P
PrintablesTri-D
BME280 SHT31 SHT30 SHT3x housing with strain relief
Liked the original and modified it a little
- Downloads
- 463
- Likes
- 39
- Rating
- 5
All models
Counting matching models…
P
PrintablesTri-D
Shelly Plus 1PM Adapter for DIN Rail Bracket
This is a simple Shelly Plus 1PM adapter for the great “DIN Rail Bracket” from Fabian @Fabian_172995 . I used the heat insert version from mmuellerphoto @mmuellerphoto You need 2x M3x10 countersunk screws to fix the adapter to the bracket.
- Downloads
- 297
- Likes
- 36
- Rating
- 5
P
PrintablesTri-D
LED Lenser P7R - torch wall mount clip
This is a simple clip for a LED Lenser or similiar torch that can be mounted to a wall with Ø4 Screws. It was initially made for the LED Lenser P7R (diameter of the body = 30mm) No Supports needed I recommend to print with infill >50%
- Downloads
- 215
- Likes
- 10
- Rating
- 4.67
P
PrintablesTri-D
Armytek Wizard Flashlight - Bike Mount
This is my desgin of a bike-handle mount for the neat Flashlight "Wizard" from Armytek. The flashlight sits very tight, therefore it is not necessary to additionally fix the flashlight. Nevertheless for rough terrain some people might…
- Downloads
- 153
- Likes
- 19
- Rating
- 0
P
PrintablesTri-D
RatRig V-Core / EVA 3 LED MOD without Shroud
A small adapter that carries 2x SK6812 Neopixel LED Chips to light up the print area / hotend are. Can only used without shroud (looks cooler without anyway ;-) ) I used these chips…
- Downloads
- 142
- Likes
- 33
- Rating
- 0
P
PrintablesTri-D
RatRig V-Core 400 - DIN-Rail mounts (side)
I created these side mounted DIN-Rail holders for the RatRig400 because I wanted to be able to remove them and also just change the layout without deattaching the electronic panel. I also added a middle part piece to only mount a half of…
- Downloads
- 101
- Likes
- 19
- Rating
- 0
P
PrintablesTri-D
![FtFE "Fresh the Fume Extractor" - 120mm Soldering Fume Extractor with USB-C PD [no supports]](https://media.printables.com/media/prints/736230/images/5781873_d6f1f6bc-d55b-47c0-8af0-365e900747cc_a47cb3de-7a7e-4893-988a-d6ad689041ea/img_5850.jpeg)
FtFE "Fresh the Fume Extractor" - 120mm Soldering Fume Extractor with USB-C PD [no supports]
This is “Fresh the Fume Extractor” . HEPA Filter are useless and Activated Carbon Fleece / Mats are not useful enough to extract solder fumes! Thats why I designed FtFE ! It is a fume extractor based on a 24V Fan powered via a USB-C PD…
- Downloads
- 101
- Likes
- 92
- Rating
- 0
P
PrintablesTri-D
klicky mount for v-core 3.1 with enclosure 2.0
A remix of the klicky mount for the v-core frame with enclosure 2.0 (open front)
- Downloads
- 92
- Likes
- 17
- Rating
- 5
P
PrintablesTri-D
Feet For UGREEN NAS DXP4800+
Some feet to raise the NAS from the surface its standing on. Keeps surface from heating up and improves airflow to give slightly better cooling. Probably fits other UGREEN NAS models
- Downloads
- 91
- Likes
- 8
- Rating
- 0
P
PrintablesTri-D
Skadis Adapter - Milwaukee M18 Drill Mount / Holder
Liked the Drill Holder so i created a little adpater plate for Skadi Pegboard. To be used with 3x M3 heat inserts and M3 Countersunk Screws (M3x16) and the linked Skadis t-Nuts
- Downloads
- 90
- Likes
- 14
- Rating
- 0
P
PrintablesTri-D
Mushroom Roof Vent for waterless Toilets (e.g. BioToi) used in RV / Motorhome / Campervan / Wohnmobil
Most waterless toilets for RVs come with a 12V fan and a hose to transport the air outside somehow. There were only pretty big mushroom roof vents out there that required a big hole in the roof of the RV. Thats why I designed this one.…
- Downloads
- 89
- Likes
- 18
- Rating
- 0
P
PrintablesTri-D
WAGO 221 Holder with cable strain relief
I remixed the “WAGO 221 DIN rail holder” to make it fit to my KNX test board. with cable strain relief very easy to print.
- Downloads
- 84
- Likes
- 11
- Rating
- 0
P
PrintablesTri-D
RatRig electronic wire guide - narrower version
Remix of the original RatRig wire guide inkl. clip. This one is narrower (appr. 8mm instead of 20mm ) I used 3M tape to fix it
- Downloads
- 79
- Likes
- 23
- Rating
- 5
P
PrintablesTri-D
EVA3 top_endstop_mgn9h for ratrig vcore - with heat inserts for endstop
I remixed the ivan5rov top_endstop for the mgn9h rail with heat inserts also for the endstop, because my screws did not hold enough in the original version. I recommend to print it on the side not as in my picture shown - flat on the…
- Downloads
- 67
- Likes
- 9
- Rating
- 0
P
PrintablesTri-D
RatRig 400 V-Core 3.1 Enclosure 2.0 - printable handle // 3030 extrusion handle
Remix of the original RatRig V-core Enclosure design to print it easy and without supports. Can also be used with 3030 extrusions
- Downloads
- 64
- Likes
- 6
- Rating
- 5
P
PrintablesTri-D
ESP32 CAM Magnetic Housing / Wallmount (swivable, rotatable and detachable)
Fully printable wallmount that lets you easily swivel, rotate and take the ESP32 cam off. Everything else I guess is self self-explanatory…if not - ask :-) I also uploaded STEP Files to satisify every need…use it wisely ;-) BOM: 1x M3…
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
PrintablesTri-D
universal headset / headphones holder for monitor
Just a simple and universal headset holder for your monitor. Needs to be attahced with double sided tape. -30mm wide -4mm radius at the corner -for use on the left, just mirror it with the slicer
- Downloads
- 45
- Likes
- 5
- Rating
- 0
P
PrintablesTri-D
VESA Power Strip Mount for Samsung TV / Samsung-TV-Halterung für Brennenstuhl Steckdosenleiste
This is a quickly designed mount for a Brennenstuhl Powerstrip. Specific for the UE46ES6200.
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesTri-D
Silica Container for bucket Filament Storage
This is a simple filament container that can hold quite some silica gel. I wanted to use simple buckets to store my filament so I quickly designed this silica container. #STEPoverSTL STEP is available for all. How much is open source and…
- Downloads
- 25
- Likes
- 7
- Rating
- 0
P
PrintablesTri-D
Universal SATA HDD / SDD harddrive labeling cover
This cover can be used to label your harddrives and protects the connector during storage. They are initially made for 9.5mm thin 2.5 SSDs but fit perfectly on also on 3.5 inch HDDs. You can print them simple in different colors to…
- Downloads
- 25
- Likes
- 4
- Rating
- 5
P
PrintablesTri-D
RatRig 400 V-Core 3.1 Encloser 2.0 - modified shelf left/right
I modified the shelf that it can be assambled without removing the screw from the electronic panel. You just need to loosen the screw and push the shelf up. It leaves a little hole on top that doesnt really bother me.
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesTri-D
Tupperware Cake Taker - Fix
A fix for a Tupperware Caketaker. Use M3 Cap Head Screw with cut off cap.
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesTri-D
Dopper Carrier
This is my simple “print it yourself” interpretation of the dopper carrier that should fit all bottles. The inner diameter fits the lid, which I love because like that you can get it easily out of the way while you drink. (I guess only…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesTri-D
RatRig V-Core 3 cover plates / t-plate trim
This is a slightly modified remix. For changes see changelog.
- Downloads
- 8
- Likes
- 4
- Rating
- 0
These are all currently available results.