P
PrintablesJohannes
M6 screw anchor into foam insulation
print with petg and use a drop of adhesive of your choice to combine a pair.
- Downloads
- 552
- Likes
- 64
- Rating
- 5
All models
Counting matching models…
P
PrintablesJohannes
Formuling Steering Wheel Center Piece
My 30 Years nicely stored Formuling Steering Wheel fell apart like Dracula in the Sunlight when i touched it. Then i consulted the Internet for an replacement …… Nope. All the centerpieces are torn, desintegrated and crumbled. I got a…
- Downloads
- 145
- Likes
- 4
- Rating
- 0
P
PrintablesJohannes
Acoustic Guitar Feedback Supressor Cover
A Feedback Supressor Cover, drawn for an 98mm Soundhole. The Border is 5mm so you can calculate for any Diameter. There is a circular Groove, add the shortest ordinary Rubberband you can find and the Assemby will fit as a Glove. Works as…
- Downloads
- 142
- Likes
- 26
- Rating
- 0
P
PrintablesJohannes
Fiamma Carry Bike Endcaps
best printed in petg, or if you like it better by any means in abs no rafts, 100% infill
- Downloads
- 74
- Likes
- 11
- Rating
- 0
P
PrintablesJohannes
90Ah LiFePo Cell Pack for Camper Vans replacing a Standard 75Ah Acidblock.
The Designs Goal was to to keep the Pack inside the Footprint of an Standard Acid Car Battery. Readymade Packs are always to tall to fit in one of the Batterystorages under the Front Seating of my VW T3. For the outer Framing use 10mm…
- Downloads
- 64
- Likes
- 17
- Rating
- 0
P
PrintablesJohannes
Logitech Challenge Playseat Shifter Mount
print .stl in PETG and predict some minor corrections by melting the nuts hot into their cutouts before assembling.
- Downloads
- 49
- Likes
- 4
- Rating
- 0
P
PrintablesJohannes
XLR connector Marker-Rings Left - Right
PETG better than PLA for Flex. a Little support for the L and R cutouts can help. The Noname Pair is for the “Conrad” Type Budgetconnectors, slips over the Cablesleeve The other one for Neutrik-Connectors replacing the standard black Rings.
- Downloads
- 48
- Likes
- 16
- Rating
- 0
P
PrintablesJohannes
Dometic Cooler propritary 12v Power Plug replacement
print it and glue the wired cable lugs in place
- Downloads
- 41
- Likes
- 3
- Rating
- 0
P
PrintablesJohannes
Miele W1 Laugenpumpe Deckel Klappe Druckknopf 10852862 Lye Pump Cover Flap Push Button
PETG works best. 2-3 Layers, least infill is good.
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
PrintablesJohannes
NIX
NIX means "absolutely nothing" in Austrogerman slang. I was tired of Money-Giftboxes like envelopes, moneytrees and pirate treasure boxes. Throw it on the printerbed and feed it with PLA.
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesJohannes
Christmas X-Mas Dekoration
I filled it up with white/brown/dark Chocolate making an Christmas-Tag but its useful for Table/Window/Treebranch Decoration as well. Use of “Borders” and a clean Printsurface prevents movement of the thin walls while Printing. IF u use…
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesJohannes
Lid Handle for a Homemade BurgerCover.
Fits on IKEA “BLANDA BLANK”, just give it a 3-4mm drill through the Center and use a short (10-15mm) Woodscrew for assembling. Can probably replace any Lid Handle in the Kitchen. I used PETG and have no Temerature issues in use. Infill…
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesJohannes
Bare Lamp Socket Pimp
Works with cableoutlets in Drywalls. I made it 2 diameters, 60 and 80 mm. Unscrew the Bulb, sleeve the Pimp over the bare Lamp Holder, refit the Bulb and stuff the excess back into the drywall backyard.
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
PrintablesJohannes
Der ZUZ / The 0,5l Can to Bottleneck Converter
Snaps snug on EuroCans 0,5 Liter. 3mf with imprint “Der ZUZ”, stl without. Print in whatever you want to get in contact with your drink. PLA may be too stiff unfortunately. 25% Infill, no raft, no brim. Take care of a precise calibration.…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesJohannes
PV-Clamp on Wallprojection
I love the Idea having a Micro PV Power Plant of my own. Its made for 1035 wide PV Panels with a 30/30mm frame. For this Mounting solution you need a 12mm threaded rod, 2 washers and 2 M12 Nuts. (red part in the drawing) For 1035 wide…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesJohannes
Operating Light Cover
My Toaster Ovens Operating Light Cover broke. Hole Diameter is roundabout 12 mm/0,5 inch Classic "no Spare Parts needed" print. Support on the courved Faceside is mandatory. Would be a smoother finish with SLA … Use PETG when the…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesJohannes
IKEA Floorlamp Fix
IKEA Floorlamps tend to fail on both ends of their broomstick. In case you managed not to break the lampcover when the broomstick gets loose you have 2 of 3 options here. Both printed in PETG for flex and ruggedness. Add a big washer to…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesJohannes
Just another Flower Pot / veggie trash bin
You shopped a cup of sprouts. Drawing an waterproof Insert for the cardbord cup is the logic next step. Isnt it? A 3D Printomaniac isnt true without drawing at least one flowerpot. This one reinforces the cardboard cup becoming a…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesJohannes
Bed Shoes or Bed Slippers
If you ever need to move your Guest Bed alone. Cant resolve the Pain while lifting it in a upright Position but keeps Slippingpads im Place when moving the Bed across the Livingspace IF there is a smooth Flooring and a Bedframewith of…
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
PrintablesJohannes
Doorhandlecover
It prevents contact between the edge of an 20mm Doorhandle and any surface. Flat contact is at minus 30 Degrees doorswing. Print in anything you want, 2-3 layers perimeter and 5 to 15% infill is sufficient and does some flex to the make.
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesJohannes
Handcranked Coffeegrinder Filler Funnel and Powder Tamper
Funnel is for crankhandled Coffeegrinder with flat Top. Stamp fits theoretically each Coffeepowder portafilter. Maybe the Stamp .stl needs to be scaled to your Coffetrays inner Diameter in the Slicer. Amount of Infill doesent really…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesJohannes
Curtain track plug for metal rails
print it upright 2 times, petg is best use
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesJohannes
Coffeegrinder Crankhandle Bushing
Fixes the selfdestroying selfunscrewing ever wobbly crankhandle on my manual coffeegrinder by adding an outer bushing to build up withstand against screw-loosen lateral force. PLA is great for sturdiness, 04 Nozzle, 0.20 Layer, 5% Infill,…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesJohannes
IKEA Godmorgon Tile Spacer, General IKEA Wallmount-Spacer
Hangerspacer is for 12mm gaps to mount the wallmounted furniture right. I made the General Round Spacer in 12 an 35 mm. Cut it down in the slicer to reduce height to your needs.
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesJohannes
Pinprotector for Gigbags
Cheap Gigbags suffer often weak padding and webbing. One of these weak points is the bottom part where the Strap-Pin likes to work out an unwanted airvent. this simple part equals the pin height and prevents unwanted damage from the pin…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
These are all currently available results.