Counting matching models…
This is a Air Buffer to prevent light from coming inside the tent but still enable air to flow. I recommend printing it in black or any other dark color to restrict as much light as possible. Outer Diameter is 160mm such as the holes in…
I remixed Heblyz design and added a radiator mount on the back/top. I only printed it so far, not tested yet tho. The measurements should work to mount a Radiator via the fan screws onto the mount. 240mm radiator should fit perfectly.…
I designed a clip which is pretty tight fit to 16mm poles on a Growtent. The clip itself is slightly bendable so depending on what material you print it you can easily fit in 10mm cables/tubes in it.
A ratchet for various usecases. Printing: No supports, 0,2mm layer height, 4 perimeters, 15% infill Assembley: Baseplate > Spring + Stopper bottom + Ratchet bottom > Rope/Cord > Ratchet top > Stopper top > Topplate Tools req.: You will…
Original File “Fan holder” by Ka6lui Since the genuine model was way too loose for my Poles (16mm), i made it a bit tighter.
This bow can be inserted in a 40x40 Box/Tent to get a little bit more room inside. Three of them per side are a great improvement in space. I used a M3x15 screw to connect both parts. But anything as long as or longer as a M3x10 screw…
Print in vase mode. Use large nozzles for reduced print time. For example: 0.8mm nozzle, 0.6mm layer height and 2mm extrusion width 1.2mm nozzle, 0.7mm layer height and 2.5mm extrusion width etc Remember to slow down print speed. It's…
Inspired by DBert's design and added another seperated chamber to water/dung two plants independently. You can use M4-30mm (nuts outside, see my Pics) or M3-25mm screws (nuts in the slots). Printing : Print it standing with the tubes on…
Since i already printed the original file from RockChewer before the upgrades with the lifted Glasslid came out, i decided to remix some inserts for the sides to mount the Glasslid on the genuine file so i dont have to reprint a new Riser…
Remix of chiz design, just for 8x2mm magnets
Cap with a little "separator" to prevent the terminals to touch, in case of using single wires for each Terminal.
These are all currently available results.
