Counting matching models…
This is a Finda cable stress relief. Why another one? Because it is simple, easy to print and easy to install. The LED is still visible. If you want to better see the led print it with a transparent filament. Changes 11.5.2024 oriented…
selector front plate for prusa mmu2 and mmu2s with direct pc4m10 coupling. Meaning no hole that the filament has to pass trough. Design is done in openSCAD. File is include. If you want to modify it you need to add…
Print instructions see original post https://www.printables.com/model/451501-mk4mk39-printable-parts Print in the provided position without support. The existing screws can be reused. If you have a collision with idler or motor mount you…
The original fan shroud was not created be me. Link to original upload https://www.thingiverse.com/rh_dreambox/designs https://www.thingiverse.com/thing:3249344 CAD model is done in OnShape and can be viewed here…
The original backshelf clip is kind of flimthy and I broke it by accident. I designed this printable version as replacement. The two halfs should be screwed together with M3 bolts and if you have use a washer. The parts should be printed…
I test different fan shrouds for my MK3S+. Since the cooling isn't symmetrical a one sided overhang test didn't make much sense. So made 4 sided one. The overhang angles are 30, 40, 50, 60, 70 deg. The overhang angles are 60, 70, 75, 80,…
I have an Ikea Lack enclosure V2 for my MK3S+ with MMU2S. After building a RMU MK3 I wanted to mount the buffer on the outside of the case. I didn't find any (good) solutions on the internet. So I made my own. The buffer can be found here…
Keycap with ubuntu logo. More specific: R1 (ESC row) oem profile keycap for cherry mx stem Can be printed with FDM 0.4 nozzel reasonable well. SLA will look better…
For assembly instructions see the original upload https://www.printables.com/model/31558-big-einsy-case Instead of the nuts and square nuts you will need 10x M3 inserts Hole diameter for insert is 4mm. I modified both the original and a…
Cover for 5.25 slot in Fujitsu mini tower Esprimo D756 I printed the cover in PETG. The flexibility helps with installation.
ID card holder the can be glued together and hold 2 cards. Support in the corner is easy to remove. For easy alignment for gluing, there are 2 holes to stick a piece of filament thru. OnShape Link:…
For assembly instructions see the original upload https://www.printables.com/model/31558-big-einsy-case Instead of the nuts and square nuts you will need 10x M3 inserts Hole diameter for insert is 4mm. ------------------------------------…
This is a remix of the original mmu2s selector from prusa. I always had problems with the reliability of the finda sensor in the selector. I first tried the mod with a magnet e.g.…
This a remix of the Moai sand mold. I added 8deg draft, so you get the cast out without damage. The mold can also be clamped together and is self aligning. The file “moai_supported.3mf” contains all needed support for easy printing.…
Soap container for foamie solid shampoo. Features: Big enough to hold a foamie solid shampoo Can be screwed closed It is splash water resistant Can be opened partly to dry soap without falling out Can be taken apart to clean You can print…
Some simple feet for the Fujitsu mini tower aka. ESPRIMO D series. The measurement was taken from a D756 but it should fit all D series cases. You need 4 “standard” pc screws to install the feet. See the head shape in the pictures.…
I had to change the rear gear of my bicycle gates belt system. The original beltspaner is kind of expensive and i use it maybe once a year or so. So I designed a simple spanner for the gear with 19 to 24 tooth. The 19 and 22 tooth design…
I needed a tray for my bicycle repair stand. Since most of the time the stand is tugged away in the corner the tray should be removable. So I created a cone adapter that is small and stays on the stand. The tray can be hooked in when…
This is light weight version of the ECAS04 holder for ryper MMU2+1S 10. In the original holder the ECAS04 didn't snap in at all for me. With this design the ECAS04 snap in quite some force and stay put. You can also remove same by…
The adapter fits standard 22.2 mm handle bar. You need 1x m3 nut 1x m3x10mm screw Should be printed in PETG, ABS, ASA or similar. The 3mf is correctly orientated with support. For assembly bend the metal part a bit apart. Then insert the…
The measurement was take from a Philips Ultinon Pro6000 Boost. That is the led for H7 mounts. Philips product code PX26d. I have not tested it yet so use at your own risk. Material should be at least PETG better ABS, ASA because of the…
I moded my Grado sr125e headphones with a mini xlr connector. The cups should fit on the following models sr80 to sr325 all letter version. The cups are still glued on with hot melt glue. The cables are routed throug the blocks. I sleeved…
The 2 Brooches that holds Dr Strange's movie cloak. The original model is from thingiverse. I just fixed the stl file to be printable.
Miele Dunstabzugshaube Winkel Miele Kitchen Hood Bracket Part Nr. 8454000 Replacement bracket. The print part is not left/rigth symmetric. Mirror the stl or use the 3mf file. Use the suggested print position in the 3mf for strong part. I…
These are all currently available results.
