Counting matching models…
Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…
This is holder for a Streamdeck MK1 that attaches to the end of a 4040 profile. The newer Streamdeck MK2 is not tested with this design. What you need are some countersunk M3 screws (length doesn't matter, but min 6mm and max 16mm) and 2x…
A simple mount for your Simucube Link Hub to mount it to a 4040 or 4080 profile You need 2 M4 screws and T nuts to mount it Update 15/06/24: I added the STL as well since not all slicers can handle STEP files yet.
Print the adapter and use the 2 smallest enclosed screws from the HomeWizard watermeter to mount it. You have some room to align it well. I found it the easiest to let some water run so the meter is spinning. Then it's quite easy to align…
You can use this tool to tighten or loosen the wheel nut of the Fanatec DD1 or DD2 wheel base. Print with enough perimeters (I used 5) to make it strong enough and 30% infill
All credits go to https://www.printables.com/@_hxr for the original design. I remixed it because we have 18 pencils, so 9 pencils per organizer is perfect. I also noticed the lid didn't had any tolerances implemented so I added those and…
A small clip that keeps the charge cable cover from dangling around and hitting your car. I designed it for my Smappee charging installation, but it might fit other brands as well if the diameter of you charging cable is around 16.8mm.
These are all currently available results.
