Counting matching models…
This is a remix of Gimpel's awesome expanding deck box with an unlocking movement. A slight twist of the top makes the six locking mechanisms slide out and release it. While I was building two of these, I made at least small tweaks to…
I LOVED Tony's idea for MTG counters and compiled a bunch of items from the community and remixed other items to make an all out storage solution! This parametric box has been designed to hold 14 (Or 13 if you include the negative…
Although not a direct remix, I was inspired by Ian Crossley's Soft Tape Measure Spool to try to make something with a smaller footprint and no supports. TinkerCAD link here: https://www.tinkercad.com/things/44UeT2pT4gt Print Settings…
I saw Daftmike's great model for the NES Pi case and was a little bummed that it wasn't compatible with the Pi4. I made some changes to the case to accommodate the Pi4, and with my lack of advanced soldering skills, a replacement fake NES…
This is a Beer Pong Trophy I had made for a zoom tournament that I held. If you would like to adjust the text that is on the Trophy, or anything else, you can do so on the TinkerCAD URL: https://www.tinkercad.com/things/7DSiZdNch0B Print…
Miter inserts were all chewed up, so I designed new ones as close as I could to the original. Should be easily modifiable if you want to try 0 clearance insert. To connect the two pieces, I had played with the idea of a puzzlepiece-like…
I really loved the Dosing Cup Holder by tarik (Marked as a remix here) but I had a Eureka Silenzio, which doesn't come with the adjustable fork part needed for it. I designed my own to the best of my ability to match what I believe the…
There is a slight wobble due to the shape of the sloth. The tolerance I gave the holes are .15mm on each side. Feel free to adjust in the TinkerCAD. TinkerCAD: https://www.tinkercad.com/things/50kHqg9b7n6-rod-sloth-gridfinity
Created to match the counters listed in the remix, as well as the design solution I had made. Markers for cards that label you as “The Monarch” or give you the “City's Blessing” I made them larger than the normal counters as they are…
There is some play on the topside, as the rails are different depths on each side, but still works well for a wall mount. Not snug enough for a garage door.
A remix of brotherchris (From Chris's Basement) ATX Benchtop Power Supply: https://www.youtube.com/watch?v=1_cHNHGdgMg This has a few changes: Top printed in one piece Top now has a cover for the front clip (credit to Tollbringer for…
Made a pegboard adapter for my Bosch GLM 20 Laser Measure. Since I don't use it often, I have added holders for the batteries to avoid corrosion. TinkerCAD file available here: https://www.tinkercad.com/things/cf5RKsCCZpI Print Settings…
This is a pegboard holder for the AstroAI AM33D Multimeter. It doesn't get much use, so I put a cradle for the 9V as well to avoid battery corrosion. It also has spots for the contacts as well as the small screw for the battery…
My iMini 2 510 Weed Oil pen broke at the base, right below the heating element. I painstakingly recreated the shell and added a ring across the top to try to stop stress in the spot it broke originally. I have designed the canister half…
*** Opens Pokédex*** Pickleboltorb, the Pickleball mimic Pokémon. Often found in proximity to sports complexes and community centers, this Pokémon's unique color scheme allows it to blend in with pickleball equipment. Its electric…
After getting a chia pet as a gift, we had a ton of extra seeds. I decided to try to create my first .STL and make a planter for the extra seeds. The seeds easily fell off the pet, so I thought a nice horizontal plane would do well. I…
I was missing the Guide for my Bosch Planer (Model #3365). I used Cargy's design and slightly modified the bracket file to make it work. I adjusted the tolerances and made the slot on the adjuster larger for use with my model. Note that I…
This is a remix of the great designed "Ping pong paddle and ball mount" by TioEmm to accept small command strips. The body is widened and there is an indent to take away some of the depth of the strips themselves. TinkerCAD links…
This is a 51mm portafilter funnel specifically designed to be used with the Eureka Mignon Silenzio. It may work with other Mignon grinders as well. The funnel interlocks with 2 ear portafilters and omits the front of the funnel that would…
My brother wanted to make a 1 inch circle around the hole for his cornhole set. He asked me to design a stencil for that. I made an aligner as well. 1: Put the aligner in the hole 2: Put the stencil over the aligner, they snap into place.…
Made a 40mm plate for my Gourmia entry level espresso machine: https://www.consumerreports.org/products/coffee-makers-28976/single-serve-coffee-maker-29078/gourmia-multi-capsule-espreso-coffee-machine-gmc7000-396985/ I shrunk the threads…
I really liked the design of this solder exhaust, but I wanted it higher. Since I had a bunch of gator clips on my set of helping hands, I thought I would optimize this design in order to utilize them. TinkerCAD files: Corner Bracket with…
The WowGo 3 board comes with a wall hook, but I wanted something a little less invasive, so I made an easy to use longboard stand. This is a stand created specifically for this model longboard. It is printed in two parts, connected by a…
Revision: Made it only 2 pegboard hooks, removed some of the model to save on filament. Hooks should be easier now! This is a remix of the stylish Flip 3 / 4 wall mount. I took a 6 peg item from MGX's Pegstr and merged it with the mount.…
This is a remix of Fungis's Audeze Maxwell Headphone Hanger to accommodate the Audeze Maxwell 2. The Maxwell 2 has a wider headband strap. There are two models uploaded: Audeze Maxwell 2 Stand Original This model has the singular change…
I wanted a counter that worked for both power and toughness that was more than the orginal "P/T". Using the Customizable Counters and the MTG font project, I was able to combine the symbols for Power and Toughness into one counter. I…
An adapter for the following manual coffee grinder for use with a power drill. You technically can do this without the adapter, but I was worried about ruining the threads on the grinder. See it in action here: https://imgur.com/KoFtclG…
Made a pegboard adapter for my Bosch GLL 2 Laser Measure. Since I don't use it often, I have added holders for the batteries to avoid corrosion. TinkerCAD file available here: https://www.tinkercad.com/things/5W2oeQ184WK Print Settings…
My 4 year old wanted to be Rumi for Halloween, and I couldn't find necklaces to match that were free. The pendant included was made 100% by me looking at references, creating .svgs in Illustrator, and extruding into the pendant you see.…
These are bumpers that I created to fit my Wowgo 3 board. The bumpers slide on nicely and have a nice "snap" into place. They are held on by the nuts on the hardware bolts. The nice thing about these bumpers is you don't have to put…
My 4 year old daughter wanted a candy corn necklace to go with her candy corn witch costume. She saw and immediately pointed out the remixed "Cute Candy Corn". It was a bit of a challenge to get it looking nicely. I made it a solid in…
This is a badge to display your serial number after you success install GaggiMate in an espresso machine. You can get your own serial in the GaggiMate Discord. Badge is the same shape / depth of the badge on a Rancilio Silvia You can…
These are all currently available results.
