Counting matching models…
I created some stand to tilt the Edifier r1280t a bit. I looks much better now (i think) Please note that i made them a little to deep so a small edge showed at the front. I stuck a piece in to thicken the back a bit so the front edge…
When you want to replace your tyre on, for instance, your motor Cycle you want to protect your rim. Rim Shiels or Protectors are the things to use! Print with heavy fill in! (like 80%) Print on the side! (The stl should be in the right…
The Yamaha brand logo in two colors. Suitable for Prusa MK2 MultiColor (and others?) Print instructions Category: Keychains
My parents got another car which missed the raising bulbs to keep the seatbelt plug high (you can grab it) So i made something that could help them Update: It is advised to make this thing from ABS or other high temp plastic. Because…
This hood is SIMILAR to the EW-78E. Please note that I did a remix of a lens hood that I found online. I only resized the inner circle to match the diameter of the 15-85mm lens of canon. I still had to do a little bit of sanding here and…
This is a holder for the Skoda Octavia 2020-2024. It gives you a flat mounting spot for a phone holder or other things. I have used some double sided tape to lock the holder to the dash
I made a new version! Now in MultiColor!! https://www.thingiverse.com/thing:3291524 Check it out here! This was my first 3d creation! I made a keychain of a well found picture on the internet of a Android eating a "Apple". Nothing against…
Controller holder Pimax Crystal Light for 4040 Aluminium Sim Rigs This is a holder I Made for the Controller of the Pimax Crystal light. This is needed motion compensation. The Bolt hole is M8 and fits the 4040 of 4080 alimimium frame…
I did find allot of tablet holders for on a head rest without the need of bolts or other (non printed parts). This is fully only printed (beside a bit of glue) I created this one for the Nvidia Shield tablet Note however that you can…
I have designed this Oculus Nose Flap. This nose flap will prevent the immersion breaking light that can come in through the nose area. It can be that not all noses are "suitable" but when you have a more narrow nose it will probable work…
I created my own motorcycle mount for my Galaxy S7 Edge. Note that i have a small phone case on my phone which requires a bit of more space in the holder. Also there is space for a wireless charger but also the bottom area of the phone is…
I made pen and other stuff holder for under my computer monitor. It can also hold a phone and other stuff! no supports needed. Print instructions Category: Containers
I made a strong hook the put on the pushing bar of a buggy. This is originally for the Nuna Ivvi Savi. Happy printing! Print instructions Unassociated tags: Nuna Ivvi Savi Category: Tool Holders & Boxes
This is a enclosure for a MeanWell RS 15-12 power supply It has two holes for power in and out. A few small screws can keep the case closed or you glue it shut ;-) Enjoy! Print instructions Category: Parts
Sometimes you want to use you're strap. Some times you don't. Therefore I created the DSLR Strap clamp! Please note I have made the strap clamp originally for the Eos100d/Rebel SL1 other straps maybe to wide or to narrow. These files are…
I love my Philips Coffee machine but only the bean reservoir to small. Therefore i created a bigger one! This thing fits the Philips EP3550 Enjoy! Please donate and don't make money of this object!! (RESPECT THE LICENSE) Print…
I created a hook that can clamp on a Ikea Markus office chair. You will need this kind of modd of you don't have you're VR camera's your desk. Therefore moving the desk now with the chair! ;-) This is till a work in progress and things…
Here is the Phone Mount i made for my motorcycle. This holder is a exact fit for a Samsung 9+ with a Spigen Case Thin Fit ( https://www.spigen.com/products/galaxy-s9-plus-case-thin-fit?variant=570798145537 ) The phone slides in from one…
My second design of my first design ever! I re-made it because i wanted multi color! Print instructions Pla should be OK I used Sli3cr
I made a quick holder for my Mean Well PSU type RT-65B. There are standoffs on the holder what will hold distance from the bottom so the power supply is not laying on the wire connections. Enjoy and cheers! NO supports needed any plastic…
I totally changed this clamp because the old version did not work. I Remixed my own seatbelt clamp to hold a strap together to tighten things up :-) Clamp width small one is 30mm and hold thickness of 3 mm Clamp width big one is ~39mm and…
A battery cover for the Canon Battery LP-E12 Print instructions Category: Camera
I don't use the remote control of the Edifier r1280t much but still didnt want to lose it. So i made a small holder to keep i attached with the speaker :-) Enjoy! Please DONATE if you like my stuff! Print instructions Category: Audio
This model gives you the possibilty to mount a (good) aliexpress bicycle mount on a Kawasaki Z1000 steering block. This block is around the handle bars and therefore the mount cannot be attached directly to the bar itself. There are three…
I have created this thing since I sometimes take video and make photo's at the same time. The hotshoe place is taken by the flasher and i had no way to attach my Rode Microphone. I created this thing to clamp around the ring of a Canon…
I saw a different Aperture Logo on Thingiverse having two colors but the model itself was single stl. Therefore i made a two color version. Please note i created this from a original black/white logo. So this is not a remix. You only need…
I did a remake from my own (first) model on ThingiVerse. I learned allot over the years and now i'm able to make multi color models. These are suitable for MultiExtruder printers. I use the Prusa MK2.5s MMU2s myself. This was my original…
How annoying can it be that the band on your wristband of the amazfit constant slips off! Well.........we just fix that! Perhaps it fits other bands?? This is the smallest thing I ever made but it did took some fiddling to create it. The…
This video show how to remove the second phone holder. You can make your own flat holders to attach to the arm. The two provided are for: Samsung S9+ with a Spigen Case and Iphone XR spigen case I have created a mount point for Phone…
I created a Full printed enclosure for a raspberry pi (4 in my case). The main purpose for me it that i put SyncThing on this installation. This box can be put on a internet anyware you want and the drive will sync with your other drives.…
Note that you need m2 screws (about 5 mm long) of some glue to attach the middle piece. Note that i put some double sided tap on top of the beacn screen from sliding it out when pressing it (it behind the small ridge). Add to soft pads…
A headset hook for monitors with a very curvy back of the monitor. The IIyama G-Master GB3466WQSU has this. It's not perfect so please feel free to adjust further But good enough ;-)
I have replace my airplane connector for a extra battery holder. Now i can take a total of 3 batteries!! Please DONATE if you like! Print instructions Category: Audio
Het bekende Eysink logo als sleutelhanger! Heb je geen printer dan kan ik ook (tegen kleine vergoeding) deze ook voor je printen! Print instructions Category: Signs & Logos
I have a Shark Evo One (two) which has not much space for mounting a camera. Therefore i made this block to mount a mobius camera. You only have to tild the camera in it with 90 degrees. Perhaps it also fits other helmets. There are two…
I have made two small platforms to mount on the edge of a bedstead. I can not put a monitor camera on the edge to keep an eye on our little men. "Wieg_Plateau" is for a edge width of 23 mm "Ledikant_Camera_Mount" is for a edge of 25 mm…
I have a flat area in my car to mount holders. (designed myself) With every new phone i design a new "universal" holder. Here is my holder for my Galaxy Z fold 2 with cable mount for charging. I have a case on it the Galaxy Z Fold 2 Case…
I designed this thing to clamp a small personal heater on the upper part of my enclosure (lack). I normally let this heater warm up the chamber and than switch the active heating off as the printer produces enough heath to sustain the…
This is a slide in mount for the Samsung S9+ with a Spigen Case Thing fit. You can stick/glue this holder to any other surface. You can add a mount at the bottom for a cable for charging. This is a cheap cable of AliExpress and has a 90…
Probably all people that would read this are dutch because "Brinta" is a dutch cereal but the boxes they come in really suck as the leak allot of the cereal flakes. Therefore I made this "Bakkie" which will contain these flakes! The fit…
These are all currently available results.
