Counting matching models…
125mm x 73mm x 127mm tall (4 ⅞ in x 2 ⅞ in x 5 in tall) at the top. The model is flat on the back and tapered at the front and sides so a magnetic sheet can be glued on. Or use the slotted hole to hang it on a screw.
Print with the hole side down with a brim. The print settings I used for mine in PETG is 4 perimeters and 15% infill and it feels plenty solid. If you need a custom size handle, request it in the comments (in mm): depth of hole for the…
A dual 1/4 inch driver bit holder designed to fit 18v Makita cordless drills and impact drivers. Attach with an M4 x 10mm screw. Slide bits in or out from the front following the arrows. Works best with 3 inch long bits. Print Settings…
I printed this lead screw stabilizer but it did not work correctly for me. The guide pushed the lead screw out a bit too far and the inner race had no clearance for the bearing to spin. I have also raised up the back face to prevent the…
Fits 22mm (⅞ inch) drain hoses. Print the clips on their side with 3+ walls. Avoid over tightening as the plastic can split.
Fits 10mm deep rack channels. The large hook is strong enough to hang a coat on if it is printed with 5 walls. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% triangular…
I designed this holder to fit either 3x 221-415 or 3x 221-412 + 3x 221-413 with space for an extra if desired. Slide them in from either end with the lever facing the shorter wall. Flip up the lever to help slide them out if needed. I…
I slightly changed FerriteGiant's excellent resistor storage solution in order to cut down on print time. These modified parts save about 24 hours of printing for the full set of 4 frames and 24 drawers! None of the important dimensions…
The holes in the sides are so the label can be read without taking the bottles out.
I printed with 0 top/bottom layers and 4 perimeters to let the infill show. 2 hours to print all 12 pieces.
Recommended to print in PETG with supports for the overhang. Thread in the bolt and it's ready to use.
This spacer prevents vent covers from falling partially into an oversized opening which causes the cover to deform if stepped on. Print 2 spacers for each vent. They fit together like puzzle pieces, so they are able to fit on any size…
Stick the tray to any vertical surface with tape, glue, or removable 3M strips to hold things. Scale the STL to change the dimensions or directly modify the .step file.
These are all currently available results.
