Airbrush stencile ST-CAM003-giraffe-camo-WWII-paint-hobby-stencil
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
- Downloads
- 914
- Likes
- 200
- Rating
- 5
622 models
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
I designed an almost identical spare wheel for the rear of my Makita cordless lawn mower - more stable than the original because the soft struts are no longer needed! The original hubcap can still be used. A further improvement in driving…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Replacement for Singer - second spool pin holder (vertical auxiliary spool pin) #68003702 . Printed with PLA and I used supports.
About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…
Driven by François Cevert in the 1971 Grand Prix season. Cevert finished 3rd in the championship with four podium finishes and one win at the US grand Prix.
Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…
[ IMPORTANT in order for this part to fit, you have to scale it from 100% to 10 % ] This is a spare part for upper basket rear stop, which you can use instead original part, it's cheaper and faster to print, PLA under a dishwasher…
VW Sharan I front seats railing replacement spacers / sliders. Modeled them as close to the original as possible, however I found that they are a tad too loose. They work great, there is just a little more play, you may consider printing…
HELLO I present to you the articulated snake 003 a snake with a scale style ideal for decorating your desk here you will find two files an STL and a 3mf for multicolour printing (For personal, non-commercial use only. See copyright.)…
Pokemon - cookie cutter set 003 The file is about 60 mm tall and can cut up to 8 mm dough and can be printed with a 0,4 mm nozel and 0,2 layer height. Its a 2 piece item, one for cutting the cookie dough and one for modeling . Best to…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
This model is compatible with the lego system.
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I searched (and searched and searched) for a laptop stand to meet my needs, but…
Quick 3D model of TIV 1 I made 3D Printable, the mesonet is removeable so if you want it or not.
Modèle réalisé sans angle supérieurs à 45° permettant un impression sans support.
This part prints with PETG better than PLA but both will work. PETG seems to stick to the build plate better. You will need 5ea 2-56 Socket Head Cap Screw 3/8" long. It also reuses the screw from the old case but it will not hold the case…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Behr paints claims that their new spout that comes free with my paint purchase…
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…
All credit to the modeller at the 3DWarehouse https://3dwarehouse.sketchup.com/model.html?id=57a7a9e163e8f087fe11eeaa72c8aa36 I was fortunate enough to have owned one of the fantastic bikes back in 2004. I may have to have a crack at…
This is a work in progress, but to make the digitigrade legs, you need an extra forearm piece to put on the bottom of the legs. I aim to make the four arms better than just the hips on the arm sockets like the official model. I really…
Wall mount for Makita DCL286/CL003. STL file is already set for best orientation. Use a tiny bit of support for the first few layers. Use 0.2mm layers on a 0.6mm nozzle, or 0.15 on a 0.4mm nozzle.
Replacement side latch for Stanley rolling workshop / toolbox. Stanley part number: 19500300 It fits my Stanley STST18631 toolbox and other models as well. I printed in PLA with 15% infill. As of May 2025 it has held for ~3 years and is…
I modified an existing Honda door rod clip design (shout out to @akf_was_here ) to work on my 2004 Accord. I made the clips just a little more robust to help avoid snapping upon installation, made the hole a tad bigger, and scaled all…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Thanks to @PhabulousPhantom's kit cards, my son and I are having fun making…
UPDATE Nov 01, 2021 I've had issues trying to print these with PETG. I've changed the cylinder and piston to be oval so there is less overhang in the clearance area between them UPDATE - Feb 24, 2021 Uploaded a V2 version with more…
The distance between the screw holes is 80 mm. Screws should be 3,5 - 4 mm in width. FreeCAD file is included for customization. According to comments it fits some 18 V models like the XLC11 as well. Print info Filament: Generic PLA…
What is this? This is an enclosure designed to house an ESP32 board (specifically, an ESP32 DevKit V1 board), a PMS5003 sensor, and a DHT22 temperature/humidity sensor. It's powered through the ESP32's micro USB port, which is exposed on…
This is a direct replacement for the Wedco 84003 gas can vent cap. The thread pitch is 3mm and the other diameter of the male threads is approx 22mm. The plain cap should be printed with it's top touching the build surface and no…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is the 4th rendition of my locking carabiner. This one is bigger, more…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
Tool holder for Power Bits 40pcs with Connectors. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 152,59mm W - 101,00mm H -…
UPDATE: Added a top antenna version. Commercial Use and Attribution Notice: Alley Chat DroNode © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling…
I resized this to fit the 2003 mini cooper base cup holders Print instructions Designed to fit 2003 mini cooper cup holders for larger drinks (McDonalds)
3D Model of XCE & XFE Dimensions: L-214mm, W -87,36mm, H -74mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX machen and part of the Discover. Create.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
As I had one knob as a reference it was not so hard to model one. The friend liked it so much that he replaced a second one also to make them even. It was a quick and dirty design, so it requires supports at the bottom (I would consider…
C'est un cache ampoule de plafonnier pour Twingo1 phase 2. Je l'ai imprimé en PTEG avec remplissage à 100%. Category: Replacement Parts
First version was very lightweight, also easy to install. This version more strong and more crush ready. Also some different design v002 and v003 difference only arms holes, v003 much wider to fits more arms variations. This is an…
A simple offset board for the ULN2003A (green) motor driver boards that are available on AliExpress. I connect the board with 4G x 6mm self-tapping screws and then super glue in place on models as needed.
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Recently I found myself singing: “I fought the saw and the..saw won. I fought the…
This is a simple case for the rakwireless RAK19003 Mini Base Board to, in combination with the RAK4631 or RAK113100 Core Modules, create a very simple USB connected Meshtastic node. My goal here was to create the most minimalist case I…
This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…
Low poly Venusaur, the final evolution of Bulbasaur. A powerful Grass/Poison Pokémon in a geometric 3D style.
A mount for a servo on an 8020 series 10 extrusion. Print instructions Unassociated tags: Series 10, servo mount Category: Electronics
Remake of the G-Shock DW003 Bezel Ring as replacement part (not original)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Check out my Amazon Page to see what kind of gear I use to make these models! Did you lose the truss rod cover for your Rickenbacker bass guitar? Print another one!
This is a treble pickup bezel to fit Rickenbacker 4003 basses. It may fit other models like the 4003S but I can’t physically try this to confirm. The Rickenbacker 4003 treble pickup cover may look cool and authentic, but it won’t be long…
This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…
This model is compatible with the lego system.
I really enjoyed @PhabulusPhantom's kit cards for my kids and wanted to add some improvements to this F-15e model to help it fit together better (and stay together as they play with it). I added tab and notch features to the mating parts…
Keep your cutting boards upright, organized, and dry with this functional kitchen accessory. Designed to hold up to six boards of different sizes, it prevents them from tipping over while keeping airflow between them for faster drying. A…
ULN2003 Driver. Fichier .step avec le plan pour pouvoir l'ajouter à vos assemblages.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200mm sp. 3mm
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Repair gear for rear wiper motor part number 98700-3e000 987003E000 For cars Kia Sorento Hyundai SantaFe 88 teeth 53.6(7) mm diameter 10mm central shaft hole 7mm side shaft hole 5.45 angle
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** As 3D printing enthusiasts, we often use long and slender tools for our needs, but…
I provide the full model of the Audi a3 8p (2003-2005) with double frame front bumper, with realistic measurements. This is to open in FUSION 360 software so you can get the complete model.
Adapter mount to install RAK Wireless 19003 mini baseboard to enclosure with 5mm grid hole pattern. Also includes adapter for 2000mah flat pack battery and Waveshare solar controller (D version). The onboard solar charging on the RAK…
fits my 4,7 magnum tristar from 03
COMMERCIAL LICENSE FULL COLLECTION PRINT INSTRUCTIONS • 8-15% infill. • 6 top layers. • 2-3 outer walls. • Scale to desired height. • Supports not used. MODERN MACHINE© STL files are strictly for personal use. Unauthorized resale of these…
A case for storing a 9003/H4 bulb Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.1 Infill: Doesn't Matter Filament: Spool3D PLA Category: Automotive
Air vent shims designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. To install, pull up on the vents then outwards until they come out, then slot into the recess on the side of the air vent. After…
After (my wife) dropped the key to the 2003 Lexus ES300 one too many times, the key/fob housing broke beyond repair. This is a replacement housing. It turns out that the shape of the main key and the spare key is different at the housing…
Thumb rest for Rickenbacker 4003 (Recent models 2014-2017) that fits without the need for any modification to the bass. There is a standard version or a bevelled version. You can choose whichever you prefer. The bevelled version does give…
This is a 3D-printable bearing modeled after the 6003 size standard: Inner diameter: 17 mm Outer diameter: 33 mm Width: 5 mm It is ideal for testing clearances, tolerances, or building functional mechanical systems in DIY projects,…
Replacement model for part described below: GE OEM Part Number WB03K10035 Range Oven Stove Burner Knob Made of Plastic. Has a D shaped stem Number printed on back of it is 183D5598 This fits specific GE manufactured range models…
Pot de fleur auto arrosant, pour plantes intérieur. Imprimable en 3 parties, l'ensemble fait 16cm de haut.
Design Concept The design draws inspiration from intricate floral patterns, adding elegance and sophistication to attire. Usage These earrings are perfect for formal occasions, parties, or as a stylish accessory in everyday fashion.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
UPDATE again again: loaded updated 1:12 and 1:6 versions with improved barrel lines as they weren't very visible in small scale. I also thickened the sights too. Check the file list for "revision2" files. UPDATE again: loaded rescaled…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a weatherproof (or waterproof depending on the version) case for a RAK19003 based Meshtatic node. Since the RAK19003 includes a Li-ion charging circuit and solar panel input port, the cases have room for a 2000mAh Li-ion battery…
🖨 RECOMMENDED PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Suitable for volvo xc90. I have installed the one to my car in place of broken LH 1882 & RH 1882 part. On the picture is the draft part to check the suitability on place. I'll print the proper color later.
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
An attachment angle for my car broke so I created a replacement in CAD. For the unlikely case that anyone is searching for a replacement of this part, I put it here. It's the part that connects the center console panel to the tunnel…
This model is a remix of my original quick overhang test. This time it tests the overhang performance of all 4 sides at once. For a quicker print, I only kept the angles 45-70deg. If your printer can manage 70deg overhang on all 4 sides,…
ULN2003 5V Stepper Motor place holder include fusion 360 file for insert part shortened wire just for visual
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Model available on TinkerCad https://www.tinkercad.com/things/dUaTiFHWh74
Wanted to hide skimmer screws, but there's no cheap shop nearby selling the cover. Also hate when there are water toys blocking skimmer flap, so I made cover for Hecht 30003 skimmer with grid (big enough for leafs). This grid will block…
For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…
Snug-fitting cup and phone holder liners designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. I am aware the top rounded corners of the phone holder liner doesn't quite match the car's corner…