P
PrintablesScott Lomas
One up components edc tap case
A two part case to keep your one up steerer tube threading tool kit organized.
- Downloads
- 32
- Likes
- 5
- Rating
- 5
All models
Counting matching models…
P
Printables
One up components edc tap case
A two part case to keep your one up steerer tube threading tool kit organized.
P
Printables
KAC MP5 RAS Style T1/2 Mount
I made the railed version first and thought it might be cool to do an Aimpoint T1/2 footprint version (a bit like the real 30mm Aimpoint mounts KAC made) so I designed my own. Designed to fit on the VFC KAC MP5 rail fitted to a WE MP5,…
P
Printables
Burley Tail Wagon water bottle cage mount.
You'll need 2x M5 Nuts 2x M5x10 bolts (the kind you'd use for a bottle cage) 2x 4.8mm wide zip ties Print with organic supports. Press the two nuts into the nut cages put your water bottle cage on with the bolts, and it will just clip…
P
Printables
Hexagon MOLLE Panels
Three sizes of hexagon MOLLE panels are available. Originally designed to fit inside a backpack, they can also be used for other purposes. Small: 9.6” x 11.9” Medium: 9.6” x 14.1” Large: 10.9” x 14.1” Print Settings: Rafts: No Supports:…
P
Printables
Paintball Caddy Lid
I made this lid because I lost the stock one, this one is made out of TPU so it is flexible and works just like the stock one or even better, because TPU is stronger.
P
Printables
Fidlock Twist Magnetic Bike Base - 13x2.5mm magnets - Remix
Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…
P
Printables
MCXish folding brace with extra beef
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
P
Printables
OneUp V3 Dropper Post Upper Bushing
OneUp V3 Dropper Upper Bushing replacement part. Printed with PETG, brim and 0.15 layer height.
P
Printables
m4/ar15 KIT suppressor and stock (airsoft silencer/barrel cover)
Silencer for barrel cover and stock for m4/ar15 created by me. Silencer for m14 ccw thread, must be enlarged in X and Y axis by 2% so that the fit is correct. I used m3 imbus screws with a length of 20mm.
P
Printables
V6 Can Cooler (Air cooled and standard heads)
A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…
P
Printables
IS-PM adapter for Kickbike scooters (fitment)
This includes 3 adapters to mount a PM disc brake caliper onto your Kickbike frame using the pre-installed IS mounting holes, which are in a non-standard position. All made for the upper wheel mounting position. Included - 160mm, 180mm…
P
Printables
5 Inch Boat Deck Plate
Printed these upside down using 0.4 mm nozzle with PETG and PLA. The (TPU) seal goes in the lid. Use a 5" hole saw to install. Added cover with webbing for installation require higher weight load. Added blank cover with no finger holds.
P
Printables
Helmet Hanger
A simple helmet hanger. I wanted to hang my motorcycle helmets from the back, no dust ends up inside the helmet. To be held by 1 screw with a diameter below 4mm. Enjoy!!
P
Printables
Begadi Airsoft Grenade Bumper / Protector
I recently bought an airsoft grenade from Begadi and even though the shells are relatively cheap to replace I wanted to protect them a little. The caps are designed to friction fit - which they do really well. If your printer is not as…
P
Printables
Handlebar Plugs Dual Color/Material
Give some extra color to your bike with these dual color handlebar plugs. These plugs have total diameter of 32mm so they match better with lock on or really thick grips. Thanks to Single - Extruder Dual - Color technique, you don't need…
P
Printables
Ortlieb Clip for bicycle bags.
This is a replacement clip for an Ortlieb bag. Print with ABS or PETG at .2mm with supports. Perfect fit with satisfying click when closing.
P
Printables
Fly Fishing Rod Reel Seat
Don't let a broken reel seat ruin your fishing day. Replace your broken (or just boring) reel seat with this 3D printed replacement. Installation instructions Remove the reel from your fly rod Unscrew and remove the existing reel seat…
P
Printables
VZ.61 Off the Top of my Rail
Full Top Rail 0.2 Layer Height 99% Infill Supports Yes M5x30mm and M5 Nut needed for Front M5x16mm and M5 Nut need for Top Rail to Rear Rail Attachment. 2 Screws needed for Rear end Receiver (Metric or Standard Depending on…
P
Printables
Fenix HM65R and similar helmetmount
Fenix HM65R helmetmount Print with PETG Can be mounted with zipties or doublesided tape
P
Printables
Baseball Bat Stand
i mad this so the batt nexed to my bed would not roll around. if to small scale up.
P
Printables
Cynthia Plunger Rod for K26 spring
I remodeled the original plunger rod, to solve catching issues with my K26 spring. It has a slightly bigger notch.
P
Printables
Tennessee Vols coasters and holder for MMU
Merge the inner and outer in your slicer. I printed the holder on my FLSUN V400 to save some time. Made for 7 coasters but could easily be adjusted for any amount. Let me know if you want a different number.
P
Printables
Spot Hogg Fast Eddie scope ring
I designed this scope ring to increase the focus area of the Fast Eddie scope housing Mainly aimed at long range 3D archery The ring snap into place without any force I made two versions of the depending of preference Printer setting…
P
Printables
saddle rail gopro mount
Testing. Gopro mount for saddle rail. 7mm round and 7x9mm oval rail. I modeled this to mount CO2 cartridge under the saddle. 1x M3 OD5mm heat insert 1x M3 bolt 10~12mm 1x M5 bolt 16~18mm 1x M5 nut
P
Printables
Clip Stick head for Avalanche probe
Print on PETG tap the hole with a M5 Tap so you can use the go-pro screw
P
Printables
rockshox shock pump handle holder
This is a clip for rockshox shock pump handle. TO install it, you only need a ziptie to hold it in place.
P
Printables
Slope Angle Factor Gauge
A Slope Angle Factor Gauge that attaches to a rifle and displays the Slope Angle Factor based on the elevation/depression angle of the firearm. It requires one (1) M4 nut, one (1) M4 washer, four (4) M6 nuts, four (4) M2x6 flat or pan…
P
Printables
Wolf Airgun Target
A replaceable wolf target that snaps into a base. Holes in the base are fully through, so you can push out the broken plastic!
P
Printables
Reloading Brass Case Seperator Trays
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
P
Printables
Happy Gilmore Putter
Have you ever wanted to Have the Happy Gilmore Putter but don't want to pay thousands of dollars to get it used? Well do I have a solution for you, here is the real life Happy Gilmore Putter that is scaled up properly to the REAL SIZE and…
P
Printables
washer for rowing oarlock
clips for height adjustment of oarlock hight, model based on standart product from empacher, best works if you use 4 perimetres and 20% infill (with prusamet, may be different for another filament, so upload makes with your experience…
P
Printables
Bicycle Spacer for Ride Shotgun Pro Seat
Hi Guys, I created a spacer for the Shotgun Pro Seat. It works with every bike that has the Acros Cable intergration through the Headtube. Just directly put the Shotgun Spacer Cable directly onto the Top Cap, where the cables are coming…
P
Printables
Desiccant box for ammo box
Scaled down version of original desiccant box small enough to fit inside of popular Plano ammo box lid . Used velcro to affix to lid, does not interfere with ammo or takes up any usable space . No longer have to drop desiccant baggies…
P
Printables
![Rollerski (Skiroller) and poles carry holder [OpenSCAD]](https://media.printables.com/media/prints/1067432/images/8075867_116facf1-d862-494a-a027-1216254b6951_ff1b5bc4-f6d3-4edc-90fa-da83c27c6821/photo_3_2024-11-08_16-18-26.jpg)
Rollerski (Skiroller) and poles carry holder [OpenSCAD]
Rollerski and poles carry holder. Securely holds everything in place while you travel to the ride via any menas of transport or by walking. Easily adaptable to particular rollerskis thanks to OpenSCAD source. Simply adjust parameters in…
P
Printables
Wave Soccer Trophy
Just a wave soccer trophy. I give it a C-. Barely passing for my purposes.
P
Printables
Klickfix bike rack
Bike front rack compatible with Klickfix Recommended to print with ASA or ABS. So far doing some stress test it support 4-5 KG in movement. (was used in regular off-road terrain)
P
Printables
Kayak pedal drive storage solution
So I needed a storage solution for my kayak pedal drive. It is a knock off chineese hobie mirage flap pedal drive. I have Gladiator geartrack slat wall. I designed a storage rack for it. I still havent found a print orientation I like. I…
P
Printables
partisan-7 BL, H, SF, parts add on set
10-08-2025 M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt ------------- 26-01-2025 3DN7 bolt and nozzle set added --- 13-11-2024 AAP01 barrel adapters parts have been added for now all file options have been…
P
Printables
Head lamp battery holder
This grip allows to attach battery for headlamp. Grip has been primarily targeted for this headlamp: https://www.kolo-park.cz/obchod/prislusenstvi-1/svetla-a-blikacky/predni-1/predni-svetlo-max1-power-led-20w-1500lm-detail…
P
Printables
Motorola T600 Walkie Talkie Wall mount
I created this wall mount for the Motorola T600 set that I picked up at Costco. This version includes screw holes that fit an M4 screw or similar and a separate model that is designed for Command strips (small).
P
Printables
Rear bike light mount for Old Man Mountain racks
The Old Man Mountain bicycle racks have holes for presumably mounting lights; they are each ¼" in diameter, set 1" apart (center to center). This mount has a nubbin that protrudes down into one of the holes, then relies on a ¼" bolt to…
P
Printables
Marine Cooler Mounting Bracket. Works with Igloo Marine Series Coolers.
Bracket you can use to mount your cooler to your boat.
P
Printables
Bicycle saddle height measurement tool - "75mm point" remix of cmh's 80mm version
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
P
Printables
Combined Picatinny Riser
It uses M4 bolts and length depends of what you mount it to. I've used 18mm ones. I would appreciate any ideas from you on what I can make. Still new to the 3d modeling and trying to improve, so I'm up for a challenge.
P
Printables
Water Bladder Dryer
I found that after using my water bladder in my hydration pack that it remained wet inside for an extended period of time. I tried a few of the inserts that hold the bladder open but it still remained wet after many days. This print uses…
P
Printables
ETAP 22/23 (i/il) scepter cap / railing top adapter
Railing support 25 mm top adapter. Print in ASA for UV resistance. Sand and smoothen the top with acetone, if needed. Use 5+ walls for strength. For a clean top, print as is, with supports. Print outer walls first (or vv) to reduce outer…
P
Printables
Paintball Freak XL Insert Case
Freak XL insert case. Fits four inserts. Uses eight 6X3 mm magnets to hold the lid on. Use a little bit of super glue to hold the magnets in. They should be snug, but not hard to push in. They are not meant to be friction fit. I used ABS,…
P
Printables
Bikepacking bottle cage and cargo mount for Tubing Multiple sizes
A simple bracket that with some zip ties and tape can seccurly add an m5 mounting point to any round tubing. Origionaly designed to put water bottle cages on my fork they have been usefull elsewhere on the bike as well including on my…
P
Printables
WAHOO RPM SPEED Sensor Mount
A replacement zip tie mounted TPU case for WAHOO RPM SPEED sensors
P
Printables
Wrist watch strap retainer clip
v2: wider top to prevent accidental unfastening This clip is both small and large enough not to fall out of the watch holes during everyday use. Very simple flat printing with normal supports is pure pleasure. Enjoy! If you would like to…
P
Printables
6.5 Grendel - Ammo Case Insert - Apache 1800
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is an insert (and corresponding lid badge) to build a 100 round weatherproof ammo case out of Harbor Freight's…
P
Printables
Enduro bike lower link guard
Designed a lower link guard for mu huskey. I made it to fit the holes in my skid plate, you can download a version with no holes and make it yourself.
P
Printables
Rock Climbing Hang Board Training
Hang board for use for portable training or your own home gym. I used 1100 paracord for the loop but you can use 550 cord as well. Feel free to adjust the size to suit you. I would recommend putting some kind of fuzzy skin on there to add…
P
Printables
Rogue-6: Ar-15 buffer tube
26-12-2024 R6 buttstocks have a cutout added for the upper piece __________ a Ar-15 butt stock option that can be printed and used like you would expect
P
Printables
Better Quiver Protectors for Karakoram Bindings
Protect your board's base when stacked for travel with other Quiver Connector and/or Ride Mode mounted boards. These quiver protectors are much more durable than the stock Karakoram foam quiver protectors. They are made from a durable…
P
Printables
Deuter backpack "Gigant" chest belt male buckle replacement
english Replaces the broken snapper of the Deuter backpack “Gigant” Recommended thickness: 0.1 mm - 0.15mm Perimeter: 3 Infill: 40 - 60 Material: PETG Fusion 360 file included Update 2026-feb-01 Over time, it has become apparent that the…
P
Printables
BISPORT klíčenka
keychain from bisport, bisport is a canoe rent company from Sázava river klíčenka bisportu (půjčovná lodí na řece Sázavě)
P
Printables
Garmin Edge handlebar mount MTB
Mount for garmin edge devices that clamps on to 35mm handlebars and sits in the middle over the stem. Very durable and won't rotate or break even on the roughest downhill tracks. The top clamp (blue in the photo) is designed to break in a…
P
Printables
chainstay protector Trek Remedy TPU
Chainstay protector that perfectly fits the contours of the Trek Remedy. Might fit other frames like the older Slash too but i haven't tested. I had problems with the chain damaging the frame on the inside of the chainstays. This solves…
P
Printables
Praxis Girder crank protector TPU
Protector for Praxis Girder carbon cranks. Same dimensions as the original one. Print in TPU
P
Printables
Champion Skeet Thrower Remote Cover TPU
This is a wireless remote cover the champion whirlybird skeet thrower. The cover is mainly to give the remote a lanyard hole so the remote can hang from your neck or belt. Printed with TPU using 5% infill for softness.
P
Printables
Knife Sheath For Paring Knife
I made a knife sheath for a friend who's into fishing. I didn't model the knife sheath exactly to the size of the blade, so there is some slight wiggle room, but it's otherwise nice and tight on the base when the sheath goes over the…
P
Printables
Worker Kunlun Safety Delete
Install it with the side with the thicker “wall” on the right side of the blaster
P
Printables
Exercise wheel to strengthen abdominal muscles
Exercise wheel to strengthen abdominal muscles
P
Printables
Tesco Green Box Topeak Quick Track Adatper
Do you have a tesco crate box hanging around that is not finding any use? Do you ALSO have a bike with a topeak pannier rack on? Well do I have news for you my friend, with this nifty device you can turn your old green box into your BRAND…
P
Printables
Ribbed Fishing Lure
Required for assembly: 4 x 6 mm lead split shot 3 x screw eyes or twist wires. Super Glue Clear coat, I use C&W lure epoxy or UV resin, you can also get a spray can of varnish and give it a couple of coats. Without a clear coat, water…
P
Printables
Lezyne Zecto Front 250 Gopro mount
Hi, I wanted to share this Adapter to mount your Zecto Front 250 on a Gopro adapter mainly to mount it under your bike computer mount like barfly in my case (see pictures). Sorry, the rough/raw design, not optimized nor aero but…
P
Printables
Ladder support for tender WIlliams 280
this support often breaks, and i had to fine-tune many details to achieve a satisfactory result: this is the last iteration! i suggest to print it with 100% infill and PC material for higher durability and better elastic performances at…
P
Printables
AR-15 Straight Trigger Guard
This was modeled specifically to the Zev Technologies lower receiver, but it should fit most brands. Holes are designed to fit M3 screws.
P
Printables
Livewater sports L2 hull bumper/guard
I printed this in ABS for durability in the summer heat at 100% infill. This part goes to the right keel of the paddleboard. Flip it on the slicer to get the one for the left keel.
P
Printables
Knuckle Dusters
👊 Sleek and Functional Knuckle Dusters Design 👊 🔹 Ergonomic Dimensions : Designed to fit comfortably in the hand with a natural grip. 🔹 Design Highlights : Smooth, rounded edges for a modern and polished look. Lightweight structure ideal…
P
Printables
Bell sanction 2 chin mount.
First ever chin mount model for the Bell sanction 2 !!EVER!! Print 100% infill, with supports everywhere but the hole for ziptie. Stick on with 3m doublesided tape + a ziptie. (if you break your cam pls dont sue me☹ and if you want to do…
P
Printables
Mud guard bicycle
Preferred printing material: PETG Assembly Instructions Mounting the Printed Parts to the Bicycle Seatpost : Components Needed : 3D-printed holder and mudguard components. Screws (5 mm diameter or less, preferably stainless steel for…
P
Printables
Singing Rock Crampons cover
Three piece crampons cover for Singing Rock Fakir III. Printed with TPU filament.
P
Printables
MacDaddy 2.0 Grip Shiv
I noticed that mil-spec grips were a little loose on the MacDaddy 2.0 platform. This had caused my lower receiver to crack around the trigger guard. The grip receiver on the MacDaddy 2.0 (photo 1) seems to be a bit thinner than mil-spec…
P
Printables
Riot Mako Kayak storage removal mechanism
I really didn't like how the 2 small front compartments would hold water in the depressions. To dry these you have to remove the screw and hold the nut internally and reinstall after. I designed and 3d printed a resolution. These are a…
P
Printables
Ortlieb QL2.1 hook insert
Motivation I wasn't entirely satisfied with the fit of this one by crashoverride after being printed in Grey Pro & I think Durable resin on a Form 3 – it would fall out maybe 1 of 30 rides OEM parts cost money Rev 1 was a modification of…
P
Printables
Case for Petzl Core
To reduce the chances of forgetting the spare Petzl Core in the pocket of my running shorts and having it ultimately end up in the washing machine, I've designed this little case that can be attached to all sorts of things – for example,…
P
Printables
BRS 3000T storage for Toaks 750ml pots
A simple storage container for the popular BRS 3000 burner to be stored underneath a 100g gas canister inside of the Toaks 750ml pot. The compartments on the sides could be used for storing other small items. There is still room at the…
P
Printables
Adapter, Uplula, Bodyguard 2.0
Fills in the empty space in front and on the sides of the 9mm - 45 ACP Uplula Magazine loader when loading S&W Bodyguard 2.0 mags. Allows for easier loading.
P
Printables
Skateboard floor stand.
Made of PLA, and designed with interior holes to fill with aquarium sand or other material to give weight and consistency to the support. It's important to scale and adjust the skateboard to your needs. There are many models and sizes.
P
Printables
Sonos Roam Speaker Magnetic Holder
Attach a Sonos Roam speaker to a wall (or golf cart) with a powerful bar magnet. Recommended Material I recommend printing with a heat-resistant material, like PETG , if you intend to store it in warm places, like a car on a sunny day.…
P
Printables
Puget Sound Dungeness Crab Measuring Tool
6.25" Gage for measuring Dungeness crab in Puget Sound. For those printing with the BambuLab AMS or similar units, print profiles with the color changes incorporated are found on my Maker World here:…
P
Printables
Replacement Deep 6 Diver
This is a replacement for a size 2 deep six diver. My last one broke and they are very hard to find in local stores so I reverse engineered it and put the printed one together with all the hardware from the broken one, except the rear…
P
Printables
Dust Cap for Happijack 4160 Camper Jack
I lost a cap off my camper jacks and the other 3 were old and cracked. OEM replacement caps are over $8 each so I designed this cap for a replacement. Just print it and snap it in place. Be sure to check out my profile for more of my…
P
Printables
SlingCraw 3,5'' - Injection Fishing Mold
SlingCraw da 3.5'' pollici è un'esca pensata per la pesca al bass, molto versatile e da potersi utilizzare con molteplici inneschi. La mold bivalva a iniezione è realizzata in 2 parti da unire tramite delle viti filettate di diametro 5mm.…
P
Printables
Speed loaders for 9mm Mossberg
Speed loaders for Mossberg MC2 and MC1 9mm handguns. The MC2 loader is somewhat of a snug fit which made things easier for me. If you want a looser fit you may want to scale it up 1-2%. I have confirmed that the MC1 loader is also…
P
Printables
Sonos Roam Speaker Bike Mount Remix
For music lovers on the go - a perfect fit for the Sonos Roam portable speaker - this custom mount lets you attach your speaker to the “bottle cage” of your bicycle. This is a remix of the great design Sonos Roam Bicycle “Bottle Cage”…