LayersFactory

All models

Sort order

Counting matching models…

P
PrintablesChrisTheViolaNerd

Ananas Vase

This was printed at .2mm with 3 walls, no infill, and no top layers.

Print approx. €7.89–€9.65 excl. taxPreliminary estimate for one variant

Downloads
4,835
Likes
1,114
Rating
4.94
Order a print of this model
P
PrintablesChrisTheViolaNerd

Tetrahex Ripple Vase

Print with 0 infill, 0 top layers, and 3 walls.

Downloads
20,541
Likes
5,481
Rating
4.93
Order a print of this model
P
PrintablesChrisTheViolaNerd

Christmas Tree Tealight

Each part was printed with 2 walls, 5% infill, and a .2mm layer height.

Downloads
9,407
Likes
1,761
Rating
4.85
Order a print of this model
P
PrintablesChrisTheViolaNerd

Voronoi Mushroom Lamp

Each part was printed on a P1S 3d printer. All parts except the Lamp Kit Adapter were printed with 0% infill. The Lamp Kit Adapter was printed with 5% infill. The Mushroom Cap Bottom and Stem were printed with supports. You can use either…

Downloads
5,272
Likes
2,372
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Dodecahex Ripple Vase

This model was printed at 30mm/s with a .2mm layer height in vase mode.

Downloads
4,088
Likes
1,016
Rating
4.93
Order a print of this model
P
PrintablesChrisTheViolaNerd

Mosaic Chevron Ripple Vase

Print with 0 infill, 0 top layers, and 3 walls.

Downloads
3,160
Likes
892
Rating
4.86
Order a print of this model
P
PrintablesChrisTheViolaNerd

Christmas Ornament Collection 2022

In order to make the Star ornament, you'll need to print two Star Orn Bodies, four Star Orn Arms, and one Star Orn Top. In order to make the Snowflake ornament, you'll need to print two Snowflake Orn Bodies, six Snowflake Orn Arms…

Downloads
2,602
Likes
800
Rating
4.94
Order a print of this model
P
PrintablesChrisTheViolaNerd

Ripple Heart Vase

I printed this at 170% scale on an ender 3 with no infill and no top layers.

Downloads
2,113
Likes
401
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Lotus Lamp

There are multiple configurations you can use the Lotus Lamp. You can print a single lotus and leave it on a flat surface, or you can combine it with one of the four stands included. One to four lotus bottoms and rings will need to be…

Downloads
1,927
Likes
666
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Crystal Led Lamp 2

The 2nd installation of my crystal lamp series. I used 3 led light strips to create multiple color combinations. Print instructions Print the top part with no infill and no bottom layers.

Downloads
1,799
Likes
635
Rating
4.94
Order a print of this model
P
PrintablesChrisTheViolaNerd

Dodecananas Vase

I printed this with no top layers, 4 bottom layers, with 3 walls and .2mm layer height.

Downloads
1,761
Likes
427
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Modern Lamp

The lamp top was printed with 0% infill with a .2mm layer height. The lamp base was printed with 5% infill with a .2mm layer height. You will also need to purchase a Remote Control RGB LED Lamp Kit 001. You can find them on Amazon.com…

Downloads
1,728
Likes
890
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Octahex Ripple Vase

The model was printed with a .2mm layer height, 2 walls, 0 infill, and 0 top layers. I have not attempted to print this in full vase mode, so I'm not sure what the results would be like doing so.

Downloads
1,495
Likes
316
Rating
4.94
Order a print of this model
P
PrintablesChrisTheViolaNerd

Pumpkin Candy Bowl

I've included two bowls for people with different sized printers. The larger one was printed on a Sunlu S8, but it will also fit on an Ender 3 sized printer. The smaller one was printed on a Prusa Mini+. You will need to print the ring…

Downloads
1,423
Likes
713
Rating
4.86
Order a print of this model
P
PrintablesChrisTheViolaNerd

Diva Vase

A vase with organic curvature inspired by the shape of a female figure.

Downloads
1,326
Likes
225
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Kenny Mccormic Pen/Pencil Holder

Print the body, legs, and face parts and assemble after printing. I would print the body part with a .3mm layer height, as it has some slight overhangs. No supports are needed.

Downloads
1,318
Likes
337
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Monokuma

Pictures of the printed model will be uploaded soon. This model will need supports for printing.

Downloads
1,218
Likes
185
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Crystal Led Lamp

A decorative led lamp resembling crystal structures found in caves. I designed this to be used with usb mood lights or one of those led flame bulbs. I purchased the usb mood lights at Walmart for about $4.98. The cord I used for the led…

Downloads
1,155
Likes
484
Rating
4.73
Order a print of this model
P
PrintablesChrisTheViolaNerd

Durr Burger

Durr Burger mascot from Fortnite. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: .15mm Infill: 10% Category: Video Games

Downloads
1,063
Likes
64
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Fish Scale Ripple Vase

I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.

Downloads
1,058
Likes
217
Rating
4.83
Order a print of this model
P
PrintablesChrisTheViolaNerd

Print In Place Cyberpunk Capsule

Each model was printed on my P1S with 5% infill, 2 walls, and .2mm layer height. I have printed each model multiple times using different types of filaments with varying results. Printing with matte filaments had the best results, making…

Downloads
1,004
Likes
220
Rating
4.75
Order a print of this model
P
PrintablesChrisTheViolaNerd

Hexacoil Vase

A vase formed with six continuous coils. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: .2mm Infill: 0% Notes: Printed with no top layers 1 wall in spiral mode. Category: Sculptures

Downloads
973
Likes
190
Rating
4.88
Order a print of this model
P
PrintablesChrisTheViolaNerd

Greek Mosaic Vase

Each vase was printed with a .3mm layer height, 2 walls, and 5% infill. I attempted to print in vase mode unsuccessfully as it resulted in several holes in the print. Do not print in vase mode.

Downloads
868
Likes
169
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Tri Voronoi Lamp

The lamp base was printed with 5% infill, with a .2mm layer height. The lamp top was printed with 0% infill, with a .2mm layer height and supports. You will also need to purchase a Remote Control RGB LED Lamp Kit 001. You can find them on…

Downloads
852
Likes
455
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Gem Ripple Vase

This model was printed at 30mm/s with a .2mm layer height in vase mode.

Downloads
836
Likes
180
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Print In Place Treasure Chest

This was printed with a layer height of .2mm, 10% infill, and 3 walls. No supports are needed.

Downloads
786
Likes
154
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Basketweave Ripple Vase

I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.

Downloads
781
Likes
136
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Umbrella Ripple Vase

I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.

Downloads
743
Likes
154
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Diamond Ripple Vase

There may be issues printing in spiral mode, so I just printed with 5 walls, zero infill, and no top layers.

Downloads
694
Likes
158
Rating
4.78
Order a print of this model
P
PrintablesChrisTheViolaNerd

Japanese Lantern

You will need to print six panel parts. Each part was printed with a 5% infill with a .2mm layer height, at 50mm/s. Tree supports were used while printing the top part. You can use any standard tealight or rgb tealight with this model.

Downloads
662
Likes
293
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Mosaic Tie Ripple Vase

This model was printed at 30mm/s with a .2mm layer height in vase mode.

Downloads
660
Likes
155
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Lithophane Box

A lithophane box that holds 4 lithophanes and a 9 led light in the center. Print Settings Printer: CR-10, Prusa MkII Rafts: No Supports: Yes Resolution: .2 Infill: 15% for the box parts, 100% for the lithophanes Instructions and…

Downloads
629
Likes
168
Rating
4.5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Bubble Vase and Bubble Bowl

I had some issues with printing these in spiral mode, so I just printed the two in the photos with zero infill, no top layers, with 5 parameters.

Downloads
628
Likes
122
Rating
4.93
Order a print of this model
P
PrintablesChrisTheViolaNerd

Pen Holder Bouquets

I printed these with 2 walls with a .2mm layer height with 5% infill.

Downloads
607
Likes
110
Rating
4.67
Order a print of this model
P
PrintablesChrisTheViolaNerd

Arabesque Ripple Vase

I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.

Downloads
587
Likes
123
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Fleur Ripple Vase

I printed this model with a .2mm layer height in vase mode.

Downloads
573
Likes
107
Rating
4.89
Order a print of this model
P
PrintablesChrisTheViolaNerd

Herringbone Ripple Vase

I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.

Downloads
546
Likes
115
Rating
4.83
Order a print of this model
P
PrintablesChrisTheViolaNerd

Print In Place Phone Stand

This model was printed on a P1S 3d printer. Print Settings: Infill: %5. Infill pattern: Gyroid. Supports: Not required. Layer Height: .2mm. I would highly recommend printing this with matte filaments. Silk filaments will work, but you may…

Downloads
494
Likes
96
Rating
4
Order a print of this model
P
PrintablesChrisTheViolaNerd

Pumpkin Candy Bowl 2023

Each part was printed with 5% infill with a .2mm layer height. The top and bottom part will require supports to print.

Downloads
489
Likes
208
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Star Diamond Ripple Vase

I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.

Downloads
484
Likes
97
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Chevron Ripple Vase

I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.

Downloads
442
Likes
85
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Easter Egg Capsule Collection 2025

You will need to print the adapter part in order to join each egg together. Supports were used to print the Egg Shuttle Back, Cross Egg Top and Bottom, and Tear Egg Top parts.

Downloads
437
Likes
140
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Cyclone Vase

This was printed with a .2mm layer height with 5% infill. Vase mode will not work.

Downloads
411
Likes
104
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Elizabethan Ruff Ripple Vase

I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.

Downloads
403
Likes
69
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Christmas Bell Ornaments

Each bell was printed with 2 walls, 5% infill, with a .2mm layer height.

Downloads
399
Likes
83
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Resin Easter Egg Collection 2

Easter eggs I designed in Fusion 360 and Meshmixer. Unfortunately I was unable to finished them in time for this year's Easter due to lack of materials. Print instructions Category: Decor Summary Easter eggs I designed in Fusion 360 and…

Downloads
394
Likes
61
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Tissue Box Cover Collection

Each box cover and top were printed with a .2mm layer height, 5% infill at 30mm/s. No supports are required.

Downloads
394
Likes
143
Rating
4.86
Order a print of this model
P
PrintablesChrisTheViolaNerd

L.O.Z Heart Container Ring Box

You'll need 12 6mm x 2.6mm magnets to assemble the ring box. You can get them on Amazon here Amazon.com: JARLINK 60 Pcs Refrigerator Magnets, Mini Premium Brushed Nickel Fridge Magnets, Multi-Use Small Round Magnets for Fridge, Dry Erase…

Downloads
387
Likes
159
Rating
4.8
Order a print of this model
P
PrintablesChrisTheViolaNerd

Pinion Mosaic Ripple Vase

I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.

Downloads
375
Likes
78
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Vortex Vases

Two vases unique vases to decorate your home with. Category: Decor

Downloads
358
Likes
59
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Shuriken Ripple Vase

This model was printed at 30mm/s with a .2mm layer height in vase mode.

Downloads
354
Likes
83
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Royal Ripple Vase

The model was printed at 30mm/s with a .2mm layer height in vase mode.

Downloads
348
Likes
87
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Christmas Ornament Collection 2021

I used Chitubox to slice each ornament for printing. Supports were manually placed only where it was needed. I highly wouldn't recommend using automatic supports, for there will be too many. I also would recommend using a hobby knife to…

Downloads
340
Likes
140
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Geometric Ripple Vase

I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.

Downloads
340
Likes
66
Rating
4.8
Order a print of this model
P
PrintablesChrisTheViolaNerd

Soap Cutter

A cutting tool used to cut homemade soap into 10 1inch bars. This design requires 9 left guitar tuners, 24 gauge steel wire, 2 608 zz ball bearings, two 5/16 -1(1/2) inch screws and 5/16 nut. The handles where printed with flexible…

Downloads
322
Likes
71
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Square Ripple Vase

I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.

Downloads
286
Likes
55
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Mosaic Square Ripple Vase

This model was printed at 30mm/s with a .2mm layer height in vase mode.

Downloads
286
Likes
80
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Cathedral Lamp

There are two configurations of this model you can make. Each one will require six bottom panels and six top panels. I would suggest using z-hop when printing the frame part. Each piece was printed with 5% infill, a .2mm layer height, at…

Downloads
286
Likes
175
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Pinwheel Ripple Vase

I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.

Downloads
263
Likes
56
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Modular Lithophane Lantern

A lithophane lantern that holds a minimum of 5 lithophane panels and a maximum of however many you want. If you wish to have just 5 panels, then you only need to print the base and the top parts. If you wish to have 10 panels, then you…

Downloads
260
Likes
114
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Scroll Vase

A decorative vase made in Fusion 360.

Downloads
252
Likes
72
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Christmas Tealight Ornaments

Each part was printed with 2 walls, 5% infill, and .2mm layer height.

Downloads
246
Likes
100
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Mosaic Lamp

There are two configurations of this model you can make. Each one will require six bottom panels and six top panels. Tree supports were used when printing the lamp center part. I would suggest using z-hop when printing the frame part.…

Downloads
233
Likes
109
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Tealight Pumpkin

Each part was printed on a P1S printer with a .2mm layer height, 5% infill, and 2 walls. The pumpkins were printed using tree supports with a 5-degree threshold angle.

Downloads
229
Likes
71
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

New E-Tank Koozie

Model inspired by the e-tanks found in the Mega Man video game series, used to hold cans of soda or other beverages.

Downloads
227
Likes
30
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Hex Lamp

There are two configurations of this model you can make. Each one will require six bottom panels and six top panels. Tree supports were used when printing the lamp center part. I would suggest using z-hop when printing the frame part.…

Downloads
226
Likes
112
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Mechnolia

I wanted to make something that combines engineering and art. When the Mechnolia's mid-body is turned, all eight petals open and close. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: .2 and .1…

Downloads
225
Likes
101
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Bulb Vase Trio

Three versions of a vase made in Fusion 360. Print Settings Printer: Tronxy X5S Rafts: No Supports: No Resolution: .2mm Infill: 0% Notes: I printed vase 3 faced down on the build plate with no bottom layers in spiral mode. Category:…

Downloads
217
Likes
44
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Bowser's Keep Amiibo Display Base

My second amiibo display base design. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: .1mm Infill: 20% Notes: I printed with a .1mm layer height at 40mm/s because I wanted all of the detail to be…

Downloads
215
Likes
56
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Wavey Coral Vase

Inspired by the wavy vases designed by ferjerez3d, I decided to attempt to make my own. This was printed on my Prusa Mk 2 using Stronghero3D trans yellow and esun3dfilament trans green petg. Print Settings Printer Brand: Prusa Printer:…

Downloads
208
Likes
34
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Castle Dedede - Amiibo Prop

A functional and decorative piece to display your amiibo collection. You can display up to 8 amiibo figures and store different accessories inside. I've provided different stl's for the bottom part in case you want to print it all in one…

Downloads
204
Likes
43
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Spiral Ripple Vase

Print with 0 infill, 0 top layers, and 3 walls.

Downloads
202
Likes
49
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Tie Ripple Vase

This model was printed at 30mm/s with a .2mm layer height in vase mode.

Downloads
195
Likes
49
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Cubed Lamp

This lamp design comes in two configurations. One uses a lightbulb with a 10 Foot with Wire Electric Light Socket Waterproof Plug Light Outdoor Plug Light E26/E27; the other uses a Remote Control RGB LED Lamp Kit 001. The two lamp bases…

Downloads
191
Likes
122
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Mosaic Vase Collection

I think I'm addicted to making vases. So many possibilities. Lol Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2mm Infill: 0% Filament: ZIRO pla translucent Notes: No top layers in spiral…

Downloads
189
Likes
32
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Super Mario Amiibo Castle

All parts were printed on an Ender 3 printer.

Downloads
184
Likes
90
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Resin Easter Egg Collection

A collection of nine easter eggs created with both Fusion 360 and Meshmixer, and printed with an Anycubic Photon. Each .stl file is preloaded with supports. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter…

Downloads
176
Likes
31
Rating
4.5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Bulb Vases

Both vases were printed on a Bambu Labs P1S Printer with a .2mm layer height, 5% infill, and 2 walls.

Downloads
164
Likes
36
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Fish Scale Lamp

There are two configurations of this model you can make. Each one will require six bottom panels and six top panels. Tree supports were used when printing the lamp center part. I would suggest using z-hop when printing the frame part.…

Downloads
161
Likes
72
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Dodeca Pinwheel Ripple Vase

This was printed with 5% infill, 2 walls and with a .2mm layer height.

Downloads
159
Likes
31
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Arabesque Lamp

There are two configurations of this model you can make. Each one will require six bottom panels and six top panels. Tree supports were used when printing the lamp center part. I would suggest using z-hop when printing the frame part.…

Downloads
157
Likes
83
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Voronoi Mood Lamp

The lamp base was printed with 5% infill with a .2mm layer height. The lamp top was printed with 0% infill with a .2mm layer height and supports. You will also need to purchase a Remote Control RGB LED Lamp Kit 001. You can find them on…

Downloads
154
Likes
49
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Square Diamond Lamp

The lamp base was printed with 5% infill, with a .2mm layer height. The lamp top was printed with 0% infill, with .2mm layer height. You will also need to purchase a Remote Control RGB LED Lamp Kit 001. You can find them on Amazon.com…

Downloads
151
Likes
75
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Animal Crossing House Bank

You will need to print 1 x Bottom Cap, 1 x Central Roof, 1 x Chimney, 2 x Doorknobs, 2 x Doors, 2 x Front-Back Frames, 4 x Front-Back Window Frames, 1 x House Base, 1 x House Body, 4 x Lantern Bottoms, 4 x Lantern Centers, 4 x Lantern…

Downloads
144
Likes
100
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Hourglass Lamp

You will need two 8-inch zip ties for strain relief for the led strip. I used a 10FT Monster smart rgb+ic flow led strip for the lighting. The led strip will need to be cut down to 23.25-inches. I highly recommend using super glue and a…

Downloads
143
Likes
47
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Minecraft/8-bit Led Fireplace

A fireplace that uses an led bulb that emits light that looks similar to flames. You can fine the led bulb here. https://99fab.com/collections/newest-products/products/led-flame-effect-light-bulb I used this lamp cord I found on Amazon…

Downloads
138
Likes
77
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Voronoi Snowflake Ornament

All parts were printed on a P1S printer with 0% infill, with a .1mm layer height. You will need to print to snowflake halves and one snowflake rim. Glue will be need for assembly.

Downloads
137
Likes
53
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Floral Snowflake Ornament

All parts were printed on a P1S printer with 0% infill, 3 walls, and a .1mm layer height. You will need to print two snowflake halves and one snowflake rim. Glue will be needed for assembly.

Downloads
136
Likes
64
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Monocoil Vase

A vase folded in a spiral shape. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: .2mm Infill: 0% Notes: No top layers in spiral mode. Category: Sculptures

Downloads
133
Likes
28
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Large Lotus Lamp

This model comes with two different bases. Just print whichever you like best. All parts were printed on a Bambu Labs P1S. You will need to print 1 x Adapter, 1 x Lamp Base, 1 x Lamp Base Top, 2 x Lamp Body Adapters, 1 x Lamp Body Left, 1…

Downloads
128
Likes
49
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Resin Easter Egg Collection 3

Its that time of year again. Here's another Easter egg collection I've designed for Easter 2021. I printed all ten eggs on an Anycubic Photon. Some models will need to be scaled down a little to fit on the build plate.

Downloads
126
Likes
35
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Voronoi Tree Star Ornaments

Each part was printed on a P1S printer with 0% infill, 2 walls, a .1mm layer heigh, and tree supports. You will need to print two star halves and one star rim for each ornament. Glue will be needed for assembly.

Downloads
125
Likes
36
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Amiibo Display Base

A simple display base for, 4 amiibo characters. Print Settings Printer Brand: RepRap Printer: Wanhao Duplicator I3 V2 Rafts: No Supports: No Resolution: .2 Infill: 10-20 Category: Video Games

Downloads
120
Likes
40
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Vortex Planters

Each part was printed on a Bambu Labs P1S printer with a .2mm layer height, 5% infill, and 2 walls.

Downloads
119
Likes
28
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Fractal Led Lamp

A simple lamp design that uses a 9-led push light that you can find at Walmart for $3.98 plus tax. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: ,2 Infill: 20% for the base, 0%…

Downloads
115
Likes
43
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Spiral Helix Vase

A Helical Vase. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: No Supports: No Resolution: .2 Category: Sculptures

Downloads
111
Likes
24
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Star Fruit Fractal Vase

A vase i created using Sketch-up. Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: No Resolution: .1mm Notes: Printed with 0% infill and no top layer. Category: Decor

Downloads
107
Likes
24
Rating
5
Order a print of this model
P
PrintablesChrisTheViolaNerd

Princess Lamb Bank

I was asked to design and 3d print a bank for girl, and this is what I came up with. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .15 Infill: 5% Filament: ERYONE/FILAMENTUM Pla Silk…

Downloads
106
Likes
14
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Easter Egg Capsule Collection 2026

Please be sure to print the adapter part for each egg. You will need the adapter to assemble each egg. Glue will be needed to attach the adapter to the bottom part of each egg. When attaching the adapter to the bottom of each egg, be sure…

Downloads
103
Likes
44
Rating
0
Order a print of this model
P
PrintablesChrisTheViolaNerd

Table Lamp

The lamp base was printed with 5% infill with a .2mm layer height. The lamp top was printed with 0% infill with a .2mm layer height. You will also need to purchase a Remote Control RGB LED Lamp Kit 001. You can find them on Amazon.com…

Downloads
100
Likes
45
Rating
0
Order a print of this model