Counting matching models…
Nintendo Switch grip for joycon, Designed in one half so that you can print multiple in different colors and stick them together with super glue. Some users have reported a tight fit all depending on the material its printed in.
Tactical unicorn horn on a NVG mount so you can show every one that your a VERY SPECIAL soldier… The Tactical unicorn horn will make sure you never run out of ammo and you become invisible…… OR maybe NOT!! I dont know ;) Small model is…
Adjustment wheel for each of the 4 screws on the Creality Ender 3 V2 and for other pinters that use the same style of bed level adjustment. The Wheel design is based on the original wheel that is used on the Ender 3 V2 printer but without…
Creality Ender 3 Z endstop mount Created in Fusion 360 with measurements from the Z endstop mount on my Ender 3 V2 and wanted to have a spare "just in case"
GoPro mount that have screw holes.
Flashlight holder with gopro mount. Made it for holding my OLD Ultrafire C2 LED flashlight on the top of my mountain bike helmet where I have a gopro mount. The holder if made for a flashlight with a 24mm diameter body.
Mount your laptop vertically with the lid closed either for storage or as docked usage on a desk. To get the honeycomb pattern make sure you select you infill type as honeycomb and you then select your print profile to have no top and…
Desk stand for GoPro. As the new GoPro Hero 9 supports webcam mode a desk stand for the GoPro is a good idea. or use older GoPro as webcam via the hacks / mods that are out there for it. UPDATE:: Added a V2 version that have longer and…
Knife handle made for Brusletto Gambit blade. inspiration for the handle is this design on thingiverse https://www.thingiverse.com/thing:2929879
THIS WILL make your printer 9000% more efficient as well as more precise. NOT!!!! It just made for fun, but now you can decorate you Ender 3 V2 and other printers with a Z axis spindle with you favorite Lego figure or something else from…
Ikea SYMFONISK speaker grill Speaker grill is made in two parts as my printer is not big enough to print the speaker grill in one go, this how ever makes it possible to do two separate designs on the speaker grill, different colors and /…
Cage for rack mounting 2 x SATA SSDs SATA Cables are meant to be routed out into the rack Cage was meant for use in a 10" mini rack and connected to a raspberry pi via SATA to USB adapters. Print settings for me: 15% infill 3 walls
JVC BoomBox Volume and Bass Knob Not 100% like original model but just based closely on the original knob Made as replacement for a missing volume knob for a JVC RV-NB10B boombox
EDIT: The first test plates i made where printed in PLA… and they would only last about 1-2 rides… Need to try and print them in a different material as the PLA is just not gonna hold up to any kind of usage. Guide plates for Magped…
Holder for the Ingenico ISMP4 payment card terminal The holder can be fixed to a phone case, ipad / tablet case or other surface where the terminal is needed. In this use case a waiter will have the Ingenico ISMP 4 holder where mounted to…
Stand for the Framework 12 laptop. Printed in PETG, one stand should be enough, but if needed you could print two. Printed with 3 wall loops in 0.2mm layer heights helped not needing supports.
GL.iNet Flint 3 holder / mount It is meant to hold the router in place when mounted to the top surface of the mini rack There are 2 versions of this mount one with out 4mm holes from screws / bolts and one without holes if you just wanna…
Thule FreeRide 15mm axel mount Mounting mountain bike forks with 15mm through axel forks on the Thule freeride bike rack. Holes in mount are made from M6 bolts.
They are made for usage with mtb forks with 20mm axles, so no problem in using the mounts for forks with 15mm axles and again these mounts are just meant for usage to display old mtb forks in workshop, so not for usage to mount and…
Holder with a carabiner loop for the thermos / insulated GSI MICROLITE 500 FLIP bottle. Print it at 0.3mm af his gives it a nice snug fit or at 0.2mm to have it just a little bit loose, all personal preference..…
Oculus Quest battery / powerbank holder made to be used with the design by makken104 on thingiverse and his design https://www.thingiverse.com/thing:4070533 the holder prints with its own support bit that you can remove when done…
Charging port cover for Renault Scenic / Megane e-tech - Right side This is a remix of : As the Renault Scenic E-Tech and the Renault Megane E-Tech have the charge port on the right side of the car this model should now fit these cars.…
Kali Protectives Logo screw for Kali Maya 2.0 helmet Designed to replace the stock black screws on the helmet to give it a little more "Bling" The screw on the back of the logo is an M6 screw 8mm long. Print instructions Print with high…
Holder for Oneplus 7 Pro on the 8Bitdo NES30 bluetooth controller. There are 2 STL files in this one for phone with case and one for no case on the phone. Case used here (OPPRO OnePlus 7 Pro Case Pro Rugged Shield)
Holder for the ZAGG Ignition 12 IFIG12-BK0 12000 mAh Dual USB Powerbank Made this for holding the two ZAGG powerbanks i have when charging both of them at the same time as well for "slim" storage on a shelf when i don't use them. This is…
Handle for the Damixa Series 32 water faucet so its possible to open the faucet using your wrist and dont get nasty greasy hand on the faucet knobs ;) The ends are left open so thats its still possible to see the colors on the faucet that…
Holder for headphones that fits on top of a beer bottle like the Corona bottle in this case. You can either have it just balance with no problem or glue the holder to the bottle with super glue or epoxy. Tested with the Steelseries arctis…
Just something I made for my Specialized Camber 29 2016 model. The bottom bracket on my bike had some deep wear marks from cable rub from the previous owner. So I wanted to make a plate to cover these marks and protect the frame from more…
Flipper zero holder for Panasonic Toughbook CF-19 MK4 Laptop This holder is meant to be mounted in the left corner of the laptop using the rubber stop screw there. remove the screw and the rubber stopper and but a bit of double sided tape…
I wanted an extended baseplate for the KJW / KWC Co2 airsoft magazine. you will need to locate some screws that are longer that the standard screws in the baseplate to mount this addon baseplate or just glue the extended baseplate on to…
These are all currently available results.
