Counting matching models…
I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.
SAMLA Drybox housing Filamentalist Rewinders: Mounting for Filamentalist Rewinders inside of the SAMLA 22L Container as a Drybox. Filamentalist V3 added! (Pictures Pending) While testing V3 I found an issue that was always causing…
I printed and used the Double Layer case remix for my soldering iron and have liked it a lot. My biggest problem with it though was that when fully opened the lid did not sit flush on a table like the base does. To resolve this I made the…
I printed and used the Horizontal Pinecil Insert from @irwtdvoys for a short time before noticing it was missing the holder for the wrench and screws. To resolve this I took the insert from the original case and modified it to hold the…
Original Description Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially…
Overview: Easily restock cans without needing keep a very large stock of cans that a lot of the other dispensers expect. Side-loading for First In-First Out and to make it easier instead of needing to load from the back (which isn't…
I wanted a way to keep all of my accessories together with my Kingrinder K6 when not in use. I didn't need it to be able to “travel” as most I've seen posted as I wanted the accessories more easily accessible. I did see a stand by quorth…
I designed a new insert for the Ruggest Multipart Case (V2) to hold an ENGINEER SS-02 Solder Sucker and a 5ml Syringe to hold Flux. The SS-02 will need clearance of ~5mm above it. Either ensure an insert is facing it with clearance or use…
I really enjoy Ioannis Giannakas' version of a nozzle park and brush . As they now have a new version with a better method of adding silicone for the park I wanted to take the chance to resolve one of the few issues I had with it … the…
I really liked @ dbfrompw_852503's version as it is perfect for the small kits you get with dry erase boards. But we have a small board so I wanted to mount my holder to the wall. I removed the magnet spots and added two tabs for using…
With the CAD files released for TradRack I was able to use the original Nebula Electronics Enclosure and modify it to fit the BigTreeTech MMB MCU and still look similar to the original design. The tray still slides out like the original…
Overview: Recently built the Stealth Press 1S but had one major issue… How flimsy the build plate is! This brace is designed to solve that flaw as simply as possible without needing to replace anything you might have already printed.…
Inspired by the remix from Drakka01, completely rebuilt using the parts from Karkovski. I was having trouble with finding a buffer for my 350mm Voron V2.4r2 that was large enough to deal with the over 100cm of filament. I wanted something…
I didn't like the original logo backing cover that looked as though it needed to be glued in place. Instead I designed a negative that'll snap in and completely cover the hole. I printed mine in Clear ABS and it does a good job showing…
Overview: Replace the Stealth Press 1S Support Arm with one that can hold the CNC Kitchen Heatset Tips for the TS100/TS101/Pinecil. Details: I build the Stealth Press 1S since I had a spare TS100 sitting around after buying a Pinecil. I…
I was unable to use the original Vertical Mount from the excellently designed park and brush from Ioannis Giannakas due to the UHF length of my Xol toolhead . As I was also having an issue with the way the mount and joint fastened…
Overview: This listing will be a compilation for all of my WWG2 mods. As time goes on I may add more here as I see fit. List: Beefy Tension Arm Chamfered Filament Inlet Details: Beefy Tension Arm; I had my arm snap on me one day…
I prefer bare Meanwell power supplies compared to other types when it comes to powering LED strips around the house, they tend to be more stable for the price and are customizable for more situations. I usually mount them to a wall fully…
Duplicated the original “Modern Simple Hook” to remove the sliding screw mount in order to use adhesive mounting options. In my case I used Command Strips but double-sided tape could work as well for an even cleaner mount.
Overall: A “refined” version of the Inline Filament Sensor by Ryan-G that was remixed by Turpinator to resolve some of the slight issues I had during use. Details: I really like Ryan-G's inline filament sensor, it's simple, small and…
Update 2025-07-07 : I was having issues with some spools getting wedged between the frame and roller so I created a hub with a lip. To make this lip as thin as possible while still being tall enough to keep the spool in place I decided to…
Overview: I've been making a few modifications for the grills used by Mammoth-3D CPAP Muffler. I decided to compile them all in one place and to also include some future modifications I am planning. Details: Carabiner Grill : This will…
Remixed to utilize the 6mm x 3mm magnets I had on hand. The magnets are a tight fit so you are not likely going to need super glue. Items you need: 4mm paracord. 4x 6mm (diameter) x 3mm (thick) magnets 2x 12mm wiggly eyes. Super glue (for…
Overview; A remix of the original base to allow the lamp to swivel 360°. I found both the original base and the remixed “thicker base” flexed too much even when printed in ABS. I resized the clamp in all dimensions to reduce flexing as…
While TradRack is set up to allow any length linear rail and aluminum extrusion the extra length of it will all need to run out from under the Idler Pulley Mount as the Lower Motor Mount is set up to butt the rail against. I wanted to…
I recently moved into an apartment with concrete walls and did not want to drill holes to mount my HUGAD curtains. I made a mount that clips into the end of the rods to use command strips instead. One clip is for the smaller diameter rod…
I was originally using the bowden guide as a top-center feed for my V2 as it allowed for the shortest PTFE tube to the hotend but with a new MMU setup I no longer needed it. Instead of getting a new sheet to replace the one I cut I…
These are all currently available results.
