Counting matching models…
This is a very forgiving model. You want a solid black and a good bright white for the bottom and top layers respectively, but in between, any two shades of the same color will work well. Here I use two grays, (JAYO Gray PETG and GEETECH…
This is an STL printed laying down at low layer heights with different colored filaments with the goal of blending the filament colors to make both a multi-color and exaggerated depth image much like a cameo or bas relief. The file will…
The Spaceman needs more friends! As usual, the model is generated in HueForge and requires only swap at layer height, no MMU needed. Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of…
Another 4 Color HueForge model. This time a pink peony made with very common colors. Print at 0.08mm layer heights, 0.16mm first layer. 90%+ infill (I print at 100%) Black until layer [email protected] Blue until layer [email protected] Red until layer…
All prints at 0.08mm layers with 0.16mm base layer and 95%+ rectilinear infill. Print in 4 colors All colors but the Light Gray were JAYO PETG, Light Gray is GEETECH Gray. Black until layer [email protected] Gray until layer [email protected] Light Gray until…
5 Colors Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: JAYO Black Transmission Distance: 0.3 JAYO Gray Transmission Distance: 2.5 SUNLU Red Transmission Distance: 7.5 TPOIMNS Yellow…
Seen on Twitter and Facebook - this Frog needs 8 colors (pick whatever black you want) and results in a colorful frog with wonderful coloring. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm You may print at…
The HueForge model from the HueForging Color Aware: Color Shift Tutorial Here are the swap instructions, but I've included the source images too so you can color it yourself in HueForge! Project: Female Superhero Color Aware Tutorial.hfp…
These are all currently available results.
