Counting matching models…
A gravity irrigation system for your plant pots. Easy to use! After installing it into your plant pot and partially covering the ring with soil, just add water and let gravity do the rest as your plant will have water provided all around…
These are radius blocks to sand a radius to a fretboard/ fingerboard. The available radiuses are in inches. The blocks are ergonomic. Adhesion: No Support: No Material: PLA Infill: 80%, Gyroid Resolution: 0.15mm Time: 7.25": 26hrs 16min…
Elegant design for hair accessory. Material: PLA/ PETG Infill: 80% Supports: Yes Adhesion: Raft
Easy to print luthiers' gauge is a must for quick checking fret levelling for singling out any frets which stand proud from the rest of the frets' levelling. It is suggested to have a more consistent and precise gauge is to print it out…
Easy and quick to print beads! A good selection of mainly used beads for medieval rosary beads also known as a paternoster (translated as “our father”). There are a large number of depictions of how paternosters were used and worn with…
This is a test print to check tolerances for your prints. Test starts from 0.6 offset to 0.1 offset. The pins are meant to spin. This print functions also as a fidget toy as well as a keychain. Adhesion: No Support: No Material: PLA…
An easy to print clip for your home to keep your table cloths in place. Adhesion: Yes Support: No Material: PETG Infill: 100%, Linear Resolution: 0.2mm
Adhesion: No Support: No Material: PLA Infill: Concentric, 50% Resolution: 0.15mm
Single Cassette Pedestal Pedestal for cassette tape collectors and enthusiasts. To display the cassette show-piece album artwork easily without having the cassette tape topple over while keeping a clean aesthetic. Material: PLA Infill:…
This is a levelling wheel with a M3 lock nut cavity at the bottom of the wheel. The idea stemmed after having to re-level the bed countless times due to vibrations caused during printing with the original Creality Ender 3 levelling wheels…
A push tolerance test from 0.1 offset to 0.5 offset. Adhesion: No Support: No Material: PLA Infill: 10% Resolution: 0.15mm
This pick is contoured to not only fit your aggressive playing style but is also ergonomic to play with although needs some fine adjustment with your playing style since it is 12mm thick in total. It is shaped like a spear so it is able…
A storage container which doubles as an organiser! Its volume is expandable by using the expanding wall and its volume can be sectioned off using the expansion divider. The outside has an easy grip as well as the lid. Adhesion: No…
A foldable set of fillet gauges. Radii spanning from 20mm to 10mm at 0.5mm increments. Adhesion: No Support: No Material: PLA Infill: 100%, Linear Resolution: 0.2mm
This is a print in place cover to prevent any accidental set-off of an emergency stop intended for a machine shop. The front is open so that the cover acts as a guard but still able to use the emergency stop button without the need of a 2…
This is a print in place cover to prevent any accidental set-off of an emergency stop intended for a machine shop. Adhesion: No Support: Yes Material: PETG or Tough PLA Infill: Gyroid, 50% Resolution: 0.15mm
Tray to hold sharpening stone either between workbench dogs or in a vise.
Food bowl for a large cage. Includes a stepped recess to fit most cage bottoms and has x2 2mm holes for wire to hold bowl clamped in. Adhesion: No Support: Yes Material: PLA Infill: 60% Resolution: 0.15mm
This is a small container primarily designed to discard cigarette butts but can also be used as a small trash can. The lid automatically closes by gravity. Adhesion: No Support: No Material: PLA Infill: 70% Resolution: 0.15mm Time: 3hrs,…
To use instead of coins for shopping carts. Not good for all types of locks. Mostly used for LIDL shopping carts.
These are one of the same size of pedestal but its base is not only round but can be a polygon base from a triangle to a decagon! Adhesion: No Support: No Material: PLA Infill: 10%, Concentric Resolution: 0.15mm Time: Triangle Base: 56min…
Simple mobile stand with 2 tilt angles. Fits phones that are 10mm thick or less.
An easy to print model for all your stationery needs at the office! Adhesion: No Support: No Material: PLA Infill: 100%, Concentric Resolution: 0.2mm
This sliding bevel gauge is easy to assemble. Unless edited through the parametric file, the original design uses a M6 x 25 carriage bolt, washer and wing nut. Adhesion: No Support: No Material: PLA Infill: 80%, Gyroid Resolution: 0.2mm
A quick and easy print! Adhesion: No Support: No Material: PETG or PLA Infill: 10%, Concentric/ Octagram Spiral Resolution: 0.2mm
Tumbling Tower One of the many pieces to print in order to play the game. It has been modelled to look like the walls of a tower. At the ends of the pieces, a round notch has been made to help anyone with dexterity issues be able to play…
This is a replacement print for an expression pedal pinion gear. This was made for a Proel PVP32 expression pedal but this print is applicable to most expression pedals, especially those that use the same type of potentiometers used in…
Adhesion: Yes Support: Yes Material: PLA Infill: 50%, Linear Resolution: 0.2mm
A centre square/ centre-finder for circular cross-sections such as thick dowels that need a centre found. Adhesion: No Support: No Material: PLA Infill: 60%, Gyroid Resolution: 0.2mm
This is a spool holder that requires 2 G203RS bearings and a pin head hex bolt (M4-0.7 x 12mm). The threads for the M4 bolt need to be tapped as the hole printed into the shaft is meant as a pilot hole although a threaded insert can be…
Might need some post processing fine adjustment for your specific SIP Bandsaw. This fit my SIP 14" Professional Wood Bandsaw. Adhesion: No Support: No Material: PLA Infill: 100%, Concentric Resolution: 0.2mm
This stand is each printed in 3 parts. To have a complete stand for 1 laptop, you need to print this project twice as seen in the cover photo. Each side has been split in 3 parts, with dovetail joints to key in and have the most strength.…
These are all currently available results.
