Counting matching models…
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
Update 10/24/23 Updated model now has far higher detail on the wheels I remixed the Nissan Skyline GTR model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly…
This is a fully printable, full size Iron Man Mark 42 helmet! You can read my many updates down below on how I got to this point. Print out the parts, orient them as you wish, paint them and wear it! The photos I posted are of a scaled…
These models are directly from Elegoo, they are replacement parts/upgrades for their FDM printers. Some of these come preloaded on their usb drives. I've pre-ordered a Neptune 4 Pro and will post prints once I have it! Elegoo Neptune 2,…
Update 10/24/23 Model is updated with easier to print wheel with more detail, and better tolerances on the axles. I remixed the model to be printable on the side, with built in wheels and an axle Print as oriented, no support, .2mm layer…
Toyota Corolla AE86 Trueno, famous from Initial D Print the car and 4 wheels, might need supports for the exhaust tip Original model from sketchfab: https://skfb.ly/o8CNI Check out my print-in-place optimized version of an AE86:…
I remixed the two cybertrucks designs by combining them together for a model that would work for my purposes. This model can be printed as orientated with no supports and the wheels will be able to turn. See more in my collection:…
This is a print in place MK4 (MKIV) Toyota Supra. It prints on its side with print in place wheels that move freely when printed! Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more…
Update 10/24/23 New model with better wheels, tolerances, and axles This is a print in place Volkswagen MK7 GTI. The wheels and axles are separate from the rest of the car which allows the wheels to spin freely while printing in one…
I remixed the WRX model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
I took Shadowcraft's 1966 Ford Mustang Coupe model and combined the stls for easy 1-piece printing (besides the wheels). The body should print easily, though some supports should be placed under the front of the car. Then print the wheels…
I edited the model in Blender/3D builder/Slic3r to make it easily printable. Print the car and 4 wheels, then glue them on. Be warned the file sizes are quite large. Check out my print-in-place optimized version of a Supra:…
I really liked Forker45's shift knob and the fact that H3wro's uses the original logitech shift knob cap, so I combined them together to make this! The picture of my print in black were H3wro's original model (I also uploaded his file)…
Remixed from this and the original to fit a 5x5 photo. Be warned the fitment is exact (no margin for shrink), so mine printed slightly smaller than 5" and I had to trim the picture. You might want to scale it up a percent or two for some…
This is a 1/48 scale print-in-place high quality model of a 3rd Generation Mazda RX7 The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels move. It's a fun, fairly easy print, and…
If you were following on the Elegoo discord this is PsychItsMike, several of us have been working on this project for a few weeks now, Jungle posted his wonderful work recently, these are my personal changes. Changes from JungleG1337's…
I remixed the CCX model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
This is a 1/48 scale print-in-place high quality model of an AE86 Toyota Corolla, commonly known from the anime Initial D The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels…
The minimalist controller stand has a perfect fit due to 3D scanning an xbox controller, this remix allows mounting onto a Coller Master QUBE 500, while maintaining the perfect fit and minimalist look of the stand.
IMPORTANT The datsun model has extraneous interior details, if you try to slice it normally the top shell will be only a mm thick and the overhangs won't have a chance. Fix this by enabling 'Remove all holes' in Cura, found in the mesh…
I took the wheels and axle from Le Fabshop's model and combined it with the rally car frame. Print it as is, no supports needed, and the wheels should spin. See my collection for more cars:…
This is a 1/48 scale print-in-place high quality model of a new (A90/MarkV generation) Toyota Supra The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels move. It's a fun, fairly…
This is a 1/48 scale print-in-place high quality model of a Datsun 240z, also known as a Nissan Fairlady Z The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels move. It's a fun,…
I remixed the model to be printed on its side with the wheels and axles. Print as oriented, no support needed (I used .2mm layer height). IMPORTANT: This model doesn't load correctly on Slic3r (at least for me), I have no idea why and…
I heavily remixed the model, removing all the air powered components and replacing the wheels with those from the Ford Mustang model. I then combined them with an axle and changed some sections so it could be printed on its side. Due to…
I remixed the Delorean model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
I remixed the NSX model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
I remixed the Ford GT model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
I remixed the Superfast model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
Model can't be named or it'll be taken down, but enjoy this small! car. This model prints on its side with the wheels and axle built in, print it as oriented and the wheels will spin. No supports need and .2mm layer height worked for me.…
What better sand mold than a sandworm from Dune!
I remixed the Model X model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
I heavily remixed the model to be printed at once, on it's side, and with the wheels built in with an axle. Print it as oriented, no supports, and .2mm layer height worked for me. Scaling it down may cause the windshield to not print…
I remixed the 356 model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
6 pin tray Pictured pins are from my Covert Instruments Practice Lock
This custom-made ergonomic holder allows picking Kik (Key in Knob) cylinders in your hand and provides a nice stand and place to store 2 picks. It also adapts the Kik to a Mortise size lock, allowing it to easily slide into a Mortise…
I used the octane and Dieci obj files from: [ https://grabcad.com/library/all-rocket-league-car-object-files-a-few-bonus-s-1 ] along with the octane from DerpyEyed's upload. I simplified the model a lot in 3D builder, then edited it in…
Fun little desk toy, clamp it to your desk and watch the chaos unfold. You'll need some skateboard bearings for it to move smoothly.
This is an extremely simple and useful universal phone holder. Just slip it on one side of your phone, and it will stay up, it is surprisingly study. Each end has a different size. Use the smaller side for a phone of 8-10mm and the larger…
A clampable desk mount for both a VR headset and controllers, fits my WMR perfectly, might need adjusting for other controllers.
I designed this 2024 Solar Eclipse token the day after experiencing totality up in Vermont, it captures the path over the US, the date, and a representation of the ring of fire, derived from an image shared by NASA. There is space for an…
This filament spool holder attaches to printers with a 20 20 mm extrusion frame, specifically my Max Micron prusa clone. Print with supports for the bit at the top, mine warped a bit and it wasn't a problem. It's a fairly tight fit but I…
These are all currently available results.
