Search results: 180mm

Sort order

182 models

P
PrintablesPrintForge

Easy-Thread Containers+Lid - Multiple Sizes d30-180mm x h30-180mm

Easy-thread, quick-screw (I had to say it sorry) fiesta! A plethora of containers with easy-thread screw-tops. I was not satisfied with my previous creation due to a lack of deboss resulting in unsightly seamlines. Also the walls were…

Downloads
1,162
Likes
329
Rating
5
P
Printablesmcko

Big hexagon flower pot mold form 180mm

Big hexagon flower pot mold form 180mm

Downloads
834
Likes
178
Rating
5
P
PrintablesLannix Design

V2 House Number 1 - 180mm

A number 1 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
720
Likes
38
Rating
0
P
PrintablesLannix Design

V2 House Number 7 - 180mm

A number 7 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
627
Likes
41
Rating
5
P
PrintablesZedic

Bed Level Z-Offset Tests Spiral Circle and Square 200mm 180mm 160mm

Spiral Bed Level Test These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size. I use these to set the Z Offset on the fly after auto leveling with a…

Downloads
616
Likes
9
Rating
5
P
PrintablesShakaworld3D

Shakaworld3D Twisted Rope Dragon Lizard 180mm X 180mm

Easy to print in place. Will fit on a 180mm X 180mm build plate.

Downloads
594
Likes
96
Rating
0
P
PrintablesLannix Design

V2 House Number 2 - 180mm

A number 2 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
584
Likes
41
Rating
5
P
PrintablesLannix Design

V2 House Number 3 - 180mm

A number 3 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
577
Likes
40
Rating
5
P
PrintablesFusedForms

Secure Bag Clip Print In Place / 60-180mm Sizes

A very secure bag clip to close any opened bags. The hinge is designed with low tolerances to ensure a secure fit, and prevent any loose feeling parts. Clip surface is recessed for enhanced grip. The two notch design makes sure that the…

Downloads
541
Likes
183
Rating
5
P
PrintablesLannix Design

V2 House Number 6 - 180mm

A number 6 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
523
Likes
32
Rating
5
P
Printables3DMAC

Vaza dekorace pro kvetinu 180mm

Další dekorační váza z mé dílny, tentokráte lze dovnitř nalít vodu a dát živou květinu. Another decorative vase from my workshop, this time you can pour water inside and put a live flower. Print instructions filament PLA 0.1mm detail…

Downloads
485
Likes
28
Rating
5
P
PrintablesLannix Design

V2 House Number 8 - 180mm

A number 8 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
462
Likes
36
Rating
5
P
PrintablesLannix Design

V2 House Number 5 - 180mm

A number 5 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
461
Likes
29
Rating
5
P
PrintablesLannix Design

V2 House Number 0 - 180mm

A number 0 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
452
Likes
36
Rating
5
P
PrintablescoffeeFueledDiy

Roll-Up Rose for Small Print Bed (Prusa Mini+ / 180x180mm)

Sharing these files to make it easier for anyone with a small print bed who wants to make one of these roll-up roses. Overall, the model is scaled down 80% with a minor modification to the thickness of the rose petal part. Follow the same…

Downloads
447
Likes
83
Rating
5
P
PrintablesLannix Design

V2 House Number 4 - 180mm

A number 4 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
445
Likes
35
Rating
0
P
Printablessergo

Tape peg board holder 180mm wide. For 1 by 1-inch peg board.

Tape peg board holder 180mm wide. For 1 by 1-inch peg board. Please see my other pegboard tools and holders in my portfolio. Thanks for your likes and downloads.

Downloads
434
Likes
89
Rating
5
P
PrintablesFractalDreams

Knife Sharpening Guide for 60 x 180mm whetstones, sized for smaller printers

I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…

Downloads
428
Likes
136
Rating
5
P
Printablesluma

Soft Jaws for Knipex 180mm Pliers Wrench 86-XX-180

Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…

Downloads
398
Likes
52
Rating
5
P
PrintablesDM4DS

Planetary Gear - Big Boy Size 180mm! - print in place - pip

Big boy ( girls ) sized planetary gear. Print in place with 3mf file. Just load it - layer height I recomment 0.2mm but higher also works - and print it :) It can be printed on every printer with a printbed size of 200x200mm. Height is…

Downloads
388
Likes
57
Rating
0
P
PrintablesLannix Design

V2 House Number 9 - 180mm

A number 9 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
354
Likes
25
Rating
0
P
PrintablesMasterKoopa

3030 Extrusion 180mm & coupler

3030 Extrusion and a coupler. The goal is to find a way to print and replace aluminum extrusion in printer builds. Why? Well, to do it all with printing. And the extrusion is cheaper this way. Printed out real nice but joining these parts…

Downloads
331
Likes
65
Rating
5
P
Printablesicreated

KP3S to VzBot 180mm

This is a conversion for the KP3S to Vzbot 180mm. This can also be built just as a 180mm Vzbot, just designed the rails to use the rails from the KP3S and the KP3S bed. I have included a STEP file for people to use. The original design…

Downloads
328
Likes
50
Rating
5
P
PrintablesLegitHotPotato

Organizer 125x180mm (IKEA ENHET) bathroom cabinet

Made an organizer for our bathroom cabinet (Ikea Enhet 130cm depth) Easy to print, and should fit most bathroom cabinets of other brands too. Wall Thicknes is 2mm. Wall Height is 40mm. + additional 2mm Floor Thickness (Total 42mm Height)…

Downloads
250
Likes
53
Rating
5
P
PrintablesHugentobler3D

Circle Drawing Template 10mm - 180mm

The template is has a diameter of 7.1" and offers diameters from 10 to 180 mm/0.8 to 7.1 inches, which makes it ideal for drawing various arcs and corners. Its slim design allows it to fit into small toolboxes for easy portability. It can…

Downloads
229
Likes
85
Rating
0
P
Printablesblechbude

Schachtel mit Deckel, Box with lid; 180mm x 120mm, Höhen / heights 30 mm - 100 mm

Schachtel mit Deckel. Abmessungen Innen: Länge 180mm, Breite 120mm, Höhen von 30mm bis 100mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Internal dimensions: length 180mm, width 120mm, heights from 30mm to…

Downloads
218
Likes
12
Rating
5
P
PrintablesSoBaldrickEsq

Sovol SV08 Electronics Cover Fan Mod (2x maximum 180mm Fans) v2

Remix of a Remix, I have removed 15mm from the front wings so they do not interfer with the base.

Downloads
194
Likes
35
Rating
5
P
PrintablesLannix Design

V2 House Letter B - 180mm

A letter B that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
187
Likes
9
Rating
5
P
PrintablesEsZett

Sovol SV08 Electronics Cover Fan Mod (2x maximum 180mm Fans)

WORK IN PROGRESS! Now its possible to install one or two Fans with each maximum 180mm. Be sure to use 24v Fans or install a step down converter (buck converter) to reduce the Voltage your specific Fan. The mainboard supports (i think)…

Downloads
184
Likes
36
Rating
0

LowRider 3 CNC - control box case for BTT SKR Pro 1.2 board and a BTT TFT35 E3 touchscreen (v1.3.4) SHORTER VERSION (180mm) FOR SHORTER PRINTERS

Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…

Downloads
182
Likes
23
Rating
0

Air Hose Adapter / 125mm > 180mm Abluftadapter

Air Hose Adapter for 125mm to 180mm, outer diameter, no support required german version below Dieser Abluftadapter hat an der kleinen Seite die Möglichkeit einen 125mm Abluftschlauch anzuschließen, auf der anderen Seite ist der äußere…

Downloads
175
Likes
22
Rating
5
P
PrintablesSebazzz

PrimaCreator 500g spool extender for 180mm spools for Bambu Lab X1 AMS

Community tested as I don't have the right spool and have designed this on request! “Scale to 99.95%” Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage…

Downloads
170
Likes
17
Rating
0
P
PrintablesPotatoCat

Prusa Mini-Z Axis calibataion tower-180mm max

This print is intended to test the full z-axis print volume of the Prusa mini at 180mm. It is a test tower with a width of a single layer designed to show if there is wobble at different heights on your printer. Print using the “Spiral…

Downloads
166
Likes
14
Rating
5
P
Printablesthinmoto

Yet another HotWheels bridge (180mm fit)

Similar models what i found, did not fit to my printer table (180x180), so i made new model :) I print it in position as on screenshot, with supports only for wide part. At first i was afraid that the part would break in a thin spot above…

Downloads
166
Likes
35
Rating
0
P
PrintablesNozzle
Downloads
151
Likes
34
Rating
5
P

Fractal Design Torrent 180mm Fan Sled (420mm AIO)

This is a custom fan sled design to handle the problem of the provided metal fan sled with the Fractal Design Torrent not accommodating the massive Arctic Liquid Freezer II 420mm AIO's thick radiator. Without this, the radiator sits on…

Downloads
145
Likes
13
Rating
5
P
PrintablesEli

Adapter to mount 120/240 AIO to Fractal Torrent 180mm fan

I upgraded cases and realized I couldn't use an AIO with the Torrent case. So I designed a bracket to mount the AIO to the front 180mm fans. It seems to work well. I designed it to print with supports on build plate only. I would also…

Downloads
145
Likes
12
Rating
5
P
PrintablesFyrby Additive

140mm Fan Mount For Square 180mm Ventilation Duct

I have non-standard ventilation duct in my basement that is square and made of wood, with an outside diameter of 180mm and an inside diameter of 140mm. Hence, the wooden frame around the outside is 20mm thick. I have a need to remove…

Downloads
142
Likes
27
Rating
0
P
PrintablesBaragor

Kamm für Lange Haare - Comb for long Hair -- 180mm

the perfect comb for long hair with a lot of heart Please leave me a like if you like it. It costs you nothing, but it helps me enormously. THANK YOU!!! -------------------------------------------- Der perfekte Kamm für lange Haare, mit…

Downloads
135
Likes
12
Rating
0
P
PrintablesMatteo Soligo

Bambu Lab AMS Flashforge spool (180mm) adapter

Remix of DAVEfromCZE's spool adapter, You can use it for 1Kg Flashforge's spool (180 mm diameter), it's 4 mm shorter than DAVE's one to avoid that the Flashforge spool to touch the AMS cover.

Downloads
134
Likes
9
Rating
5
P
PrintablesDarren

Xiangqi / Chinese Chess - complete set (pieces board box) Western-style pieces, 180mm bed

This is a Xiangqi (aka Chinese Chess) board and pieces, targeting the Prusa Mini. It fits in the build plate by nature of being sliced into parts with connectors between. It is multi-colored based on layer changes (for the playing pieces)…

Downloads
129
Likes
16
Rating
0
P
Printableslunny

Desktop Bin 180mm Square x 170mm

Small bin best printed with "fuzzy Skin" in prusa slicer

Downloads
126
Likes
9
Rating
2
P
PrintablesLars Ivar Haave

Bambu Lab 180mm spool adapter

This is an adapter for the 180mm EasyPrint (Prima Creator) Spool to the 200mm spool size used in the Bambu Lab AMS. Just print it and snap it on. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Custom Section…

Downloads
125
Likes
7
Rating
0

Zen Garden Bases 180mm

See the whole Zen Garden Set!! https://www.printables.com/@TripleGWorkshop/collections/764364

Downloads
123
Likes
53
Rating
0
P
Printablesfactory13

Rivian Crossbar Inserts, Set of 180mm, 270mm, & 540mm length

Update 9.18.24: I re-uploaded 270mm and 540mm files because there was a dimensional error. Also tested on Bambu P1S in PETG, but I still recommend ASA for UV resistance. Printed on QIDI X-Smart3 with QIDI branded ASA filament on default…

Downloads
121
Likes
19
Rating
5
P
PrintablesLannix Design

V2 House Letter A - 180mm

A letter A that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
116
Likes
8
Rating
0
P
PrintablesDesignMeSilly

180mm to 140mm Fan Adapter - Fractal Mood

An adapter to replace the Fractal Design 180mm fan with a 140x25mm fan. Comes with 25mm spacers so the original screws for the 180mm fan can be used. The height of the adapter itself is 13mm so the fan's height is the same as the 180mm.…

Downloads
111
Likes
6
Rating
0
P
Printablesalexan_e

Filament Spool Winder - 173mm base for 180mm print table (reinforced version update)

My printer has a 180 mm table and I was not able to fit the front and rear base so I have remixed them in order to fit. All the model dimensions are the same as the original except from the lower frame that has been cropped and the holes…

Downloads
106
Likes
9
Rating
5
P
PrintablesAdam

Pegboard mount for 7in/180mm Knipex Pliers Wrench 86 03 180 - Magnetic

Use 3x6mm magnets. The hexagons holes allow you to get them out easier if absolutely needed. But you do need to hammer/press them in. No glue needed. Printing You do not need supports for the hexagon hones, this was able to be printed…

Downloads
106
Likes
12
Rating
5
P
PrintablesJarda

Profil L 180mm

Profil L 180mm x 10mm

Downloads
101
Likes
7
Rating
0
P
PrintablesStéphan

Music stand tray 180mm

Music stand tray: High: 67mm Lenght: 180mm Depth: 55mm Brim: Yes Supports: No Resolution: 0,2 Infill: 20% Wall: 3 Wall thikness: 1,2mm Filament color: Black Filament material: PLA

Downloads
101
Likes
21
Rating
0

3Dsets style links 35mm to 180mm

3Dsets style links. Lets you adjust your suspension on 3Dsets cars. Ball not included. 35mm to 180mm. ________________________________________________________________________________________________________________ Black Crow Axles on…

Downloads
95
Likes
28
Rating
0
P
PrintablesNCKcreation

Base panier crochet 180mm / Crochet basket base 7"

Base pour panier en crochet de 180mm de diametre. Composé de 40 trous circulaires de 10mm. Hauteur de 5mm mais modifiez si vous le souhaitez, à partir de 3mm c'est sufisament rigide. Crochet basket base of 7" diameter. 40 holes of 0.4"…

Downloads
92
Likes
36
Rating
0

Ski & Snowboard Vise (Waxing/Tuning Stand) optimized for small printers (180x180mm)

This design is a remix/remake of the original model by 0161design , which I really liked but couldn’t fit into the build area of my printer. To solve this, I split the model into three parts and added tongue‑and‑groove joints for quick…

Downloads
92
Likes
14
Rating
0
P
PrintablesNozzle

woodworking ruler 180mm geodreieck 180mm

A simple 180mm ruler with metric scale.

Downloads
90
Likes
8
Rating
0
P
PrintablesFlyinman

180mm wall hook for RC planes tails.

I wanted a simple arm bracket from which to hang my RC planes, this model lets me hang 1x 1.5m span, and 3x 1m - .6 spans. With a mix of traditional, ‘V’ and 'T' tails. Mounted with 2x rawl plugs and 2x drywall screws. Mines printed in…

Downloads
87
Likes
12
Rating
5
P
PrintablesAudigo Viggo

Prusament spool 180mm/AMS (Prusa Mini, Bambulab A1 mini)

Emergency spool for 180mm build plates with inner diameter of the Prusament spools (and many others) and compatible with Bambulab AMS (inner hole diameter is 55mm) I call it ‘emergency’ because Prusament spools are usually taller than…

Downloads
86
Likes
14
Rating
5
P
PrintablesDTH

VW T4 6.5" door speaker spacer (180mm)

Remixed to fit 180mm face mount rings without creating an annoying raised shoulder.

Downloads
82
Likes
12
Rating
0
P
PrintablesMatt Voska

Duotone Kiteboard Handle 180mm

Use a water/UV resistant filament like ASA, PP, or PETG; don't print in PLA. I recommend at least 35% infill and annealing after printing for maximum strength. measures 180mm between the screwhole centers.

Downloads
77
Likes
2
Rating
0
P
PrintablesJózsef Krizsik

Rake 180mm

Simple rake head, 21mm handle required. Print Settings Rafts: No Supports: No Resolution: 280 Infill: 20 Filament: PolyMaker PETG Category: Outdoor & Garden

Downloads
75
Likes
9
Rating
0

BambuLab A1mini Waste collector with blade bracket + 180mm heightened baffle

English: The picture is an old model I designed before. The current MK02 file is a new model that has fixed many problems. The model file is a scrap collector and a 180mm heightened baffle. You can use A1m to print the whole part [Of…

Downloads
74
Likes
15
Rating
0
P
PrintablesMarekZCMB

Voron Trident 180mm skirt parts

When 150mm is small and 250mm is too big. The answer is 180mm :-)

Downloads
72
Likes
11
Rating
5
P
Printables3dprintcastle

Christmas Tree 180mm

Just a cool deco tree hope you like pritable without supports testet with an Ender 3 s1 Pro and a Bambulab P1S.

Downloads
70
Likes
19
Rating
5
P
Printables_3DDaviDLab_

Storage basket 87x180mm

Imagine a long, tapered 3D printed box, with a fascinating texture like a hive of bees. Here is a brief description: This box has a length of 18cm and a width of 8.7cm. The measurement was chosen to fill the 26.3cm piece of furniture with…

Downloads
69
Likes
22
Rating
0
P
Printablesastrobunny

Better jigs for Micron 180mm

Y tool had the wrong size for Micron 180mm but it was such a good tool compared to the other jigs because you just pushed it up against the extrusion to get the right length. I decided to duplicate it for the X and Z extrusion alignment,…

Downloads
64
Likes
18
Rating
5
P
Printablesqwerty

XRP Mini Frame (180mm x 180mm - compatible)

This is the latest Alpha - holey- Single part Frame V1.5.3MF updated to fit a Prusa MINI+. The measurements are 180mm x 180mm compared to the official frame with a size of 191.7mm x 193.11mm. The size for board, motors, rails mounts etc…

Downloads
64
Likes
4
Rating
0

Ball Bearing - 180mm

4.5 mm ball bearing Ordered this one: But be careful mine was send open. So I had to pick up a lot of balls. If you like to, check out my other designs too!

Downloads
62
Likes
19
Rating
0
P
PrintablesShakaworld3D

Shakaworld3D Smooth Gaaris-Leelo Dragon 180mm X 180mm

Easy to print. No supports needed. Depending on your print bed adhesion a brim may be used. Will fit on a 180mm X 180mm build plate.

Downloads
61
Likes
4
Rating
0
P
PrintablesPeter Martin

Trio of Rotating Work Tables 180mm with Height Adjustment option

Rotating Work Table 180 UPDATE : 16 Feb 2025 - added optional Adjustable height Base that goes from 100mm to 200mm. Can be used with other Model Turner variants. Just a simple update to my Model Turner giving it a simpler redesign, making…

Downloads
59
Likes
14
Rating
0
P
PrintablesKeith Poole

180mm fan to 6" flexible duct flange shroud

Mount your 180mm fan to 6" flexible ducting. Print Settings Rafts: No Supports: No Notes: print with flat side down, no supports needed Category: Other

Downloads
57
Likes
6
Rating
5
P
PrintablesJaans

Simple in-drawer storage / organiser box with lid and handle - 180mm L x 130mm W x 90mm H

Found it helps to keep some of the bathroom drawers organised with boxes for items like cotton balls, Q-tips, etc. This box is a simple structure and simple to print. 180mm long x 130mm wide and 90mm tall. Printed in ABS+ using typical…

Downloads
57
Likes
5
Rating
0
P
PrintablesCaptBlack

Shard Fan Shroud 180mm Half with connect pegs

360mm fan shroud, fans must be all in one or connect to a rad to allow for this to mount correctly. Printed in PLA but suggest stuffer material if mounting at the top of pc case.

Downloads
57
Likes
8
Rating
0
P
PrintablesAneoPsy

Wall Support for Random Orbital Sander 125mm/150mm/180mm (Parametric)

This is a wall support for an Random Orbital Sander Support. I glued it with epoxy to my wooden wall. You can remix it to add screw support, or ask me if you need it. Size available: 125mm - 150mm - 180mm Medium (10mm thickness) and Heavy…

Downloads
54
Likes
4
Rating
0
P
PrintablesSano

Box for small screws 180mm x 150mm

My version box for screws and small parts. Top and bottom printed with 0,8 nozzle, clip with 0,4 nozzle. Do you need 6x M3x30 screws Enjoy

Downloads
54
Likes
6
Rating
0
P
PrintablestheSmith

180mm Fan Laptop Stand

This is a laptop stand for a laptop that is up to around 2cm in width. Its primary draw is that it can hold a 180mm fan that is 180x180x32mm in size, although other size fans could probably fit if you forgive the fit not being perfect,…

Downloads
53
Likes
8
Rating
0
P
Printables3D_print_de

180mm fan mount for ikea lack printer enclosure

8 screws are required. It is best to use short 3mm wood screws. 120,5x120,5 Rectangular hole in lid required

Downloads
52
Likes
8
Rating
0
P
PrintablesMichal Schwarz

7.5" ePaper frame printable on A1 Mini (side <= 180mm)

Print with 0.2 mm layer height, supports are needed only for the hinges. It holds together with the snap fit prongs, but it can alternatively be glued together using a glue gun if needed (for me it wasn't needed, the snap fit holds really…

Downloads
52
Likes
10
Rating
0
P
PrintablesDavid

Skadis Stacked (180mm, suitable for small printers)

Couldn't find any stacked skadis pegboards so I made one up in the slicer quickly. I'm guessing it's because it's much cheaper to just grab it from ikea instead. Did this with wet filament across different brands as a worst case scenario.…

Downloads
51
Likes
0
Rating
0
P
PrintablesWorti

HAPE Quadrilla Straight Line hole dimension 180mm Half Pipe

The hole dimension 180 mm (measured at the center of the holes) is for the short lines. It fits on the roundabout and diagonally into the printer. I constructed it for my kids. I was inspired by another murble run: Lena Cascade murble…

Downloads
50
Likes
11
Rating
0
P
Printables3dUrla

Model Turner 180mm

A simple Model Turner. No support needed.

Downloads
50
Likes
8
Rating
0
P
PrintablesFurkan

180mm Adjustable Air Vent / Ayarlanabilir Havalandırma Menfezi

Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…

Downloads
47
Likes
4
Rating
0
P
Printablesblechbude

Schachtel mit Deckel, Box with lid; L 180mm x B 100mm, Höhen / heights 30 mm - 120 mm

Schachtel mit Deckel. Abmessungen: Länge 180mm, Breite 100mm, Höhen von 30mm bis 120mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Dimensions: length 180mm, width 100mm, heights from 30mm to 120mm. Printed with…

Downloads
47
Likes
3
Rating
0
P
PrintablesGrogg3D

Rake Head 180mm (Handy Size | Robust | Kid-Compatible)

A simple rake head, with 2 variants. One for a 21mm handle and another for a 16mm handle (kids size). I enabled supports just for a clean head-to-handle cosmetic advantage and also for the screw hole. I just used snug, very simple to…

Downloads
46
Likes
13
Rating
0
P
Printablesfeletoch

Rook 2020 180mm bed

180mm aluminum bed is cheaper and easier to come by than the the Voron 0 bed. I got this for around $8 from Taobao that comes with heating elements and thermostat and an extra spring steel bed sheet for another $6. Extra wire harness file…

Downloads
45
Likes
10
Rating
0
P
PrintablesEmemell

Ubiquiti 180mm Wireless Access Point Key Tool

A tool for unlocking the larger Ubiquiti UniFi 180mm (larger) access points, like the AP AC LR. It is a tight fit because it needs to be to release the catch as much as possible. It can be put on a keyring. I printed in PLA+ at 100%…

Downloads
44
Likes
4
Rating
5
P
Printablesalexan_e

WOWStick box 180mm version

I was not able to print the original model in my printer because my table is 180mm x 180mm so I have remixed the model to fit in 180mm tables. I kept the basic parts, the tips and the screwdriver. I also added two hinges on one side and…

Downloads
44
Likes
4
Rating
0
P
Printablesabrickshort

Cascadebricks brick sorter remix for Prusa Mini+ 180mm x 180mm print area

I used the Cut and Merge tools in PrusaSlicer 2.5 to make these models. Hole sizes are unchanged except where intersected by cuts made to resize the model. I am still in the process of printing these for the first time. Be sure to let the…

Downloads
43
Likes
0
Rating
0
P
PrintablesMakerCameron

Long Skadis Shelf (180mm long)

Use for this Model A sturdy, long (around 180mm) shelf. I used T-nuts (details below) as this kept things sturdy but didn't have to make it overly tall. Having used the nice Bambu Lab Hotend Box (link below) for a while, I eventually…

Downloads
42
Likes
10
Rating
0

Ball Bearing - 180mm (with Separater)

4.5 mm ball bearing Ordered this one: But be careful mine was send open. So I had to pick up a lot of balls. If you like to, check out my other designs too!

Downloads
42
Likes
13
Rating
0
P
PrintablesMik Fik

Refill spool 180mm (for print on Mini+)

No tools needed. No other parts (screws, etc.) needed. Print with PETG. For minimum material consumption use no bottom and upper layers, 4-5 perimeters. Only 89g of filament used. Update 2025-12-13: Ribs were added for better filament…

Downloads
41
Likes
5
Rating
5
P
PrintablesSkyguy

2x 180mm Fan mount for Qube 540 (top)

I designed a fan bracket to mount two large 180mm fans to the top of the Qube 540 case! Since it's a pretty large part, I split it into two halves that you can print individually.

Downloads
38
Likes
9
Rating
0
P
PrintablesHolzerMax

Ariane 5 - Recut Body for Prusa Mini (or other Printers with 180mm height)

The original Model is very high quality, but could only be printed on Printers with a z-height of around 20 cm, even with the already parted body. I recut the full body into two smaller pieces, and added connectors in Prusaslicer. The cut…

Downloads
35
Likes
3
Rating
0
P
Printablesotto

Modular Winder Spool Frame 2 Base for 180mm Mini Printers

Simple split of the 220mm base from @STORM DESIGN's Modular Winder Frame 2 so that the project can be completed on mini printers with 180mm beds like the Prusa Mini, Bambu A1 Mini, Voron Micron, Rat Rig V-Minion, etc. No glue required -…

Downloads
35
Likes
3
Rating
0
P
Printablesbenjohan4

Vixen GP Compatible Rail 180mm

180mm Vixen GP compatible rail with several versions. The rails are designed for telescopes on the smaller side. As the rails are made with 3D Printed plastics I can't guarantee a max load, so print and use at your own risk! The slots on…

Downloads
34
Likes
2
Rating
0
P
PrintablesLannix Design

V2 House Letter D - 180mm

A letter D that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
34
Likes
3
Rating
0
P
Printablesrobglinka

MFT Fence - 40mm x 180mm x 10mm

Festool MFT/Parf style small section of fencing to be used as an out-feed support, or small fence for additional support for longer parts. Can be used by itself, with a different rail setup, such as a rail section mounted to the bench.…

Downloads
33
Likes
9
Rating
0
P
PrintablesLannix Design

V2 House Letter C - 180mm

A letter C that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…

Downloads
33
Likes
1
Rating
0
P
PrintablesShinobi Burn

Photo Frame 180mmx130mm

This frame sized 180mm * 130mm Infill suggested: 25% Top and bottom thickness: 0 or depend on yourself. I make myself with 0 to bring out different kind of infill to make the frame more beautiful.

Downloads
33
Likes
2
Rating
0
P
Printableskuroudo

180mm Drawer Rails

A remix optimized for a Drawer I made to fit the dimensions of the Prusa MINI+. Just shortened the rails to 180mm since I wouldn't need those extra 20mm @Markus_27799 designed in the shortest rail. Added a Left and Right version with…

Downloads
33
Likes
5
Rating
0