Counting matching models…
I slightly modified the original design to look a bit better. I printed three of them, and they all fit perfectly. Depending on print quality and window hole tolerance, the clip may need some sanding. 4 year update: After four years of…
This is an Unitra Tonsil speaker Pin/peg that holds the grille. It's modelled from Space '86 model.
Tired of losing 10mm sockets? With this revolutionary protective case, problem disappears! Take care of your last socket. Take it anywhere, always in your pocket. It can be also hooked as a keychain! It printed for me in less than 2 hours…
This model holds the gear with help of one m3 bolt. The mount is attached to the v-slot profile using two m4 bolts.
Here's a pretty good looking cable passage for 10 inch rack. It occupies ⅔ U. Need 4x M6 bolts to install. Use any piece of material you want. I used some plastic thing that I later installed using soldering iron. It's symmetrical so You…
A lock that allows you to repurpose cardboard boxes into quick access storage containers! Print everything on a side of the greatest area. Assemble as shown in the picture. The “pin” must move freely on the “hinge plate". “Cover” has to…
Here's my idea of adding external power supply to KSGER T12 station. It uses one XT60 socket and a TO-220 30A 40V dual barrier diode.
Here's a cheap 10" rack stand which can be made under 10$. I had a lot of M8 threaded rods. I repurposed them into this thing. It's pretty quick to make. The print time should be something between 5 and 6 hours. You need: - M8 threaded…
Hello. I am offering You a simple, fixed spool holder. It is designed to work with these twisted thingies that are holding your spool in one axis. There is a 8mm hole inside that model, i designed it to work with 8mm threaded rod. BOM:…
This is a complete kit for building Y axis of my printer. All you need to print is: 1x Y_motor_mount 1x Y_idler 1x Y_centerpart 4x Bearing_mount 3x Rodmount_clean 1x Rodmount_optical (I'll add mechanical endstop variant soon) Other parts:…
Mount your gift quacker on your printer! Remove the squeaking part from the duck, bolt the mount into printer's frame and put the duck on. Simple, isn't it? Quack.
A simple and small adapter to fit a 140mm fan onto a xiaomi air purifier filter. It's about 170x170x13mm, so it should fit on most printers - mine is 200x200 so all the more popular filter adapters didn't fit. Print it flat, infill…
Hey. This is an X axis that I designed to fit in my printer. I did everything from scratch. The only compatible thing might be an anet Z axis standard (space between lead screw and linear rod). Everything should fit easily. It is designed…
MultiCard – Ever found yourself missing essential tools during a study session or project? With MultiCard , simply reach into your wallet and you’re set! This innovative, credit card sized tool combines a mini square + ruler, a clip for…
Here's a holder for C47's xmas tree. Here's the tree: https://www.printables.com/model/332390-evergreen-led-candle-vase-mode
This is a simple antenna that you can make out of scrap lying around. All You need is: -4x M8 nut -2x M8 threaded rods (35 cm) -Magnet (I got mine from a broken speaker - it is 6 cm in diameter) -Coax cable
Dell wyse Z90D7 (Zx0) mount for 10 inch rack. It uses 4x M6 bolts. Works as it should. Prevents the device from getting out of the rack in any direction. Unfortunately, due to the size of the wyse itself, It occupies 1 ⅓ U.
This is an upgrade I invented just from boreness. This spacer allows You to adjust the spring force on single drive extruder. Great for long bowdens or worn out drive gear. All You need is to unscrew one of screws that holds the spring in…
This adapter has a space for two M4 nuts. Heater is screwed to them using 10-12mm M4 screws. It fits nicely, leaving some space for cables.
It's a pin for Meratronik V640 meter. I made it by measuring the original one. It fits nicely. You The only difference is the bottom part. In original design it has a little bit better roundness. It's may be hard to achieve on classic FDM…
This sensor enclosure has a M8 thread for induction sensor, M10x1 for bowden coupler. Entire thing is mounted with two M4 bolts. I used a metal ball from spray paint can, but any other <7mm ball should be fine. Triggering point of the…
These are all currently available results.
