Gridfinity 1x7 Printing Plate Holder (Fits Bambu Lab X1C / P1P)
Remix of the Bambu Lab X1C plate holder to work with Gridfinity. Uses 1x7 grid spacing and has magnet holes
- Downloads
- 409
- Likes
- 82
- Rating
- 4.88
26 models
Remix of the Bambu Lab X1C plate holder to work with Gridfinity. Uses 1x7 grid spacing and has magnet holes
Gridfinity holder for Milwaukee Ratcheting Screwdriver 48-22-2322. May be compatible with other models. I wanted to create a gridfinity holder for this screwdriver that used all 7 tiles within the gridfinity I was using within my Packout…
my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…
Removed the holes for the magnets to print better with larger nozzles and layer heights. Also made a longer version to fit some of my larger utensils. Models are 1x6 and 1x7 in size. This is actually modeled from scratch (minus the…
Printer: Bambu Lab P1P Filament: Amazon Basics Silk PLA - Blue
Big bed required 300x300mm Recomended bins height 09 (67mm) or less. https://www.printables.com/model/774585-light-gridfinity-bins-collection-with-magnet-only/files
I made a middle plate holder for the design by @maxelman . This will allow whoever prints this to have increased contact area with the print beds, more magnets resisting them falling over, etc. You could theoretically print 5 of these to…
No Supports needed! Endcap at one side for better print bed adhesion! Print vertically, check attached pics My printer settings: Material: PET-G Wall loops 2 Infill: 30% Gyroid adhesion: Brim Suport on build plate only
This is the Prusa Steel Sheet Holder, 3er , modified for Gridfinity! Holds three sheets, and occupies 1x7 blocks. Can optionally be affixed with magnets, screws, clickfinity, or just by gravity. The hex base is no longer necessary and is…
A custom bin to securely and safely hold your quick change hobby knife by Ryobi . Features: Detents hold knife at varying levels of firmness. If you place the knife all the way in it will hold even if the blade is knocked on the floor,…
English text below ______________________ Bei der praktischen Anabox bricht leicht ein Scharnier ab. Wenn es nur auf einer Seite passiert, hilft noch Tesaband. Sind beide ab, löst sich oft der Deckel und die Pillen fallen heraus. Hier…
Printer: Bambu Lab P1P Filament: Amazon Basics Silk PLA - Blue
Ovalrosette oder Schmalrahmenrosette mit PZ-Lochung 62x31x7.25mm Oval rosette or narrow frame rosette with PZ perforation 62x31x7.25mm
I liked Jonathan's design, and it fits my Mitutoyo calliper well, though upside down. This turns it over (right way up) with a slightly higher box at 7U and provides for a wider range of callipers. (My digital ones didn't fit the long…
The base model is great for things that fit tightly or are short, but thinner or taller things didn't work quite so well. Simple change, increase the depth of the holes.
Gridfinity holder with slots for generic calipers, a deburring tool, a utility knife, and a ruler. Also has an additional generic rectangular slot that fits the tube of metal grease that comes with the Creality K1C, but could fit any…
Blinddeckel für Steckdose 71x71x13mm
Fits the Aircraft NE Mini Pro / Hazet 9035M-5 needle scalers. The Hazet is the same unit, just rebranded. Not to be confused with the 9035M-6! If you installed a different fitting, it might need modification to accomodate that.
A simple dispenser designed for standard rolls of 50 Canadian Permanent stamps (approximately 36 mm outer diameter × 24 mm inner diameter × 29 mm wide). It is Gridfinity compatible (available in 1x1x7 and 1x1x8) and requires no supports…
Here is my solution to organize the 11g Loctite adhesive tubes. I designed one with a stacking lip for better storing when not in use. Additionally I designed a 1x1 unit for storing the standard mixing nozzles. EDIT: I revised the nozzle…
Quick & dirty model for an under desk clamp to mount the power unit of an Ugreen NAS (dxp4800). Fits 4,5 mm Wood-Screws with counter-sunk head. 0,28mm (draft), 3Perimeter, 15% Infill. PLA is fine if you are gentle when tightening the…
Cutout for Husqvarna chainsaw file . Used in Rugged Gridfinity Boxes .
Variations Clam Case 1x6 (Front Orientation) Clam Case 1x7 (Front Orientation) Clam Case 2x6 (Front Orientation) Clam Case 2x6 (Side Orientation) Both tackle boxes have rounded corners versions to reduce sharp edges but if you would like…
A fully stackable funnel to fill my Isopropanol-Spraybottle.
I liked Jonathan's design, and it fits my Mitutoyo calliper well, though upside down. This turns it over (right way up) with a slightly higher box at 7U and provides for a wider range of callipers. (My digital ones didn't fit the long…
The base model is great for things that fit tightly or are short, but thinner or taller things didn't work quite so well. Simple change, increase the depth of the holes.