functional spoon holder, thoughtfully designed to make cooking tidier and more convenient. Its modern, minimalist look keeps your kitchen organized by giving you a dedicated spot to rest spoons, spatulas, and other utensils…
This is a very beautiful sounding whistle with moderate volume. i tuned the whistle to a perfect fourth: lower note is C#6 higher note is F#6 Trivia: the simple reason for this tuning is, that C#6 was the lowest pitch i managed to get…
Two-Piece Dust Cover for the Blackmagic Speed Editor. With easy to print thread. I don't know what to say… it's arguably the best design for the task :)
After my Bearing and Rolling-Element Experience, this is idea-wise not an entirely new creation. I reduced the contact area between the rings due to an elliptic shape of the outer surface. The clearance between the rings is the same as in…
Due to the current lack of available Acessoires for the new Fairphone 5, i decided to develop a Case for the Phone. It has a bumper rail of 1,8mm around the Display in order to protect the display The Cameras are protected by a 2,8mm high…
Due to the current lack of available Acessoires for the new Fairphone 5, i decided to develop a Case for the Phone to fit my needs. This case is extremely massive! I developed this case for the hard usage in my metal workshop. It has a…
fully modular rack system for ER32 collets. you can print as many elements as you need and connect them together. there are three types in order to be able to build a smooth tray without protruding connectors. ER32_Colletholder - is the…
Very simple dice cup and the last dice cup you'll ever need. with small cams to force the die to roll a bit more.
dovetail carriers are glued to any object that needs to be often relabeled
fully modular rack system for ER16 collets. you can print as many elements as you need and connect them together. there are three types in order to be able to build a smooth tray without protruding connectors. ER16_Colletholder - is the…
fully modular rack system for ER16 collets. you can print as many elements as you need and connect them together. there are three types in order to be able to build a smooth tray without protruding connectors. ER20_Colletholder - is the…
fully modular rack system for ER40 collets. you can print as many elements as you need and connect them together. there are three types in order to be able to build a smooth tray without protruding connectors. ER40_Colletholder - is the…
Three Piece Dust Cover for the Loupedeck Live Snap-in design. I don't know what to say… it's arguably the best design for the task :)
Dust Cover for the 3dconnexion Spacemouse Enterprise if you have a large enough printbed, you can use the “CoverSpacemouseEnterprise” file. otherwise, use the “…interlock_p…” Files and superglue it together.
Two-Piece Dust Cover for the 3dconnexion SpacePilot Pro With easy to print thread. I don't know what to say… it's arguably the best design for the task :)
I needed more sophisticated test-objects to check the capabilities of my printers. this test-objects have on vertical and two 30° inclined faces. i made individual objects, so i can only print the ones in question. this test is hard to…
Stand for Equipment with cold shoes for Example the Receiver of the Rode Filmmaker kit
absolutely useless bearing Standaroundthing thing i don't know if it works or prints well…. test is running.
This is a Tag, you can stick to your lens cover of your fiberlaser. So you'll never ever forget to remove the cover before you laser-engrave. I was inpired by the “remove before flight”-tags in aerosoace hangars
This Core adds more weight to the 1kg Eryone Cardboard Spools in order to work better in AMS. I constructed it to work with d=10 x 50mm Material. You can glue in the pins, then they're exactly in the center of the Spool. but that doesn't…
Dice Box for 16mm Dices
This is the most useless, overcomplicated, way-to-big pen-holder but it rotates. there is absolutely no rational reason to print this!
Dust Cover for the 3dconnexion Spacemouse
These are all currently available results.
