Counting matching models…
Printed with PETG, 15% Infill. No Support. You'll also need an M6 socket head cap screw and an M6 nut. Consider decreasing the layer height on the top section of the AirTag bracket model. The walls in that area are relatively thin, which…
Wera 816 RA Ratchet screwdriver (Ratschenschraubendreher) Case, supports Bits from Wera BC7 BiTorsion 1 You need 8 x Neodym magnets ⦰5x4 mm
This 3D model is a custom bleed block designed for Shimano 4-piston hydraulic brakes. It’s a practical tool for aligning the caliper during brake bleeding, ensuring precision without hassle. The design emphasizes easy assembly and…
The dog leash organizer-handle can be used with a conventional rope and serves as a reel to carry the leash comfortably, e.g. on the belt.
Tissue Dispenser for Toilet paper Before putting the toilet paper roll into the dispenser, remove the cardboard roll in the middle first and push the paper from the middle of the role through the hole in the dispenser. There are two…
These cleaning blocks are designed to help with the maintenance of Shimano 4-piston disc brakes. They ensure proper spacing while cleaning the pistons, making the process easier and more effective. Printing Instructions: • Material: PLA…
OneUp V3 Dropper Upper Bushing replacement part. Printed with PETG, brim and 0.15 layer height.
Shaving brush holder for MÜHLE Rytmo Black Fiber Shaving Brush . The holder consists of two parts. Just clue them together. Printed with PLA. To make the holder more stable, you can add lead shot to the base during the print. Note: I…
The Bit holder will be secured with a small magnet (d 4 x 3) https://products.wera.de/de/werkzeuge_fuer_fahrraeder_und_e-bikes_tool-check_plus.html
This loop is specifically tailored for a 20 mm wide and 1 mm thick nylon strap. If you need a loop for different strap sizes, no worries – just drop a comment or contact me directly, and I'll work on a design that fits your needs. For the…
During the hot summer months, the Fritzbox tends to experience a decrease in performance due to overheating. To prevent this issue, I have designed a sleek stand equipped with a holder for a USB fan (40x40x10) for active cooling. Printed…
Dieser Bit-Halter erweitert das WERA Tool-Check PLUS mit 5/32 Zoll Bits. Ein Adapter ¼ auf 5/32 gibt es hier: https://www.amazon.de/dp/B07VQV7WHD?ref_=cm_sw_r_cp_ud_dp_T1_Q6JWW258ZNTDAM6QQRMM Die Aufnahme für den Adapter gibt es hier:…
Bike stand to load your bike into car trunk by removing the front wheel. Depending on your driving style you need to secure your bike ;) In addition, you need: 3 x M6 Screws and aluminum profile 30 x 30mm with variable length. I printed…
First version of the SHAVENT Compact holder. Printed with PLA with organic support. The PLA piece is a bit too light and needs a fixation in the bathroom. I solved it with double-sided adhesive tape. UPDATE: New version with base. Adding…
The Adapter connects SKS E.V.A. pump head on the Bosch EasyPump Printed with PETG, 0.15 layer height because of the fine threads The Inlay requires to be clued together with epoxy glue because of air-tightness. Do not forget to insert the…
I customized the Filler Spool Holder to fit it on the Tukkari Case for Prusa Mini. All parts do not need any support. Printed all parts with 30% Gyroid with Perimeters of 4. You need: 608 skate bearings e.g.…
The Coffee Comb is a simple yet effective tool for espresso enthusiasts. Designed to break up clumps and evenly distribute coffee grounds in the portafilter, it improves extraction consistency. The model is optimized for PLA printing and…
The cables always clatter against each other during rapid descents, which can be very annoying. To prevent this, I have designed an adjustable cable-routing. The cable-routing connects a hydraulic hose (5mm) with the outer Bowden hose g…
The wheel sensor clamp broke after nearly 3 years, making it difficult to change the battery without disassembling it from the spoke. This adapter solves that problem by giving the sensor a second chance at life, allowing it to be easily…
Refillable filter cartridge with activated carbon for CleanAir CA-807 model. Print instructions Additional parts 4x Screws M2, DIN 562 4x Squared Nuts M2, DIN 7991 (4 mm height) Activated carbon Slicing Printed with Layer 0.2 The filter…
The feeds are printed with 98A FLEX filament. The absorber under the Z Axis can be made more resistant by adding perimeter layers. I printed all the models with perimeter of 2 and Z axis with 3. For the MK3S, you don't need to print the…
Schraubensicherung für MagPed Magnetpedale: https://www.magped.com/ Da ich nun zum wiederholten Male die Schrauben (Hülsenschraube) meiner MagPed Pedale verloren habe, habe ich eine Schraubensicherung konstruiert, um die Schraube vor dem…
Tukkari Holder without drilling and gluing. The Holder is divided into two parts, the adapter for mounting within the Tukkari enclosure and the LED Profile Adapter. You need: 2 x M4 square nut 2 x M4 screw 4 x M3 countersunk screw 4 x M3…
For the Saeco coffee machine, there is an option on the left side to dispense hot water. However, the water stream is so powerful that it causes splashing. For this reason, I have designed a pressure reducer. This part fits over the…
Daysaver.fun multitool replacements caps No support required.
This holder is designed to securely fit the hose extension for the Miele HX1 vacuum cleaner. It functions as an insert that can be integrated into existing wall mounts and is easily installed using two M3 screws. The design is…
This holder is designed for the Philips S7000 electric shaver and is most likely also compatible with the S5000 series (not tested yet). The shaver rests horizontally in the holder, which makes it ideal for shelf storage or inside…
I didn't like the belt design of the Alpenhupe nylon tape mount; therefore, I designed a handlebar mount adapter. The mount adapter fits a diameter of 31.8 mm handlebar. You need M3 screw, nut, and a magnet (d5x3). Mount: PETG or ASA with…
The Cap covers the lens and the on/off switch. The caps are printed with FLEX/TPU filament (98A)
Ewald Schillig Sofa Fernbedienungsgehäuse zur Sitzweitenregulierung Print instructions Zusätzlich benötigte Teile 4x M3 Senkkopfschrauben Optional : 2x Neodym Magnete
These are all currently available results.
