Handle 120mm
Screw distance 120 mm Screw size M5
- Downloads
- 460
- Likes
- 48
- Rating
- 5
1,973 models
After years of trying to avoid solder fumes I found it time to design and print my own extractor arrangement. Initially the idea was to produce a desktop located unit, but due to space restrictions and consequent positioning issues, I…
This is a mash up remix of StanleyB's and reddaugherty's respective models. I personally need the extra safety precaution that the grill provides.
Adapter duct to attach a 120mm fan to 3 inch duct. Made this to use dual 120mm fans on my simrig for movement simulation.
I wasn't satisfied with the other 3D printable designs out there for a 120mm PC fan based soldering station fume extractor fan. I felt they'd take too long to print and/or use too much plastic. Thus, I decided to leverage some of the…
I just needed a simple fan hood for my 120mm Noctua that could be printed on my Prusa Mini. It's 175mmx175mm in outer dimensions, 75mm high. I've also added an adapter for other side for a flexible foil 4" duct, and a collar to clamp it…
120mm fan to 150mm ducting mount. Slots are provided for versatility and accept M3 hardware or M4 self-tapper. Regular 105mm hole spacing compatible. Printed in a MK4 in PETG with IS enabled.
I know “just buy the addon then”, but I like designing in Fusion and am a DIYer so I came up with my own solution for an air extractor / filter box for my Original Prusa Enclosure (OPE). What I already had on hand was a 120mm 12VDC fan…
Habe hier ein Modell gemacht um einen Abluftschlauch für eine Klimaanlage durch ein Plexiglas nach draußen zu führen. Die Plexiglas-Scheibe hat einen durchmesser von 4mm und wird von außen/innen vor dem Fenster mit Klebestreifen oder…
First time using fusion360, so there is a small gap I couldn't figure out, but prusa slicer fixes the gap. Fan from amazon: https://www.amazon.com/Wathai-Brushless-Cooling-Centrifugal-Airflow/dp/B08P1S5DBN The fan fits perfectly and does…
a simple fan duct designed for 120mm computer fans. This housing allows for ventilation through narrow slot type windows often found in high rise buildings. This is a great tool for removing smoke or fumes in a building with slot type…
This model was created to hold a 120mm axial fan and an ALVEO3D HEPA filter, which you can buy from the Prusa Eshop or the official ALVEO3D website . Important Note: A standard PC fan will not be sufficient! Only use this model if you…
The fan mount was designed to solve the issue of insufficient air conditioning and the need for cooling on hot days. Its minimalist design is all that's necessary for the fan to operate effectively. To secure the fan, you can use either…
This is a model I made for my telescope to protect the interior from dust and debris during transport. It is a 78mm Moonlite Focuser End Cap for Esprit 120mm Telescope but you can resize it for whatever telescope you may have.
I designed this Fanshroud to make my RTX2080 quieter. The Shroud lets you mount a 120mm Fan into the 90mm Fan mount. The Fanshroud screws into the existing Fanmount Per Shroud you'll need: M3x6mm Countersunk Screw x3 M3 Nut x3 (Optional)…
Compliment your rugged PC build with textured fan side clips. I used silk PLA to give a metalic effect. I have included models for 120mm and 140mm fans. Printing I used 0.15mm layers for a clean texture. 0.20mm would look similar and save…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
Custom-engineered for optimal performance-to-noise efficiency in use with the Noctua NF-A12x25 fan. Carefully optimised to ensure smooth pressure gradients as the fan blades pass the radial struts, resulting in higher airflow performance…
A fan grill for a 120mm PC fan. Designed in Fusion 360.
UPDATE 2024-05-29: Updated to V2. Added 140mm version and uploaded the source file. Parts to make a 120mm or 140mm PC cooling fan into a desk fan. A single M6x30 Hex bolt and M6 nut connect the fan to the stand. With an option to embed…
These fan spacers can be used for 120mm and 140mm computer fans. Both fan size spacers come in three thicknesses: 10mm, 15mm and 25mm. The mounting holes are chamfered on one side and recessed on the other. See the second image for the…
This is a fishing lure I have been designing and upgrading for a while now, it uses 6mm ball bearings for weight, stainless steel wire for line tie and rear hook hanger, and a swivel for belly hook hanger. Checkout LureForge , the…
UPDATE May25-2023: Added additional files for printing main canister portion on smaller printers. Split canister sections also have 3mm holes to help with alignment during assembly. This is a full sized printable model of an M829A1. The…
A 3D Printed Fan Cover / Mesh Filter. Prints out single straight lines criss crossing. See close up pictures. It is memorising to watch it being printed! Do a colour change on the first and second layers in your slicer to add a shimmering…
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
This is an adapter to connect a 120mm PC fan to a 4 inch duct/pipe/dryer hose. I know there are already models like this out there, but I always find something I wish was done a little differently, so here's mine. It has the following…
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
This is a cover for 120mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
A 120mm fan bracket for 3x 5.25 inch bays. It mounts with M3 screws just like an optical drive or other 5.25 inch bay accessories. This is a slightly refined version of https://www.thingiverse.com/thing:2446552 , with many dimensions…
All fans have 4.2mm screw holes and fit within the dimensions of a standard fan. Screw spacings are also standard. 80mm, 71.5 hole spacing 120mm, 105 hole spacing 140mm, 124.5 hole spacing The Hexagon pattern is 12mm hexagons side to…
Since I saw the model of NBA, I had the challenge of creating it myself, it was done through Fusion 360. It is a basketball which is not filled with air, has a hollowed design and comes in two sizes. The first file contains a 120mm…
This is a simple soldering fume extractor. It uses an active carbon filter commonly found in hardware stores and used also in your kitchen fume hood or in cat toilets. The design is quite simple, no need for screws or anything else. All…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 120mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
It's a Fan mount for 120x120x25mm fan that you screw in with standard fan screws. You can also print joints to add up a second 120mm FAN. That mount replace a 2x 92x92x8mm to a 120x120x25mm. It helped me to get 7C lower temperatures under…
Fan mount for passively cooled Nvidia Tesla K40 and P40 GPU's. designed to work with dual GPU's.
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
Reduce noise PC fan spacer 120mm / 140mm 5mm thick
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 120mm computer fan, this versatile device is perfect for keeping you cool or for fume extraction during soldering and…
Mounts to a standard 120mm fan and the other end fits inside 3 inch aluminum flexible ducting. Mount holes to fan are size M4. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
Extends the profile of the AOOSTAR R1 and R7 2-bay NAS PCs to add a 120mm fan. I split off the CPU fan header (with a standard PWM fan splitter) as the chassis header doesn't support PWM and outputs 12v continuously. Screws into the…
For a detailed guide on how to put this together, please visit our article here: https://www.corsair.com/explorer/diy-builder/cases/3d-printable-hard-drive-cage/ TL:DR - We have made two versions: Infinirail version - fits FRAME 4000D…
I've always wanted to design a nice fan, similar to the cooling fans that computers have. This turned out quite good in terms of both looks and performance. I was surprised that it was easier than I thought to get the right look. In terms…
Another fume extractor. I looked at what was available and made my own. I took the idea of a slotted housing for the filter from another design and then built that and everything else around the fan body. Fitting the wiring into the…
I made a remix at my friend's request. maybe it will be useful to someone.
This is a dust filter for a variety of fan sizes. The printed mesh blocks dust and debris from getting stuck in a fan. You could add a colour change in the second layer to create a beautiful effect. Make sure you are printing with a 0.4mm…
UPDATE 2025-05-26 : Added “100mm-tube-connection”, to be used with https://www.printables.com/model/1337372 for ducting to IKEA UPPÅTVIND! UPDATE 2023-01-09 : Added the possibility to use a filter on the inside of the cabinet…
This 2 piece fan duct can be used to limit/direct the direction from which air is sucked into the fans or blown out. Once the fan plate and fan duct are printed, they can be glued togehter. I used super glue, which works fine. You could…
120mm fan grill 6mm thick, with 4mm clearance between fan and grill. Compatible with regular self tapping screws like used on computers ------ Support me on Patreon ! https://patreon.com/squirrelf3d or buy me a coffee…
I needed a way to get some fumes out of my garage without opening the door all the way during the winter. I designed this duct to attach to a 120mm fan so I could attach some flexible ducting to it with a hose clamp. I opened the door…
Hello! Here is my design of air filter/fume extractor for my enclosed or not printers! I designed it for these HEPA filters: https://fr.aliexpress.com/item/33037955841.html?spm=a2g0s.9042311.0.0.27426c37H91RYB And finally I decided to use…
I needed to cool down my 2x10Gbe Ethernet card, NVMe drives and SAS card.
This is a conversion for the Wind Ace Wind Simulation for Sim Hub that converts the back so it takes a 120mm fan. There is an adapter for the body so a fan can be fitted and then a rear flow guard for the back. I used the GDSTIME GDP1238…
I scaled up Chris Borge's fantastic Kirby fume extractor model to fit a 120mm fan! I modified the fan bay fit so no trimming should be required for a 120mm fan. Options are available for using screws or heat set inserts to secure the fan.…
I originaly intendend this propeller to fit for my DIY electric SUP-board motor but you can use it to drive what ever you want. this design fits on 10mm D shaft but you can easily modify the design to fit any other type of shaft. Keep in…
Brackets for joining 120mm fans together. Join fans in many configurations for different applications
UPDATE 1/29/20: Design update to v2! Thanks to input from members here I reworked the stack so the fan is now in-between the HEPA filter and the carbon chamber. This means the fan is now pushing air through the carbon rather than pulling…
I wanted to be able to quickly connect and disconnect my 100mm duct to the 120mm fan of my engraving housing so I created this twist lock connection set . duct for 120mm fan 100mm duct hose (with a notch for optional attachement of a zip…
I made two fan grills for my Lack Enclosure, one for a 60mm Noctua NF-A6x25 PWM and the other one for a 120 mm Noctua NF-P12 redux-1700 PWM. Those will probably fit most 120mm and 60mm Fans
I designed this Adapter to Mount a 140mm Radiator on a 120mm Mount. I can also be used to Mount an 120mm Fan on a 140mm mount. Made an Test_ Piece as request. Instructions .2 mm Layer Height .8 mm Shell Thickness .6 Bottom/Top Thickness…
------ UPDATE Apr 2024 There's a great remix of this model by @shreid_521169 with improved air circulation and a few other adjustments, I recommend checking it out here:…
I noticed that a lot of models for fan grills mimic metal ones - not ideal for strength since the properties of the materials are so different. I couldn't find a 3D printable fan grill that I liked, so I made a few of my own. This one has…
On the right side of the Lian Li 011 XL, there is a spot for 3x 120mm fans. After initially assembling, I noticed that all of the wires ran through this location and blocked a lot of airflow. I created this fan duct to almost make contact…
Louvers, for a 120mm fan. Print 6 blades flat side down. Keep the heat where you want it.
3U too big for small bedsize 1U onlyfan version - if you just want to mount fan or have small bedsize mod version please check Mods folder in 10 inch Rack Front Cover for cable hook If you enjoy my work, please consider support at link in…
A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…
My daughter was showing me something similar on Etsy that she wanted for her new PC build, so I decided to make an attempt in Blender with geometry nodes and such before buying the premade version. Here's the original Etsy:…
Update nov 2025: The spacers were a bit too short, which may have caused the lamellas to be slightly too squashed. I apologize for that. The new spacers should work better. Ideally, secure them with self-locking nuts and perhaps don't…
I noticed that a lot of models for fan grills mimic metal ones - not ideal for strength since the properties of the materials are so different. I couldn't find a 3D printable fan grill that I liked, so I made a few of my own. This one has…
A simple yet functional honeycomb fan grill for 120mm fans. Can be attached using screws or zip ties (if you don't mind ghetto mounting solutions ;) ). Support If you'd like to support me for the 3D models I distribute for free, you can…
I designed a 120mm fan grill template 2 months ago because there were no good options available for free. The fan grill is just a template, so hopefully people can use this to make some cool fan grills. The design is also CC0 so do…
I am building a print enclosure and wanted the ability to close off the extractor fan hole to retain as much heat as possible when the fan is not being used. I found the original design by @Edezigns:…
With this adapter, 120 mm PC fans can be mounted at a 10° angle inside the case. The adapters can be connected via a clamping mechanism, allowing you to chain together virtually any number of fans. To mount one fan with an adapter in the…
A shallower remix of my Triple Shelf with Honeycomb Storage Wall Sides 220mmW x 150mmD
I noticed that a lot of models for fan grills mimic metal ones - not ideal for strength since the properties of the materials are so different. I couldn't find a 3D printable fan grill that I liked, so I made a few of my own. This one has…
Simple adapter to fan I modeled to fit 4 inch duct. End piece was modeled to fit and vent under a window. End piece can be skipped depending on your purpose.
Für TOOLCRAFT 79-7202 Aktivkohlefilter (L x B x H) 120 x 120 x 10 mm ( https://www.conrad.at/de/p/toolcraft-79-7202-aktivkohlefilter-l-x-b-x-h-120-x-120-x-10-mm-2283829.html )
This is a simple 120mm Fan cover Print Settings Resolution: 0,2 Filament: Sunlu PLA Category: 3D Printer Parts
I printed it in pla and used chassis fan screws to assemble. holes are 4.5mm
Fan holder for GoPro/MMS attachment. You can get the base here (one on the picture) or a larger one here (180mm to fully use Prusa Mini).
No supports required! Cut the positive and negative wires, and terminate them in one of these blocks. Then connect the block to a 12v USB boost - USB Boost Line Power Supply Module 5V To 12V Power Cable Depending on your fan model, you…
Build the ultimate DIY soldering fume extractor from an old 120mm PC fan. This all-in-one design included a DC power forwarding hub, detachable magnetic hood, voltage display and easy access carbon filter bay. The fume extractor includes…
A kind of funky fan shroud for a Nvidia Tesla P40 that cools not only the card at a rated CFM but also blows air into the next PCI slot for 10gig networking, HBA, etc. PWM controller makes the fan basically silent in a full tower case.…
Hello, to download the fan holder 120mm for water cooling in the aquarium, the holder is for glass mounts, for a standard 120mm fan: http://s.click.aliexpress.com/e/ZEllcLO http://s.click.aliexpress.com/e/Kipj37i to download versions for…
This is a remix of the already remixed 3,5" Vertical HDD mount from AlephBaker for three 3,5" HDD drives. I removed the bottom group, so that the HDD mount can be mounted on top of a 120mm PC fan. This allows air flow along the mounted…
A 120mm fan duct for 90 degrees mount. I use it for my Alveo3D filtration system, but it should fit to any standard 120mm fan. The pipe has 0.8mm wall, which is not super sturdy, but works well and saves filament. See the dimensions if it…
Diese Halterung ist für die Zusatzkühlung der Deye Hybrid Wechselrichter 8, 10 und 12 KW LP 1 - https://www.amazon.de/dp/B0CCRPXSZY?psc=1&ref=ppx_yo2ov_dt_b_product_details LP 2 - https://www.ebay.de/itm/403863623678 Netzteil -…
WORK IN PROGRESS This is a fan housing that holds one or two 120mm x 25mm fans. Five choices of Air Directors Two sizes of base for single or double fans Adjustable direction on the two smaller tops Three sizes of ring (Dyson) style tops…
Keeps the Filament under control, but not bound... less tangles and unwraps of the spool. Use with C Clamp https://www.printables.com/model/1982-c-clamp-for-retaining-spool-on-spool-holder This is a snap fit to the double spool frame…
This is a cover for 120mm PC cooling fans with a louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous though, you can…
After completing my Lack Enclosure, the next step was to add an exhaust system, but the last thing I wanted to do was cut a big hole in my acrylic side panels. My solution? Cut a hole in the table surface instead! No hole saw or CNC…
The heat today was too much. I don't have a desk fan but a whole bunch of 120mm fans knocking about so designed a quick desk mount. Uses a pressure fit to set the angle. Currently got an old but powerful yate loon fan mounted on it,…
You can easy print in two colours. The thing is 3mm and Gengar is 3,2mm. So just print the last layer in purple to get a good looking finish. The Gengar120mm PC Fan Cover is an enchanting decorative accessory specifically designed for…
This adapter allows a standard 3.5-inch hard drive to be mounted in most 120mm fan slots. It is designed for versatility and can accommodate any 3.5" HDD. I used M3 screws and nuts to mount it to my case. I suggest washers for the top if…
Ist halt ein einfacher Griff mit 120mm Lochabstand und Sechskant für M6 Muttern