Counting matching models…
MAR 2025 update: tweaked the base auto grip files and solenoid core parts to work with the fileset. Extended parts that needed it. DEC 2024 update: Minor tweaks, added a grip/receiver combo that can be pinned together rather than screwed…
New file 2/7/19 that should address length and dart fit issues I had in earlier version. All versions work in mk18. This is a remixed version of slug's shell modified for printing. It should replace stock shells. I made one and it worked,…
Mk.S Sight: See also my & /u/ mrheathpants ' new MHP Fauxolo sight here ! I needed/wanted a fairly basic adjustable scope so I knocked this out. Uses #6 screws/bolts and glue. No support required, parts may need to be laid flat. Print one…
I needed/wanted a fairly basic adjustable scope so I knocked this out . Mrheathpants then made something much better looking but not adjustable for a project he was working on, which I then demanded he share so I could add my sight pieces…
( https://www.etsy.com/shop/meakerarms ) Thank you for your support. Update 08/26/19: Added the experimental "XL" files for a dual-cage setup. Currently designed for OFP riot; any stryfoid should fit. An Ultrasonic2 has released an…
Another model I've just been sitting on : the Mk-LC10. It uses old fusion design's flycore for power available here: https://www.printables.com/model/286951-ofd-flycore-straight-talon-design-your-next-printe Additional hardware includes…
BEHOLD! The Mk42 Chain Fed Half Dart Fully Automatic Blaster! I'm releasing this for free, not on my etsy, due to the myriad of other designers whose work I have built upon with this one. While the final product is absolutely my own,…
Not a lot of description for this one, it's a remix of the two and low-hardware; you'll need an ESPER PT, plunger orings, a face seal oring, a couple screws, and elastic. I don't expect many people to build it, but the step is included so…
https://www.etsy.com/shop/meakerarms Thank you for your support. After way longer than I'd intended, I'm pleased to present the: Meaker Mk16 Flywheel Blaster A solenoid-driven flywheel powered small/medium blaster with a built-in stock…
This is the 40mm version of the Mk48 Party popper, which is 48mm. The instructions are the same for both. A pin attaches the trigger to the bottom, the plunger rod gets screwed into the plunger, and the plunger goes into the bottom…
Not a ton to say about this one. It's an adapter for if you do not own/use ryobi tools but want to use my recent blasters which use ryobi tool packs. It's just an empty case in three different sizes for holding batteries on the ryboi…
This is a blaster I was working on for some time trying to solve the rotation mech. Eventually I figured out a way to use a rubber band to make essentially a top-off-able hurricane-style cylinder-mag. I’m not happy with the level of…
( https://www.etsy.com/shop/meakerarms ) Thank you for your support. I'm happy to announce my newest printable blaster, the: Meaker Mark 29 Gryphon - "Opinicus" A manually actuated semi-auto mag fed on-the-fly top loading flywheel blaster…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a generic standard infantry soldier. Printed for me…
This is a pegboard system designed around a unique peg with a hexagonal profile for easy printing that clips securely into (North-American) pegboards. The profile also makes the mating 'dovetails' on the attachments easy to print in…
Instructions in the files; this is an OG-Nerf-internet-community style blaster built from random pipe and hardware store parts. No printable files, for reference only.
This is a model of a 35mm solenoid intended for use as a nerf pusher, originally found by /u/thejesusfreak on reddit. Should be similar to this one on banggood, probably also available on eBay/taobao/etc. if you google it. This is a…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a US Joint-Light Tactical Vehicle (JLTV) armored…
Since thingiverse appears to be functioning again, here’s my mod of Caffeccino’s beautiful Serval blaster. Lots of quality of life improvements, including better wiring provisions and room for a solenoid. Designed around the mk16 style…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a generic standard infantry soldier equipped with a…
This is a remix using Slug’s HYPR as a frame to make it fire my mk44 “party popper” shells. These shells are springloaded direct fire self contained blasters - similar to the crossbolt, except that it’s an open plunger that can fit…
( https://www.etsy.com/shop/meakerarms ) Thank you for your support. This is a redraw of Ansuzalgiz's Falcon . At the time of redraw, it was licensed under the GNU/GPL 3.0 . This license permits: Commercial use, Modification,…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a US Bradley Infantry Fighting Vehicle. The turret…
Finally posting this, having released the Mk17 Meakout and Knockout-mk18 to my Etsy Storefront . It will need support and should fit on by pressure, but you may want to glue or otherwise adhere it. The breech may need to be upgraded to…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian BTR-series Infantry Fighting Vehicle - at…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is an infantry soldier equipped/posed as a Designated…
10/1/19: Added the Plunger Internal, rambase through, and shell_brass_back files. These are a strange set that allows the barrel to nest mostly within the plunger tube, and replace the normal rambase, plunger, and shell/barrel. The shell…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a generic standard infantry soldier leader - officer,…
If you like this, please consider supporting me by visiting my Etsy shop ( https://www.etsy.com/shop/meakerarms ) I'm happy to announce my latest blaster, the Meaker MarkSK - SkeletonKey The smallest blaster/masterkey there is! This…
I wanted to improve on the classic nerf “mobstacle” design from Nerfhaven which used PVC and tarps to create inexpensive, lightweight cover for use in tagging-sport (nerf, airsoft, paintball, etc) field design. I also wanted to create a…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a US Stryker Infantry Fighting Vehicle, but it is…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a generic standard infantry soldier with a mortar.…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian BMP-series Infantry Fighting Vehicle - at…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a generic standard infantry soldier in the prone with…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a generic standard infantry soldier with an LMG / SAW.…
Say hello to the newest printable blaster you’ve all been waiting for - the Mk31 Wand! One part to print, no assembly required, grab it off the print bed and start flinging foam! use at your own discretion, posted with no warrantee given…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a generic standard infantry medic - while yes, medics…
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a Russian TIGR-series Truck. Printed for me without…
Model of a hurricane mag with some modifications I was looking at. It's cheaper to buy than print, so I stopped messing with it, but I've included the .stp file to make changes with. Recommend a rubber band or elastic fastened to the…
I'm not planning to do a ton of support on this; but here are the files for my 3d printed version of Captain Slug's Durendal homemade ranbow-catch blaster. This catch puts the load onto screws or other hardware and keeps the printed parts…
As I am not versed in the machine language, I have been forced to come up with an analogue solution to a gameplay aid I've wanted for a long time. Historically, to play king of the hill rounds in Nerf battles, I would use two (or more)…
These are all currently available results.
