Counting matching models…
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9400-16i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9400-16i, but this…
Larger spacers for the Joseph Joseph rolling pin . The largest it came with was only 3/8" (10mm). I recently needed one that was 1/2" (13mm) and designed my own. Also included larger ones for 3/4" (19mm) and 1" (25mm). Here is the source…
Adjusted the hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes. In the pictures it is 16mm and a very snug fit. In the uploaded 3mf I adjusted it to 17mm to allow for wider variance. 3mf is…
Headlight adjustment knob for US Ellipsoids in E30 / E24. Mates with PN 63121385397. This is meant to be used as a tool and not left installed permanently. Note: I've only tested this on my US 1990 325i E30 Coupe. I have not tested the…
Rack Mount L Brackets for Kasa HS300 power strip using existing end caps from this model: Kasa HS300 Power Strip Mount by Pantherclawz Best to use my remix here as there are some fitment issues on newer HS300 power strips around the…
Made this desk stand after a conversation on the AirGradient forums that there should be some airflow to the bottom vents. https://forum.airgradient.com/t/calibrate-humidity-sensor/994 Best to print flat on its back and add some support…
Desk stand for the Fortinet FortiAP 431F using the ceiling mount brackets included. The stand has holes for 2 mounting positions as the 431F either has the cables coming out the bottom but the logo on the front is upside-down, or the…
Custom inserts organize AA / AAA / 9V batteries in 6 Qt. / 5.7 L Sterilite bins (model 1751). Has cylinders on the bottom to slot into the sides of the bin. However the bins aren't perfectly parallel so it fits better the close to the…
Modified " Prusa Mini Displaybox Cover W/ USB " by 4nthonylin to fit " Prusa Mini & Mini+ USB-Plug and Power Switch Frontplates " by ChefBenni . Extended rear cover to also cover power switch. This is only a rear cover. For the matching…
Remixed the clamp portion to have 3/4" female NTP threads so I can use it with an NTP Loc-Line base. More tricky to setup since you need to run the wire through the hole at the base before soldering it together. I also used some adhesive…
Radio Support Bracket for E30 to support the radio from the rear. Part number: 65111370841 Only tested on my US model 1990 325i left hand drive with CM5908 radio. Best to print sideways like in picture with organic (tree) supports. Source…
Loc-Line Straightener tool for 3/4 Loc-Line. Need to print 2 of them. Small enough to fit on my Prusa Mini Just sandwich around the Loc-Line and squeeze to straighten, then rotate the tool or the Loc-Line to get it straight all the way…
Height is 100mm, so to get different colors insert your color change at the midway point. Source in Onshape:…
Remix of "Simple Universal Horizontal Phone Stand" to make it larger to fix my Pixel 7 Pro in a dbrand Grip case. Also added a cutout for a PopSocket. Source in OnShape here:…
Made a cap for VIVO Monitor stand that also has 1/4-20 mount. Inside dimensions are 35.5 mm wide and 21mm deep. Made to fit this Monitor Stand: https://www.amazon.com/dp/B00FOTABWY/ Used these ¼-20 screws:…
Based on "Parametric laptop holder/stand" by realrenshai on Thingiverse. Modified to add a holder for the docking station and holes so that I can still access the docking station power button. If you are going to modify the scad model…
Replacement for BMW 61131373669 "push button" that screws into firewall or other stud location and has holes for zip ties. Source in OnShape here:…
These are all currently available results.
