Counting matching models…
designed in 2 halves , everything can be printed on one bed if printing on kobra 3 with pla+ load my 3mf file and slice it, supports come off easy each half will hold ½ cup of silica gel beads, could be also just filled with desiccant…
anycubic kobra 3 filament poop catching system consists of filament direction changer and a magnetic catchment bin the direction changer is a direct replacement of the plastic cover of the purge wiper using all stock hardware simply…
The source marked this model as adult content.
print lid in place use 4 walls, 4 top layers, 4 bottom layers, 30%+ infill recommend petg filament fits neat and snug Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
anycubic kobra 3 webcam mount, built for logitech cam but should fit most cameras i have included 2 versions, one requires a m3 knurl nut and the other does not it is screw into plastic. you will need 1x m3x10mm screw to mount the bracket…
xbox 360 custom shell with internal removable 3.5" hdd hardware required heatserts m3 x 4mm wide 3-5mm long 4x m3 x 16mm screws 2x m3 x 75mm screws 4x m3 x 40mm screws 4x m3 x 10mm screws 6x #6-32 UNC screws (hdd mounting) 4x m3 20mm…
xbox 360 phat custom console shell case with dvd rom and external 2.5" drive up to 8tb bom 6x m3 70mm screws 2x m3 10mm screws 9x m3 6mm screws 2x m3 16mm screws 15x m3 4mm-W 5mm-L heatserts/knurl nuts light 6mm spring (go between button…
only part required is an ECAS fitting https://www.bondtech.se/product/push-fit-ecas-4mm/?srsltid=AfmBOooI7Rtp-v1iQylMoxYENDaBFPH00DrM3oDhajEN2gArccw7XDNS direct replacement of the 4 port hub using the stock screws
you will need 1x usb type a female socket 2x m3 5mm (L) 4mm (W) knurl nuts 2x m3 16mm screws solder on 3 wires as in the picture, i recommend awg28 or 30 you only need to wire ground, D+ & D-, don't wire vcc software can be found at…
print with 4 walls and 25% infill if your printer isn't calibrated great increase size by 0.5-1.0% as i have made the ecas fitting ports tight intentionally so they are a press fit requires 5 ecas fittings i have also added mounting holes…
anycubic kobra 3 spool holder, good sturdy design, one piece
print solid, print upright, use organic supports need 4x m3 knurl nuts for mount and 4x m3 knurl nuts pushed into fan
nice tight fit will not come loose
top bar for Anycubic kobra 2 & kobra 2 pro, may fit a kobra 1 but i dont have one to measure color co-ordinate your printer, looks great, has 6 holes in top for m3 knurl nuts in-case you want to add accessories use stl “kobra 2 top bar…
klipperscreen 7 inch display-h with raspberry pi4 enclosure and mount uses this screen https://www.ebay.com.au/itm/175931482613 needs 9x small button head wood screws and 4x m2.5 10mm screws for screen needs 3x m5 15mm screws for mount to…
print with 3 walls in any material
mainboard cover to suit stock enclosure but adds more clearance for bigger motherboards and still leaves enough room underneath for air flow it uses 2x 60mm fans has enough room to mount pretty much any board
print in place no extra parts needed, I recommend printing in clear but it doesn't have to be Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
print 5 walls 75% infill built to fit a second stock kobra max y axis stepper will upload belt tensioners to suit once i make them i have added extra holes to the mount for a brace but its not really needed
fantastic for printing petg and better than stock for printing pla massively reduces the hotend weight and puts the part cooling air flow exactly where it should be parts required: bigtreetech ebb36 can board 5015 fan ( cut off the left…
print 5 walls, 50%+ infill, use organic supports hardware needed 4x m3 x 10mm screws to mount stepper, 5x m4 or m5 x 10mm screws +t-nuts to mount to rear rail
this mount was made for the h2v2s but should fit h2v2 and h2v2s lite aswell i also have a btt ebb42 mount for this if you decide to use canbus, it will be in my printables profile…
my kobra2 conversion, btt skr pico and pi4 cover to replace the stock mainboard housing for klipper conversion this will fit kobra2, kobra2 pro & kobra2 plus may fit kobra 1 std but i do not have that machine to confirm print using…
this model opens from the bottom, built big enough to house a btt octopus max ez and a raspberry pi, this expansion bay opens from the bottom and has tie-down points for the wiring i recommend petg but should be fine with pla
print with 1mm+ top, bottom, walls, 20%+ infill will need 3mm t-slot nuts and screws to mount the expansion bay + m3 standoffs to mount your chosen mainboards the motherboard mount posts have been left out so any board can be installed
need 18x m3 knurl nuts, 16x m3 10mm screws, 2x m3 50mm screws, 4x m3 25mm screws, 4x m3 nuts print in place, the belts run close but there is clearance & they don't rub
Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
bigtreetech ebb42 mount to pair with my biqu h2v2s extruder mount https://www.printables.com/model/924433-biqu-h2v2s-mount-kobra-max-vyper-kobra-plus
Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
anycubic kobra 3 slip on top rail cover, add some color bling to your printer
suits this hotend cover https://www.printables.com/model/628129-kobra-max-inductive-sensor-hotend-cover-anycubic
5015 fanduct to suit biqu h2, h2v2s hotend extruders, has mounting point for probe or bltouch
4020 fan air assist for lasers, suits 40mm x 40mm wide laser modules diode laser cutting and engraving
for the wiper i use a small piece of silicone that i cut from a silicone workstation mat Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
print in place, 5 walls all round 25%+ infill
look at my other uploads for fan mounts and ebb42 mounts if needed
mounts to the cable chain mount above the printhead, i designed it for my h2v2s conversion but should work with most hotends and printers
you will need 1x 120mm pc fan, 4x m5 heatsets, 4x m5 35mm screws, 1x ss-12f15 toggle switch, 1x 12v power adapter (i used an old hdd power adapter) Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
These are all currently available results.
