Counting matching models…
I designed a 3D printable string action gauge/ruler that can be used to measure the string action on a guitar or ukulele. It features measurements in both millimeters and fractions of an inch. It can be optionally printed in two colours…
This is the version of the drybox feeder insert for using PC4-M10 fitting with the M10 x 0.9 thread. For the PC4-M6 version get the original design by RoboMagus (linked below). This pass-through adapter for a makeshift drybox solves…
Easily top up tubeless bicycle tires with sealant through the valve using these 3D printed funnels. No more spills or blocked syringes! I provide funnels for both Schrader and Presta valves. More info and Fusion and STEP files here.
Simple stackable painter's pyramids to print without supports. Most other I saw have circular holes on the sides, which are hard to print with no supports. This design has triangular holes for that reason.
Designed this flower/cat grass pot to be stable, so that the cat is less likely to tip it over. Printed in PETG. The pot is 85mm tall (just under 3-1/2") and 15cm across (just under 6"). Has drainage holes in the bottom. Print…
I designed a simple 3D-printed mount that allows me to store my wood lathe chucks on the wall or any other vertical surface. I mounted mine on the wall of my wooden lathe stand. The mount is designed for 1″ 8TPI thread, but if you like…
This simple filament cleaner has no hinge, and uses eight 4mm diameter 2mm thick magnets to hold the two halves together. This makes opening and closing it really simple. You need to print two halves, obviously. When gluing in the magnets…
This angled adapter allows for a very clean connection of a reverse bowden filament feeder to your MK3S printer (such as from a dry box). The adapter allows mounting two PC4-M10 fittings (M10x0.9 thread), to connect the extruder end to…
This is a clamp-style mount designed to attach anything to the Prusa MK3s frame, top or sides. It tightens with a screw and can be positioned anywhere. It provides two mounting holes on the top, two on the bottom, and four on the back,…
The air intake at the bottom of the unit is unobstructed. There is a cut out for connecting the power supply plug. You can route the cables to either side, or underneath the shelf. The buttons under the unit are accessible. The unit locks…
This remix of the excellent top hat by PrintSomething splits the corners at a 45 degree miter and flattens the backs of the middle sections. I also replaced some fillets with chamfers for better printing. I also added alignment guides on…
BOM: 4 of threaded inserts (Voron standard M3x5x4). 4 of 30mm SHCS to attach the mount and the Manta board. 4 of whatever length M3 screws you need to mount your fan. I used 25mm SHCS. Print instructions: Set “Bridge counterbore holes” to…
When looking for a pocket hole jig, I had difficulty choosing between the various versions Kreg offers. On the one hand, I wanted the Mini because it is the smallest jig that can get into tight places, and is very cheap. On the other…
I designed an all-in 3D printed table saw throat insert. It features changeable dovetailed zero clearance strips that are easy to make from 1/4″ birch plywood. The insert allows full range of movement of blade and splitter (height and…
This Pi Camera mount uses the camera case from the Articulated Mount but replaces the articulating arm with a fixed arm. The links on my articulating arm used to get lose all the time, and the 3D printed bolts kept breaking; the camera…
This C clip keeps the rollers of the top shelf rail of my Miele dish washer attached to their metal shafts. Print in filament with high point of heat deflection (e.g. Polycarbonate, ASA or ABS). I printed at 0.15 mm layer height with 100%…
3D printed insert for DIY leather finger tab for barebow archery. Ideally print in two colors (by changing to a new filament color for the last several layers). The model is provided in six variants: right hand and left hand versions of 3…
These containers fit North American caps from milk or juice cartons. Technically, this is not a remix, since I designed these from scratch, but my design was inspired by the milk cap containers by marinorl and pixi2012. The problem was…
Semi-spherical bottle stand to hold bottles upside down. Useful for shampoo, conditioner, liquid soap, dishwasher liquid. The diameter of the hole is 31.5 mm. Let me know if you need other sizes. Download STEP and Fusion 360 files from…
This arm uses two F623 bearings, which are usually used to attach a drag chain to Stealthburner (which you don't need anymore because you are switching to an umbilical set-up). You can use one or two piano wires up to 1mm with this arm.…
When I wanted to add a second M.2 NVME drive to my Dell Inspiron 5502, I discovered that the laptop did not come with required hardware. I needed to buy Dell part KYMC9 to install the drive. But what are 3D printers for? After a little…
This is a simple wall mount for the Linksys Velop 6E Pro (model MX6200) nodes. Back of the mount has windows for power and Ethernet cables. The node locks into the base of the shelf and stays in securely. The shelf prints quickly without…
A wall mount for Ukulele with narrow ledges on the right and the left, to store a tuner and/or a capo. The mount works well with my Tenor and Soprano ukuleles. The mount prints without supports and is designed for two #8 screws. There is…
Did you ever try to weigh a spool of filament on a small kitchen scale? If you lay it flat, you can’t see the scale’s display. If you try to stand it up, it rolls off the scale. This simple jig is designed to solve that problem. With it…
Design Objectives I liked the idea of the basket weave desiccant containers, so this container is an iteration on that design. Large capacity for big dry boxes. The container is 83mm (diameter) by 156mm (height) and can hold 500 grams of…
This is a large (45 cm by 23 cm) Flying Spaghetti Monster tree topper, printed in three parts to be glued together. Gluing is easy because all parts have self-aligning gluing surfaces. More information as well as STEP and Fusion 360 files…
I could not mount the D'Addario Planet Waves clip free guitar tuner (model PW-CT-21) onto the headstock of my travel guitar. The headstock of the guitar is so small that there is no way to attach it so that it would not interfere with the…
This is a corner panel remix for mounting the Bigtreetech's Smart Filament Sensor 2.0 (BTT SFS 2.0) to the Voron 2.4 or Trident canopy. The sensor is mounted at an angle and there is a pass through port for the PTFE tube, as well as a…
Prints without support. A piece of electrical tape across the top holds the batteries in.
I designed a thread stand to be used with thread cones and cross-wound thread spools (for sewing machines that don’t have horizontal spool pins). To make the stand a bit more substantial, the base can be filled with something heavy, like…
I designed a snap lid to be used with the box from the Cascade Platinum dishwasher tabs. The original lid that comes with the box is very flimsy and has a weird split design, which makes it hard to reuse. The 3.8 L box, on the contrary,…
Delta RC-33 planer (and maybe the other variants such as DC-33) has a cast iron shroud with a large dust collection port that is not compatible with the common accessories on the market. This adapter allows you to connect a 4" dust…
This is a remix of the excellent model by @spacebee_490015 Thank you for providing a STEP file! This remix adds the following features: Enlarged the two cups slightly and made them concave, so that the whole shield locks in place and does…
Spare bowl for Cat Mate C300 automatic feeder. Prints without supports! Rim needs to be glued into the bowl after printing. Use waterproof glue for that. Print in PETG for dishwasher compatibility. I printed with 3 perimeters to increase…
Smartwater bottles are very popular among hikers. I've designed these simple collar rings that snap around the neck of the bottle, making the bottles easy to mark. Category: Sport & Outdoors
EB36 board comes with 21mm long brass standoffs. Using them results in the third point attachment leg not reaching the WWG2's body by 1.4mm. This remix simply adds 1.4mm to the length of that leg, so that you could use the 21mm standoffs…
These push up blocks are designed to be very comfortable on the hands, with handles being 40mm in diameter, which happens to be the handle diameter of my favorite kettlebell. I designed these to be printed in optimal orientation with no…
I designed this box for 16 MicroSD cards to fit the lids from 3L apple cider jugs that I buy here in Costco (in Canada). But I also provide a 3D printed lid for people with no access to lids for upcycling. Your extrusion needs to be…
When replacing the front wheel fender liner on my 2006 Toyota Corolla, I encountered that the front mud flap, which is attached to the linter by two M6 bolts, needs a backer plate on the inside of the liner. The original backer plate was…
These are all currently available results.
