Counting matching models…
A model of a screw compressor at 1:1 scale for pressurizing air to 10bar. Made as a bachelor thesis. See pictures for assembly. Hardware: 8x M8x35mm bolts 8x M8 washers 8x M8 nuts 14x M5x20mm bolts 14x M5 washers 6x M3x10mm bolts 6x M3…
Adjust cylinder diameter to fit your lamp fitting. Print in vasemode
Store up to 6 Kodak 35mm film rolls in their canisters. Caution: designed to fit Kodak 35mm canisters. Compatibilaty with other brand film canisters is unknown, but you can always just put the film roll without the canister in the case if…
Print in vasemode. Use a scraper to remove the print from the buildplate!! Bending the plate will split the print. Hole is for a 40mm fixture but can be modified in the .3mf file.
Polaroid sx-70 recock idler gear replacement. Print with 0.25mm nozzle. Push over rivet.
The .3mf file contains a set of 4 corner clamps ( 2 mirrored pairs ) to clamp the corners of a PCB and 2 mirrored straight clamps to clamp the sides of a PCB. The .stl files only contain the corner and straight clamp in 1 direction, to…
Use 1m neon ledstrip (thickness ~6mm, height ~12mm) and push it in the print to create the kanji symbol. For the stand use a 6mm diameter rod that is minimum 85mm long.
Use 1m neon ledstrip (thickness ~6mm, height ~12mm) and push it in the print to create the kanji symbol. For the stand use a 6mm diameter rod that is minimum 95mm long.
Use 1m neon ledstrip (thickness ~6mm, height ~12mm) and push it in the print to create the kanji symbol. For the stand use a 6mm diameter rod that is minimum 85mm long.
For use with standard 3.5" x 2" business cards. Included gcode for prusa mini+ with 0.4 mm and 0.6 mm nozzle.
These are all currently available results.
