147 models
VW Sharan I front seats railing replacement spacers / sliders. Modeled them as close to the original as possible, however I found that they are a tad too loose. They work great, there is just a little more play, you may consider printing…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
This model is compatible with the lego system.
Quick 3D model of TIV 1 I made 3D Printable, the mesonet is removeable so if you want it or not.
This part prints with PETG better than PLA but both will work. PETG seems to stick to the build plate better. You will need 5ea 2-56 Socket Head Cap Screw 3/8" long. It also reuses the screw from the old case but it will not hold the case…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
All credit to the modeller at the 3DWarehouse https://3dwarehouse.sketchup.com/model.html?id=57a7a9e163e8f087fe11eeaa72c8aa36 I was fortunate enough to have owned one of the fantastic bikes back in 2004. I may have to have a crack at…
This is a work in progress, but to make the digitigrade legs, you need an extra forearm piece to put on the bottom of the legs. I aim to make the four arms better than just the hips on the arm sockets like the official model. I really…
I modified an existing Honda door rod clip design (shout out to @akf_was_here ) to work on my 2004 Accord. I made the clips just a little more robust to help avoid snapping upon installation, made the hole a tad bigger, and scaled all…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
I resized this to fit the 2003 mini cooper base cup holders Print instructions Designed to fit 2003 mini cooper cup holders for larger drinks (McDonalds)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
As I had one knob as a reference it was not so hard to model one. The friend liked it so much that he replaced a second one also to make them even. It was a quick and dirty design, so it requires supports at the bottom (I would consider…
C'est un cache ampoule de plafonnier pour Twingo1 phase 2. Je l'ai imprimé en PTEG avec remplissage à 100%. Category: Replacement Parts
A simple offset board for the ULN2003A (green) motor driver boards that are available on AliExpress. I connect the board with 4G x 6mm self-tapping screws and then super glue in place on models as needed.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
ULN2003 Driver. Fichier .step avec le plan pour pouvoir l'ajouter à vos assemblages.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200mm sp. 3mm
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I provide the full model of the Audi a3 8p (2003-2005) with double frame front bumper, with realistic measurements. This is to open in FUSION 360 software so you can get the complete model.
fits my 4,7 magnum tristar from 03
Air vent shims designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. To install, pull up on the vents then outwards until they come out, then slot into the recess on the side of the air vent. After…
After (my wife) dropped the key to the 2003 Lexus ES300 one too many times, the key/fob housing broke beyond repair. This is a replacement housing. It turns out that the shape of the main key and the spare key is different at the housing…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
UPDATE again again: loaded updated 1:12 and 1:6 versions with improved barrel lines as they weren't very visible in small scale. I also thickened the sights too. Check the file list for "revision2" files. UPDATE again: loaded rescaled…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
🖨 RECOMMENDED PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Suitable for volvo xc90. I have installed the one to my car in place of broken LH 1882 & RH 1882 part. On the picture is the draft part to check the suitability on place. I'll print the proper color later.
ULN2003 5V Stepper Motor place holder include fusion 360 file for insert part shortened wire just for visual
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Snug-fitting cup and phone holder liners designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. I am aware the top rounded corners of the phone holder liner doesn't quite match the car's corner…
Cadillac Escalade ESV 2003, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made this about a month ago when the driver's side (you could mirror the model if needed) internal door handle on my 2003 Subaru Forester snapped one Sunday morning. At the time it was by far the most ambitious model I had attempted,…
2003-2007 Cadillac CTS model at 1:32 scale. The model can be printed in one piece, no assembly required. Print with supports. 10% infill is fine. A raft can help with bed adhesion, but is not required. This model is a heavily modified…
Wind washer fluid cap for the Honda Civic 2003
Left and right grille replacement pieces fit on each side of your rear license plate if you have lost or broken yours. Both include hole for tow hook. (I bought my Spyder used, with some pretty clever carpet square placement, but I've…
this is a mockup of the ULN2003 module Stepper driver for further 3D constructions.
Cale de fixation pour PCB du module compatible Arduino : ULN2003 28BYJ-48 4 écrous carrés M3 DIN 562 5.5x1.8 4 x Vis CHC DIN 912 M3x10 2 x Barrette 2.54 : 4 contacts Fixing block for PCB of Arduino compatible module: ULN2003 28BYJ-48 4 x…
This should fit most early 2000s Toyota climate control knobs. Tested in PETG to fit in a 2003 Toyota Tundra. Printed in PETG, 50% gyroid infill, 3 walls. Please let me know in comments if this fits other vehicles!
Replacement Key Shell for Subaru Legacy 3 (1999–2003) Tired of RFID issues? I’ve seen many replacement shells fail — but not this one! My design ensures flawless operation and a perfect fit. The two halves snap together tightly, no glue…
Panel for 1 din player and separated A/C control (mean original sound and climate control has 2 different board)
Modification of angles mustang model wheels thingiverse, https://www.thingiverse.com/thing:967959 This is the video of the final result of the impression
The metal holder rusted trough, so replaced it with PETG plastic. Been there for years now and it holds up to the abuse just fine.
Simple Keychain of the front of a bugeye WRX for those who love the cars.
Printed in with variable layer height with 0.1 at the chamfered edges, and 0.3 at the rest. Supports required. Open the freecad file and edit the length/width parameters in the spreadsheet to change the tolerances.
Dreamcatcher - 2003 3D printable model. Super easy to print. This is a large model, it will take some time and a lot of material to print.
Add wireless charging to your 4th Gen 4Runner (2003-2009)! Fully assembled kits and/or printed parts can be purchased on Etsy . There are two options with this design. You can have 1 or 2 chargers in the center console. It is designed…
Best printed in PETG or filament with higher melting point. Recommend 3+ walls and 100% infill due to slender size.
The Pontiac Vibe is a compact hatchback that mirrors the practicality and versatility of its sibling vehicle, the Toyota Matrix. Produced from 2002 until 2010 by the joint venture between General Motors and Toyota, the Vibe inherits…
UPDATE: loaded updated versions for better fit. look for files with revision 2 in name. If you would like to sell physical prints of my models please contact me. Hi, still an absolute noob but learning, I have here my take on the 2003…
PLA temp 220C° bed 70C° infill 25% 1 Stück Schraube M4 1 Stück Einschmelzgewinde M4
MagSafe Magnet bought on AliExpress: https://de.aliexpress.com/item/1005007153207698.html?gatewayAdapt=glo2deu
Can be used if you have a switch you'd like to install but hate drilling through those weak ass stock blanks.
This is a simple clip designed to hold the hood prop rod for a 2003 Chevy Venture. Material: PLA (but should use something more heat resistant since it's in the engine bay) Infill: 100% Supports: Yes, on both the top and bottom clip on…
I resized this to fit the 2003 mini cooper base cup holders Category: Vehicles
Mini ULN2003 Driver Board, designed to create your real scale models.
You can print it all using some FLEX/TPU filament at 0.2 but I did a version using FLEX for base and PET for the buttons. Doing a extruder change on layer at 1.00 mm and with 0.1 layers. If the base is too thick you can feel too hard to…
After my Pilots vents broke and paying the money to replace them, they managed to break again. I modeled them to be more robust than the original ones and they have held up really well. Vents are designed for right side but can be flipped…
This is a cap to fill the unused accessory buttons to the left of the steering wheel. In higher end Toyota models the buttons activate traction control and so on. The OEM cap and the first iteration of the design broke where the arms met…
I wanted a way to dry out and recharge a large number of desiccant packets, so I designed these racks for my PrintDry Pro. Two racks can be placed per level so the standard dryer can use up to four of these racks. The PrintDry manual says…
The new mounting holes should be pretty universal, if the mounting latches of your new speaker are too wide, you can add a negative modifier in Prusa Slicer adjacent to the existing cutouts I have put into the model. The holes for the…
Suporte feito para o instalação de milha projetor no chevrolet astra.
Had some coffee spilled in the car. So I made a cup holder for the inner central tray, took Starbucks' cups as a model base. Fits trays 15x15cm.
VW Tiguan 1 railing clip (N0200321) TPU A95 layer 0.2
Cleveland Cavaliers 1994-2003 Logo. turn on ironing. Use silk blue for light blue
New V3.1 Cradle Design for improved integration of Allsky Electronics, and fixation to main cone assembly. Includes additional fixation points for Driver boards and sensors for Allsky assemblies with additional features. See suggested…
For the two or three other people out there who own a 2003 Master Replicas Darth Vader lightsaber, you probably know the rubber grip pieces degrade and turn sticky over time. I've never been able to find acceptable replacements, so I made…
printed in abs and has been holding up well try and keep hardware from old one. mine broke i leant on it
Description As my BMW 320I touring (2003) was missing cup holder in the middle console I designed a replacement part which can fit on the original console. The original middle console can be easily removed using either a thin screw driver…
Description: This is a 3D-printable single DIN radio conversion bracket designed for the 2003 Dodge Ram 1500 (and compatible with 2002–2005 Ram models that use the same factory dash bezel). It allows you to mount an aftermarket single DIN…
Gauge Pod designed for 3D Print. Replaces OEM trim piece behing the steering wheel =retainment of cluster gauges. Fitment: -Honda Accord - Model Year 2003 - 2005 -Acura TSX - Model Year 2003 - 2005 -OEM FItment (no holes/trimining…
Bought a generic Brake Calliper Rewind tool supposed to be compatible with Ford models. Pins on the adapter (2 options) were both too far apart. This is an adapter plater for pins 20mm apart centre to centre. The Halfords near me, only…
3D PRINTING SETTINGS -Material: PET-G -Layer height: 0.2mm -Supports: Not needed
Print with any settings on any filament - ironing makes it look a bit nicer. Press fit - you should be able to carry this around. Intended for any project requiring multiple 28BYJ-48 stepper motors and thus multiple driver boards…
I designed this for the aftermarket audio unit that I installed in my 2003 Toyota MR2 Spyder. The dimensions are very specific to my need so I'm not sure how useful it will be to anybody else, but, I'm going to upload it anyway. Maybe…
Estes 2003 SDI Satellite Kit Nose Cone modded for printability Should be the original scale. separated into pieces and threading added. no support needed I print with 3 top 3 bottom 0.2mm layers 2 walls 5-10% infill (as light as you can…
A replacement bushing for ford pickup trucks 250-350s 1999-2003 made using TPU With a .8mm nozzle and 100percent infill. I Used a little oil around the opening and worked it until I was able to press it in.
The OEM rubber material goos up in a few years and jams the switch, and is sticky to the touch. Yuck. Print this in TPU, which should have a much longer lifetime. I use NinjaFlex TPU Filament…
Designed to move heater controls down a bit and make better room for my radio wich has a 10" screen. Should fit a normal 2DIN player, but heaters are positioned lower than original. Cigarette lighter hole is also ditched.
Best printed with ABS/ASD for strength.
Thick Frame guards for 2003 rm125 you need to drill a hole for the subframe bolt and zip tie it to the frame
This part is designed to take the exhaust from the xTool S1 and feed the fumes into a Fumeclear FC-2003. This silcone adapter works but I wanted to short the run for the exhaust, so this part allows for that. This may work for other…
A keychain of an Audi A3 8P
Hinge of central console box, upper part. I'm use PETg, but you can try other filament.
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Fog Light Mounting Bracket for 1999-2003 Subaru Impreza. This is right one, for left one mirrior all of it (even the "pins") in slicer. It is not perfect but it worked for me.
This is a rugged design model key fob for a 1999-2003 Acura TL
These models are part of a series where the competitor is provided 1 - 2 drawings and you have to complete it in an alotted time. The original drawings are former test type questions, I did not create or design those, however, I created…
Replacement shift linkage for the 2003 Chrysler grand Voyager
I Designed this Item using Free Cad. It interfaces with a square hole that is 8mm by 10 mm. The ball joint is caught by a double spring steel clip that acts like a socket for the ball. The clip art o the file interfaces nicely with the…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
This is a replica of figure A from the box "Dwarves", number 2003 from Grenadier (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:G-asfs-2003d.jpg&oldid=216901 ) "w/ Short Sword". Reproduced using…
If you’ve lost one of the plastic pins that secure your Opel/Vauxhall Signum’s cargo cover, you know how frustrating it can be to lose trunk privacy. I faced the same issue after a trip to the car wash and decided to solve it by designing…
A backplate to hold up to 4 (2x2) uln2003 stepper motor drivers (for motor 28byj-48). A common +- paralel breadboard power line can also be inserted.
