Counting matching models…
This is a concept of what a LEGO x KAWS Companion could look like. There are 3 variations of the head. One is just a regular lego head with a cap for the ears. The other two have the ears attached to the head, the only difference being…
Makes your apple watch look like a gameboy when charging. Print upright with supports as needed.
3D printed version of the Nomad MagSafe charging stand. Pause mid-print to insert 3 ASC ¾" washers for weight in the base.
Printed at 0.35mm height with 0.6mm nozzle on mk3
Containing 4 pockets to accommodate your most used items, this tray is designed to make your life easier and more organized. Can easily slide under a desk shelf system or remain in the open for convenient access. Pictured is the original…
I made this to transport my mouse to and from the office without worrying about it being damaged by other items in my bag. Uses eight 6x3mm magnets to hold the case closed. These will need to be glued in. The text was added in prusaslicer…
I made this to see how the Ultra fit on my wrist compared to the other sizes. The version with a separate Digital Crown uses two 4mmx2mm magnets to attach the crown to the body.
A 3D-printable housing for your Google Home Mini smart speaker. Gives it some extra character and a modern look. UPDATE 3/13/2024 Added 6x3mm magnets to attach the pieces, and increased the size of the hole for the cable. New files are…
A planter that looks like a HomePod mini! Perfect for the apple enthusiast. It has a small hole at the bottom to allow water to drain. Also added a model without the drain hole.
I printed at 200% with a 0.6mm nozzle, but the original size should be very close to mini-figure scale.
A tiny version of an armchair that can be scaled to whatever size you need!
The model features two designs: The first is a mount that holds the official Apple MagSafe charger, and the second features a DIY solution if you do not have the MagSafe charger. The MagSafe version has 2 files. One has a puck…
A 3D-printable case to make your google home mini look like a turtle. Used the Google Home Mini model by max dahl as the reference model, but had to scale it up by 1.11435 Print Settings Printer: Prusa Mini Rafts: Doesn't Matter Supports:…
A printable version of BMO from adventure time. Can be printed solid in a single color or in separate pieces. I recommend printing with BMO sitting upright. The arm pieces may need a brim, and a 0.4 nozzle is best for the smaller pieces.
3D-printable replacement thumbstick for Xbox One controllers. Print Settings Printer Brand: Prusa Printer: Prusa Mini Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Prusament PLA Black Notes: May need to scale up by 25.4…
Featuring a geometric body, and knurled cap, this is the perfect way to elevate your simple metal pencil sharpener. The base catches the pencil shavings and can be unscrewed when full. It uses this Staedtler pencil sharpener . Enjoy!
Thumby will help you hold your book open with one hand more easily.
Tako-Chu's name comes from the Japanese words tako (タコ ? ), meaning octopus, and chu (ちゅ ? ), onomatopoeia for a kissing sound, referencing the shape of their mouths. Print upright! May need some support directly underneath the body. Can…
Dimensions: Small: 160mm tall Larger: 240mm tall Scale as desired. No supports needed
a model of the MagSafe Battery Pack from Apple
A convenient place to store your theragun mini when not in use. Print Settings Printer: Prusa MINI Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: Overture PLA Matte Black Notes: Made to print flat on the back of the model.…
A model of LEGO part 4360, commonly used as either a camera or a gun.
Switched from google nest to ecobee so I needed a new trim plate. There are two versions. One is flat and the other is slightly rounded.
This desk tray was made to provide a convenient place to charge your phone, AirPods, or other QI compatible device. It includes a slot for a pen/pencil, along with two other small compartments for keys, headphone, coins, or any other…
From Muuto: “Sketch Toolbox assists in everyday tasks both at home and in the office – and can even be effortlessly transported between the two thanks to the convenient carrying handle. The sympathetic storage box designed by Thomas…
I used a single color printer and just added a filament change for the raised letters/numbers. Scale as needed to fit your printer. I've added the f3d file if you want to adjust the font. Based on: https://www.ringadate.it
Can be scaled up or down to desired size. The attached file has 3mm walls.
A small lattice/trellis that can be used to support plants such as herbs.
Print at 75% scale for vertical cards. Print on the side for easiest printing
Pictured side by side with original Pen Type-C which uses smaller cartridges. This version is made to fit any Pilot G2 refill
A convenient tray for your Magic Trackpad, slightly elevating it and giving a new look to your workspace. Rubber feet used from adafruit: 4 x Little Rubber Bumper Feet - Pack of 4[ID:550] = $3.80 I'm sure any would work though. Keyboard…
My hat clip broke so I modeled and printed a new one.
Uses three, 1.125" wooden dowels. I got mine at Home Depot. you can set the number of top layers to zero to get the infill look. Then you just play with the number of vertical walls so there aren't any gaps along the ridges. I would…
A convenient tray for your Apple Magic Keyboard, slightly elevating it and giving a new look to your workspace. Cork can be added to the base for a more premium feel/look. You can also find the Trackpad Tray shown in the cover photo here…
Made a bed frame for my squishy purple sample. Just for fun :) Print Settings Printer Brand: Prusa Printer: Prusa Mini Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15% Filament: SUNLUU PLA MARBLE Notes: Printed…
A hook that can fit up to a 40mm diameter rod
Sometimes we all need a bit of help :) this lil crutch can support your green friends who can't quite hold themselves up. Scale up or down based on your needs! The tiny ones are so cute
Charge your Apple watch and iPhone in one place. Utilizes magnets to hold the 2 parts together. Takes a total of 14, 2x6mm magnets. There is also a chamfered version, as well as one that has the two parts combined.
A decorative stand to charge your Apple Watch! 137 mm tall. Print Settings Notes: May need to scale up by 25.4 (multiply one of the dimensions by 25.4) Should be 137 mm tall. Category: 3D Printing
I modeled the workbox in the actual dimensions, so it will probably need to be scaled down to fit your print bed.
This case holds the 1st gen Theragun Mini, protecting it from damage. I plan to add a version for the slightly smaller, 2nd gen mini. It uses 4, 6x3mm magnets to hold the case closed, but you may want to add more. I have included the…
Liven up your workspace with a helpful BMO case to tell you the humidity and temperature! There is a solid version with just the arms printed separately, and a version with individual buttons if you want to have the most accurate BMO.…
A simple stand to hold your quip electric toothbrush. I also used it as a test print for my Prusa mini Category: Bathroom
This model used a generic wireless charger, but the model could be adjusted to accommodate others. Schedule a pause/layer changer in the slicer in order to insert the charger mid-print.
I bought this camera at a yard sale, and it did not have anything to protect the lens so I made a quick model, added the logo, and printed it on my Prusa mini. Print with a 0.4mm nozzle for higher resolution.
Can be scaled to a various sizes to create a whole sparrow family. There is a “whole” version with all the parts together if you are printing as a scale where the individual parts are too small. Papa: Width: 9.3 cm Depth: 11.5 cm Height…
These are all currently available results.
