Counting matching models…
Boxturtle enclosure user mode. Four 380 mm profiles, two 360 mm profiles, and two 220 mm profiles have been added to the Boxturtle base model. PTC heater can be controlled by STC-1000. The front panel is modeled after Ratrig's enclosure.…
The structure is made with 2020 aluminum profiles and polycarbonate panels , making it a cost-effective alternative to a typical four-slot filament dryer .
This is a Ratrig-style kinematic bed assembly for the Voron Trident R2. You need to drill two new holes in the front of the original bed. If you have a drill, it won't be difficult to locate the exact positions and drill.
The Y-belt tensioner is a proprietary design. I hope that if there are any improvements that need to be made to the design, the brilliant designer will make them.
Adapters to install ebb36 on Ebb42 mounts for Vcore(Ratrig)
You can apply Vcore4.0 HYbrid XY to Vcore3.1 (or3.0). To do this, you will need to obtain the metal parts used for the Y-belt tensioner and centripetal joiner in Vcore4, and drill holes in the front frame. I used the motor dampers…
This is a Ratrig Hybrid 6WD front gantry designed for the INDX XY motion system. To reduce Y-axis losses that were present in the previous 6WD design, the installation direction of the Y tensioner has been reversed. The front motor mount…
This is a Front gantry that allows INDX integration on a Ratrig printer. The design focuses on keeping the manufacturing cost low. All parts can be made from sheet metal , and the INDX mount is available in two versions: a sheet-metal…
[Ultra-Rigid Hybrid Gantry for 500-class Large-Format Printers] This design is a specialized evolution of the Dual Rail Gantry originally seen in the Rat Rig V-Core 3.1, now fully optimized for compatibility with the V-Core 4.0+…
Magnum Plus Hotend Toolhead for RatRig4.0 & 4.1 Since Disrupt has not been officially released, I designed this as an independent model based on reference photos. Only three sheet metal parts need to be fabricated, so the production cost…
Mommoth toolhead for K3(annex) It is a toolhead designed for use with the Annex 3D printer. It was designed using the filament cutter from VzBot and the duct from the Mammoth toolhead.
These are all currently available results.
