Counting matching models…
Small box to collect your cigarette filter when outdoors. Hardware: 1x Carabiner 4x Screw M3x20 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25 Notes: I used TPU for the seal…
Rugged Pokemon card box for cards with protective cover. My son would like a box to transport his Pokemon playing cards. So I took the opportunity to create one for him. hardware 6x Screw M3x30
I made my own design of a Ikea Lack drawer system. Print every part once except for the slider spacers. You need 4 of the "Slider_Spacer_6", two of the "Slider_Spacer_7" and two of the "Slider_Spacer_8". After the print you have to glue…
Garmin/Sigma Rox 11 mount above stem Again another Gramin / Sigma Rox 11 mount for a handlebar diameter of 31.8mm. I Designed this for my own needs (fits perfect over a canyon v12 stem) so i hope it fits for you. It's easy to Print but…
A bigger box store some cigarrets and collect your your filters when outdoors. I used TPU for the seal and the carabiner connector. Hardware: 1x Carabiner 6x Screw M3x20 1x Screw M3x15
Replacemant for a broken neo fighter dt-03 spoiler. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0,2 Infill: 80% Category: R/C Vehicles
An other mount for my Sigma Rox 11 (Garmin Base). This time for the Canyon G5 Stem . You need two M3 countersunk screws ... i used my dermel to shorten them. Design is basd on an other mount from Lars Vogelenzang but build from scratch.…
Since my mountain bike does not have a bike stand I was looking for a small removable bracket to be able to perform minor work on the bike. During the research I came across the "Wall mounted bike holder" from ulf3d. After I had printed…
After printing, you have to glue all parts together. To attach the mount to the backpack you still need double sided, 10mm wide velcro.
Small box for storing my mints while biking or hiking. Hardware: 4x M3x30 Screw Seal and HookLoop are printet in TPU.
An other mount for my Sigma Rox 11 (Garmin Base). This time for the e*thirteen Base (40mm) Stem . May be usable for other stems too. You need two M3 countersunk screws ... i used my dermel to shorten them.
A crown race setting tool for tapered forks. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Supports: No Resolution: 0.25 Infill: 50% Category: Sport & Outdoors
Once a year, when the days get shorter and it gets wet and cold outside, I think it's a good idea to get my Tacx out of the corner and go for a ride or two indoors. And once a year I break off the lever. This year I decided not to simply…
I lost a handlebar end plug on my MTB, so I decided to design my own. To prevent the brittleness of PLA in crashes, I used a beer cap for reinforcement. additional Hardware: 2x M4 Bold 2x M4 Nut Do not overtighten or it might break.
Last weekend I unfortunately lost the chain guide of my Canyon Spectral CF (2022). So I took the opportunity to advance the color coordination on the bike and designed my own chain guide. The chain guide assumes that the old chain guide…
A simple holder for a normal folding rule. 4 screws are required for attachment. Eine einfache Halterung für einen normalen Zollstock bzw. ne Schmieche . Zur Befestigung werden 4 Schauben benötigt.
Screw-on tunnel for connecting two wooden terrariums for hamsters, mice or rats. 1x Tunnel (outer diameter: 89mm, inner diamter 78mm) 2x Nut optional Spacer optional Endcap I printed it with a layer height of 0.2 mm and an infill of 98%.…
I had the opportunity to get a nice dropper remote for little money. Unfortunately, the remote doesn't have a clamp and I didn't want to buy an adapter for my Maguras, so I made a clamp myself. Printed in PLA with 80% Infill. additional…
Little extension for my wall mount to store my Sigma Rox 11 . The mount itself is glued in.
Side extension with build plate storage. (260x260)
A magnet solution specially created for the Golf MK2 body if the original holes have already been drilled into the body. Hardware: 8x 10x2mm round magnets 4x 3mm cutting screws I printet this a while ago on my trusty ender 3, but i…
simple pretension adjustment für the neo fighter (dt-03) shocks Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Notes: Cura: Slicing tolerance -> Exclusive…
Eine Vorderlichthalterung an der Gabel. Für Vorderlichter welche normalerweise am Lenker befestigt werden.
You have to print two of the hooks, but on must be mirrored.
These are all currently available results.
![[YAOLD] Yet an other "Lack" drawer system](https://media.printables.com/media/prints/816052/images/6305128_51da70c4-2534-4d87-802e-af94dac40c3b_43f87980-df55-4665-8297-bc1313fd827c/screenshot-2024-03-22-230558.png)
![[Schmiechenhalterung] Holder for a foldung ruler.](https://media.printables.com/media/prints/820624/images/6335956_b4f10a1b-5a18-4cc1-8dac-17133235cf52_6643a9bc-f6d6-4435-bb55-8b72ca42898e/img_20240326_123237.jpg)
![Extension for [YAOLD] Yet an other "Lack" drawer system](https://media.printables.com/media/prints/1182202/images/8891637_fb02033c-275f-467f-a7f5-4536a7bc1c64_7af81ce8-1f33-4e94-9aab-20bc19a904b0/render.png)
