Counting matching models…
Desk Cable Holder Clamp - Clamps securely to your desk, also allowing for easy removal. I designed this to be printed in the orientation the parts are in, in the 3MF to ensure strength. No supports needed, no extra walls needed. Print in…
I printed this with no supports or brim. But you can draw on supports in the assembly holes if you feel like it. Don't use supports for everything, as they will reach all the way through the barrel.. Superglue the Tip to the silencer body…
Print like original. Print four Hooks with 3 perimiters atleast. I added a strip of double-sided tape to make sure it would stay.
Just a simple remix.. For people who only has the standard sheet and want something nice aswell ;) I removed the hole for the LED aswell, because i didnt have an intention of using it. I will do more variations on request. I was thinking…
Following RJ019s method to build this module. Apparently i dont know left from right, so i accitentally built the module with the antenna on the “wrong” side, so to avoid me plugging it in wrong and blowing stuff up, i had to add the side…
Remix of Surfalex2000's Buddy box Cover to support a 50mm fan. Fan guard included. If you can't get the air vents to stay in place, use a soldering iron to fuse it in place. Worked out really well. My fan is powered by a 5v adapter i had…
24/03-2024 - Added a hook for mounting the box to an Ikea Skadis pegboard.
The fuzzy skin settings for my print is: Fuzzy skin thickness: 0.2 Fuzzy skin point distance: 0.2
Honda CBR Fireblade Plaque. (The HR10 450 is not in the model, it's the license plate of this particular recepient of this plaques bike) CBR text is printed seperately, it has a tolerence of -0.1mm compared to the base.
Should print with no supports. Preferably at 0.15 Layer Height . The 3MF contains my settings, including fuzzy skin settings (Thickness = 0.2/Point Distance 0.2) and Seams drawn at the back. The ones in the picture from smallest to…
Uses m3x10 screws and m3 hex nuts. I used deez nuts to mount them in the extrursion profile.
I recommend NOT downsizing if you are printing with a 0.4mm nozzle, as details will be too small for it.
Baby Triceratops Dinosaur which is double sided and requires MMU/AMS
Der manglede et dæksel til et “blænddæksel”?.. Fandt jeg ud af det hed…. I mit tilfælde var de brugt til at afdække samlinger til en ældgammel gulvvarme installation..
Baby Stegosaurus Dinosaur which is double sided and requires MMU/AMS
A suction cup replacement bracket for biltema Universal car phone holder. Fits the legs of ikea lack. m4/m3 screws can be used. PETG or PLA, recommend 100% infill if mounted sideways like on the pictures. If mounted inside enclosure i…
Baby Brontosaurus Dinosaur which is double sided and requires MMU/AMS
I printed mine with no support, in the orientation on the STL. If i had to again, id probably add abit of support on the arch. 3 perimiters.
Baby Raptor Dinosaur which is double sided and requires MMU/AMS
Baby Pterodactyl Dinosaur which is double sided and requires MMU/AMS
With Prusa’s NFC spool reading on the Core One, Prusa spools tell the printer what’s loaded. Everything else doesn’t. This adapter fixes that for third-party spools by putting an OpenPrintTag NFC sticker right where the reader expects it:…
These are all currently available results.
