Counting matching models…
Don't look at the stl too much. The stl ist just an example, with the included Fusion 360 file you can create whatever lens hood you want! Adjust the "Change parameters" to your needs. To get the right fitting to your lens you may need to…
Holding frames to convert analog film media with a (D)SLR Get your beloved media to the digital age. Stuff you need: SLR Macro lens Flash (recommended) These parts are optimized to get the highest possible conversion quality. The lens…
Assamble as in the pictures. The Wagos have to snap in firmly. Print with PETG, fast and easy, no supports needed. place on the flat side to print. v2 is a little less snappy, Wagos are inserted and removed more easyly.
Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
Did not find here what I was looking for. So, another keystone mount. What do I think this can do better: sturdy lightweight easy to assemble releases keystone easyly is tight, but not too tight developed and tested with the cheap…
This super expensive Bosch GOF 1600 router has a super unusable vacuum adapter. Which on top breaks easily. This one is hard to destroy. The router can be used almost to minimum depth. OSVac fits directly. Print with PETG, 30% infill, 0,2…
I needed a small case to play with new RP2040 designs. This housing allows access to the optional JST XH connectors and protects the interfaces from accidental contact. A double case allows debugging with a 2nd pico. Print with PETG in…
Since a while I was searching for a decent mobile phone mount for my Smart 451 EVs. This design holds any phone with MagSafe just below the navigation system for easy access. With wireless charging no fumbling with cables needes.…
The snapmaker U1 door opens to the left and 90° only. This external print in place hinge helps to open 180° or to right side. See the pictures Use strong double sided mounting tape. Wipe with Acetone and Isopropanol (in that order!) to…
Tune your edges! These file holders allow you to tune your edge like a pro. Instructions on tuning below. I included file holders to tune your edges to 89° (most common), 88.5, 88 and 87 (super aggressive). Printing in super cheap PLA…
not much to see. Print and use if you have an old webcam. Before inserting the cam, open it and adjust the focus. It also helps to remove the folding mechanism, remove the tiny screw in the bottom. If you attach LEDs make sure to dim them…
These are all currently available results.
